Having problems with your Dishwashers ?

Hello expert, We are having a new kitchen floor laid and the contractor moved the Whirlpool dishwasher out to lay the floor under. Since it was replaced into it's normal under the counter spot, green "clean" light flashing in succession with a brief stop then starts again. Not really bothered as long as it worked, but of course it doesn't work - What do you suggest?? P.S. Had a problem app. 2 years ago when someone backed into the control panel, also ceased working and repairman charged ex


Answers :

Someone grabbed the control panel and knocked it around or flexed it whist moving it in and out of your counter.
\015\012
\015\012Either the PCB board behind the little buttons flexed and cracked, or the ribbon cable that connects the PCB board to other componets inside there has puled loose...
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hello expert, We are having a new kitchen floor laid and the contractor moved the Whirlpool dishwasher out to lay the floor under. Since it was replaced into it's normal under the counter spot, green "clean" light flashing in succession with a brief stop then starts again. Not really bothered as long as it worked, but of course it doesn't work - What do you suggest?? P.S. Had a problem app. 2 years ago when someone backed into the control panel, also ceased working and repairman charged ex


Someone grabbed the control panel and knocked it around or flexed it whist moving it in and out of your counter.\015\012\015\012Either the PCB board behind the little buttons flexed and cracked, or the ribbon cable that connects the PCB b ... Dishwashers

Hi. I have a blomberg dishwasher. it doesnt working and has a message: call service. we found that the bottom of it, on the floor is watery. what is the problem??? what we should do??


... Dishwashers

I have a mh65m2 moyer diebel dishwasher at the resturant and some days it works great and other days it doesnt but here in the past two weeks it hasnt been going threw all the cycles one day it stays in the rinse cycle and other days it stay in the soap cycle is there anything i could do to restart the machine or fix it because it is really starting to cause the restuarant trouble? please help me if you can.


... Dishwashers

My Maytag PDB3600AWX isn't working. The motor hums as if its working but no water is in the tub. I did put a pitcher of water in the tub to see if it would pump out and it does. I don't know what else to check for. We have had lots of problems with this dishwasher, its never washed the dishes well and has flooded my kitchen to the point of having to replace flooring. I thought its was because we had just had new flooring installed and when they put the dishwasher back in the counter the hose was


... Maytag PDB3600A Built-in Dishwasher

Hi, We have a Smeg ST 663 dishwasher that does work. However, sometimes when you want to use it and turn the power button on it beeps twice with the red light flashing and you can't get it to work or change the settings. Sometimes if we leave it for a while and try it again later it will work, but it is annoying as sometimes it won't want to work for ages and we really want our dishes cleaned! The dishwasher doesn't have many buttons on it (a power button, cycle selection button and 1/2 load


Hi,\015\012\015\012Turn machine on and press and hold the programme select button till the light goes out about 5-7 seconds see if this resets it if it does start a cycle and see what happens.Otherwise the pcb as its not responding to an ... Smeg Dishwashers

The spray from the pump doesnt hit the top rack and it doesnt clean the bottom rack effienctly. the pumps works and it does spray some but the sprayer in the middle doesnt extend all the way up


... Frigidaire 18 in. FDR252RB Built-in Dishwasher

Frigidaire 2405 Dishwasher has a direct drain into the floor and is too far from the sink to be able to drain into the sink pipes. Can I add a loop of drain hose from the floor drain up to the counter height, about 30", then back to the floor to mimic the loop that would be created by running to the sink drain? I have been told that these new types of dishwashers require water remaining in the pipes to work properly. Thanks, John


There will be no problem with you adding more drain hose to the unit. ... Frigidaire Dishwashers

I have a whirlpool GU1200 that I purchased on Craig's List. The unit worked fine for a few months. Then, I removed it to replace the floor. When I reinstalled it a few days later, it only works in quick wash and pots and pans modes. Some of the other panel options don't seem to work any longer either. Any ideas?


... Whirlpool GU1200XTKS Dishwasher

Greetings! My Bosch SHE3305UC/UC12 has worked faithfully until last week when we had to pull it out of its home to retile the floor. Upon reconnecting all of the connections, it no longer works properly. The initial drain cycle works, so the flood switch is fine. But after draining, it just quietly hums. The test cycle actually seems to move to the next step for about 30 seconds, before also just humming. I'm thinking I need to check the valve, but not sure how to do it on this mod


Hi\015\012\015\012The hum sound indicates a bad motor and it should be\015\012replaced. Hope this helps...please post back for further assistance.\015\012\015\012Daniel ... Dishwashers

Hi, I've got a dw 681es wh nemo dishwasher. I turn it on, it starts working but it sounds funny....and nothing happens. after a while the start/reset button flashes and then it doesnt continue. Any clues? I start it on the quick wash cycle but it quickly flicks to the rinse cycle when this problem occurs. I used to just reset and it worked again but now it just wont work.


... Fisher and Paykel Dishwashers

WE MOVED IN OUR HOME 17 YEARS AGO. THE GE POT SCRUBBER DISHWASHER HAS ALWAYS WORKED VERY WELL. RECENTLY IT STARTED TO LEAK UPON USE. FIRST OUT OF THE BOTTOM IN FRONT, ALL OVER MY FLOOR AND THEN IT STARTED TO LEAK THROUGH THE FLOOR AND I CAN SEE IT DRIPPING FROM THE CEILING IN OUR BASEMENT ? SHOULD WE GET IT FIXED OR WOULD THAT BE TOO EXPENSIVE?


If your dishwaher is 17 years old I would say it probably should be replaced. ... GE Dishwashers

Hi, I have a Fisher and Paykel DD603 dishwasher. The bottom drawer works fine but the top drawer doesnt work at all. It appears normal until the start button is pushed and then I get 3 very quick beeps followed but a 4th slightly longer beep. Then nothing happens, any ideas or help would be much appreciated. Thanks Neville.


... Fisher and Paykel 24 in. DD603MFC Built-In Dishwasher

I have Karcher 520m and when you press the trigger you can hear what sounds like a relay engaging but there is no water pressure, then it will fire up and work, but next time you press the trigger the same thing happens, I have been using it on harvested water, but even connected to the mains it does the same thing. Its now got to the stage it doesnt want to work at all.


The issue you are having is with the unloader valve in the pump. Now with the 520m it is a little bit harder to repair than with more gasoline powered pressure washers but it can still be done. It would be easier if I could just send you a email of t ... Karcher 1750 Psi Elec Pressure Washer

I've had a Miele G892 SCU PLUS dishwasher for a long time. Today a problem started that results in a flooded floor. Water keeps flowing into the dishwasher - even when the unit is turned off. It seeps in very slowly, but within15 minutes there is enough to overflow & flood the floor. My guess is that there must be some kind of sensor that isn't working, or the coresponding mechanical switch that shuts off the water is worn or slightly stuck open a bit? Anything I can do / check, short of the re


... Miele Touchtronic G892 Built-in Dishwasher

I am an Australian who has bought a second hand Defy Dishmaid dishwasher from a South African work mate. It is a 2/3 year old machine that he bought over from South Africa. When he moved into a new house the machine did not fit his kitchen bench opening much to his frustration so he sold it. When placed in my kitchen it was a tight fit and upon recent inspection the floor pan of the unit, it may have buckled. It worked well until recently when we did some renovations when I needed to remove


Hi\015\012\015\012This means that the dishwasher is unable to drain water completely, you can run your washer at\015\012its hottest temperature setting with 3 cups of vinegar inside the unit. After\015\012this take off ... Dishwashers

The dishwasher was recently removed for floor refinishing and reinstalled. The bottom rotor works but the top rotor does not. I asked the re-installer, who worked for the moving company, if he had connected everything properly and he said there was just one water line going into the machine and assured me he had connected it properly. Is there something else that needs to be done to make the top rotor operational? Thanks. John M


... Jenn-Air JDB3610 Built-in Dishwasher

BEKO DE2431FS DISHWASHER BOTTOM WATER SPRAYER WORKS BUT THE TOP 1 DOESNT HARDLY WORK ANY ADVICE


... Frigidaire 24 in. FDB126RB Built-in Dishwasher

I have a smeg dishwasher df612sdx the lights come on but it doesnt start when you push the start button. The 3 hr 6hr and 9hr timer doesnt work and if you switch it off and on it moves through the programmes but no sign of life. Thanks


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. As the lights are working then it means that the control panel\015\012is working fine. This issue can be ... Dishwashers

I have a neff dishwasher that is maybe 5 years old. im pretty sure there is nothing wrong with it as it was working perfectly fine before i had a plumbing problem a few days ago. after the plumbing problem was fixed the dishwasher doesnt seem to want to fill any longer. it sounds like it wants to work but its just not filling and going thru the cycle. does it just need to be reset or something? im not sure of the model number as ive misplaced the directions for it. could you please help? by the


Look for the connection from the valve to the inlet of diswasher. Check the hot water valve to be on. It is probably closed when anyone working on the plumping. Good luck. ... Neff 24 in. S5443X2 Built-in Dishwasher

I have a Whirlpool Model DU943PWKQ0 dishwasher. Several of the controls on the front panel no longer work, ie normal wash, cnacel and drain, etc. Others like heavy duty wash work perfectly. It appears the most used are what is not functioning. My question is should I replace the Microcomputer assembly part number 8530929 or the Console (with overlay) part number 8274732. Can you help as I cannot really afford both!


... Dishwashers

GE Quiet Power 3 dishwasher stuck on rinse cycle. Pressing reset doesnt work, trying to start wash cycle doesnt do anything. Any ideas?


... GE Dishwashers

I HAVE A BOSCH SHU5305 DISHWASHER THAT WHEN IT IS TURNED ON IT WILL NOT DRAW WATER FOR THE WASH. IT JUST SITS THERE AND HUMS. HAD A BIT OF WATER FROM THE SINK BACK UP IN THE DISHWASHER AND SPILL OVER ONTO THE FLOOR YESTERDAY. I CLEANED THE DISHWASHER FILTER WHICH WAS COMPLETELY CLOGGED. I THINK THE DISHWASHER WORKED FINE PRIOR TO THIS INCIDENT BUT THIS COULD ALL BE COINCIDENCE. I DON'T KNOW IF I HAVE A PLUMMING PROBLEM OR A WASHER PROBLEM. THE SINK WATER WORKS FINE. I CHECKED THE ON/OFF WATER VA


If the solenoid valve is humming and calling for water, you probably have a plugged screen in the valve, some you can get to and clean, some you have to replace. ... Dishwashers

DD602 model. while running upper washer appears that the seal/gasket around the whole upper is not working as water makes it out of basin and on to the middle shelf, then drips on floor. is there a way to test/double-check that the gasket is filling with air? any other ideas.? bottom basin works fine.


I had a air leak so that it would fail to keep a seal.To find out what was going in a made up a hose, which I could put in line and fitted in a pressure gauge.  It showed that the pump was pumping, but the exhaust valve had a small leak. ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

My dishwasher has stopped working, water goes out but doesnt come in so it doesnt wash, can you help?


Hi,\012Here is a tip that will help you to find out why water will not come into thedishwasher... Dishwasher Trouble No Water entering Dishwasher ... Whirlpool 24 in. ADP5740 Free-standing Dishwasher

Buttons not working, on/ off and dishwasher is less than three years old-see ms like a poor design- Maytag needs to recall or give compensation otherwise company will lose the business. I will never buy any Maytag brand in future. My dishwasher and microwave stopped working. It really frustrating and decided to launch a complaint to maytag soon--Would recommend to stop buying Maytag product in future


... Maytag 24 in. MDBH955AW Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1019 seconds