Having problems with your Dishwashers ?

IS THERE AN INTERNAL BREAKER OR FUSE INSIDE A MAYTAG wc202

\015 IS THERE AN INTERNAL BREAKER OR FUSE INSIDE A MAYTAG DISHWASHER wc202 MINE WAS WORKING FINE, BUT TODAY, NO ACTION IN ANY OF THE ROTARY CONTROL POSITION. i CHECK THE POWER AND ERVEYTHING IS ALRIGHT.\015

Answers :

There is no fuse in this unit.

If unit has power but it is not cycling, then test wirings and circuit board.
Try first unplugging and plugging back the unit.

If there is no power at all , and the machine gives no sign of life, test the power cord and and the control assembly. In UK and other country there is also a fuse inside the power cord plug.

Here you find all diagrams and parts for your appliance <Click to open>.

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

IS THERE AN INTERNAL BREAKER OR FUSE INSIDE A MAYTAG wc202


There is no fuse in this unit.If unit has power but it is not cycling, then test wirings and circuit board.Try first unplugging and plugging back the unit.If there is no power at all , and the machine gives no sign of li ... Dishwashers

My Maytag dishwasher model MDB600AWB, serial 18721619CN Quiet Series 300 will light up on the panel except for NORMAL WASH and START. It will not run. All other buttons work. It displayed the number 9 and the RINSE ONLY light came on after we got off the phone with Maytag. Initially nothing would light at all. We changed the fuse (it is NOT on a breaker) and it again didn't light. A few minutes later it did light the above mentioned buttons.


... Maytag Dishwashers

I have a shu43 bosch dishwasher and the whole machine is dead. No power. The circuit breaker is good but I would have to pull the dishwaher out to check the outlet. Is there an internal fuse?


There is no internal fuse (at least I've not seen or replaced any) on Bosch dishwashers. The most typical problems for Bosch are: 1) one of the power cord connections to the internal wiring is corroded and doesn't make a contact; or 2) the power butt ... Bosch 24 in. SHU43 Built-in Dishwasher

We have a 6 year old Jenn Air dishwasher model JDB2150AWP We had a cracked door close unit which we replaced but got a short while restoring connections I am wondering if there is an internal circuit breaker, relay or fuse on these machines that we need to check and possibly replace since we cannot get it to run at all. No power or lights at all. I believe all connections are secure and we replaced the door close unit with new parts.


... Jenn-Air 24 in. JDB2150AWP Built-in Dishwasher

No light indication/power, will not start. I checked the breaker. is there an internal fuse ?


Yes!Hope your power cord moulded plug in good condition. ... Bosch SHU5315UC Dishwasher

Kenmore elite 13852 will not show any lights. looks like no power but checked breakers in basement and everything looks good. Is this a bad door switch or is there a bad internal fuse? Thanks for any help!


INTERNAL FUSE,but most of them dont have a fuse and it is the controll panel...check with volt detector that you get power to the control panel if you do ..then its the panel if you dont , its the conection to your macine. good luck ... Kenmore 13859 / 13854 / 13852 Dishwasher

For the GE 24 in. GLD5560LSS Stainless Steel Built-in Dishwasher, I reset the breaker on the service panel, the unit is on but I press a wash cycle and press start and nothing happens. Is there a fuse inside the control panel of the dishwasher?


... GE 24 in. GLD5560LSS Stainless Steel Built-in Dishwasher

The dishwasher acts as if there is no power. There is power to the recepticle. No lights, no nothing. Is there an internal fuse or breaker? It has been running fine for ~8 months.


... Kenmore 1348 Builtin Dishwasher

I,ve got a prima LPR450 and it won't switch on, i've checked the obvious things like the fuse, circuit breaker and wires in the plug and they ere all fine. when i push the power button there is a faint clicking sound from inside the door.


... Dishwashers

House circuits OK, power to unit. No power within dishwasher as if it was not pluged in. Is there a circuit breaker or fuse inside? the modle number is WP920?WDB4. (The Question mark is unlegible)


Did you check the door switch for continuity? That will kill all control power. Just a thought.\012 GOOD LUCK ! ... Whirlpool DP920PF Dishwasher

An electrical panel breaker switch was replaced after the microwave and dishwasher both lost power. The microwave works after replacing the main panel breaker. However the dishwasher will not show any power. Checked the internal circuit board, no burned areas, cannot find an internal GFI reset, what can I do to get power restored to the main control panel or even the unit itself? Rick C


1)check any fuse in the circut board.(blown off)\015\0122)check any loose connection of neutral (or)phase wire to the machine(or)in the switch. ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Location of fuse in maytag dishwasher


... Maytag Dishwashers

SAMSUNG SMH8187STG No power. The door latch broke so tried to manually turn off the internal light. While pushing the small switch al of the power went out. Checked the breakers, no luck. Any ideas


... Dishwashers

Servis Dishwasher Servis M4306S-C location of internal fuse. Light on door flickers but dishwasher will not function? Manual suggests that the internal fuse may be broken but does not inicate where to find it???


\015\012\015\012\015\012\015\012If your dishwasher doesn't work at all, check these:Power from the house ... Servis Dishwashers

Hi I have a bosch diswahser smu 7000. No power when I push button. Manual says its could either be fuse or circuit breaker. Checked breaker its ok. My manual does not say anything about location fuse. Called bosch. And they said they cant tell me. I nee to have a service call. Any help. Thanks.


... Dishwashers

IDL750 - Fuse trips when turned on. HELP! We had some electricians here to install a new electrical socket for a new fridge. They put the new socket in the same wiring as for my existing dishwasher!! The first time I tried to start the dishwasher cycle with the new fridge plugged in, the circuit box fuse tripped. Now, even with the fridge turned off, the dishwasher makes the fuse trip when turned on. Is there a fuse inside the dishwasher that has blown and needs to be replaced? or a ground brea


Hi.The first step is understanding if the problem is the socket or the appliance. Find an extension long enough to reach a different socket. Move the appliance to reach the power cord, and connect the dishwasher to a different power sock ... Indesit 24 in. IDL700 Built-In Dishwasher

Kudc10fxss4 I have a KitchenAid KUDC10FXSS4 w/o any power. Circuit breaker is on, and it's getting power. But there are no lights on the display. I called a parts place to see if I could order a thermal cut off fuse. But the representative stated there is no fuse listed for this model. Any ideas on what would be causing a loss of power? Seems odd/wrong to me that there wouldn't be a fuse. If there is a fuse, would it be located in the door (the control is built into the door, such


... KitchenAid Dishwashers

I have a Maytag MDB dishwasher. We recently took apart the spray arm assembly down to the filter to clean out the lime. The problem is that the inside of the spray arm has such a build up of lime and we cannot get inside the narrow space to scrape the lime out. How can I dissolve the lime that is inside of parts?


Have you tried boiling it in vinegar? it might help. no garenties for that particular problem, but that's what I do with my kettle and chunks of lime come out when I do. ... Maytag MDB9600A Jetclean II Built-in Dishwasher

Kenmore elite dishwasher stopped in middle of cycle with water still inside. Checked breaker. Replace the hole control panel, door latch from a used kenmore elite. Work for half a cycle and quit with water still inside just like the first time.


Here's your solution (free PDF) - Kenmore Elite Dishwasher Manual ... Kenmore 24 in. 16352 / 16354 / 16359 Built-in Dishwasher

Maytag quiet series 200 wont start, no lights on control panel,power is on, breaker tripped, flipped breaker back, other appliance on circuit works


... Dishwashers

Is there a product on the market that I can use to clean the inside of my Maytag dishwasher? We have very had water and there seems to be a hard crusty film build up inside. The dishes are not as clean aas they should be.


Hello \015\012\015\012I have used Vinegar myself.\015\012 just placed a large cup full in the top rack and ran it through with no dishes in the dish washer.\015\012and once the dishwasher was clean we used a small ... Maytag Dishwashers

Whirlpool dishwasher Model#GU3200XTPS0 No power to unit, Control panel does not have power check the circuit and outlet, are OK. is there any fuse inside the unit? is circuit board has any fuse?


... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

Not turning on front panel not working, maybe fuse blown,are there fuses inside door panel


No there is not. Just a relay. You can test it with ohmmeter. If tested ok, then panel or wiring is faulty and can be checked with multi-tester/voltmeter/ohmmeter ... Maytag MDB7100AWB Dishwasher

I am trying to problem solve for dishwasher that is properly installed and is not working or even responding to being hooked up electrically. My husband tried to wire it and unfortunately wired it incorrectly the first time around (there were sparks and it blew the breaker.) We are thinking maybe it blew a fuse? Do they have fuses that can be replaced? I sure hope so! Help!!! -Alicia


No matter what brand it is the unit must have been hooked up power to ground to make a spark when turned on.they dont have a fuse to protect them, but what may have happend is you could have shorted out a door switch.be sure that you hae ... Dishwashers

The contol lock LED is illuminated on the front panel of my Maytag dishwasher. (Neither my wife nor I pressed the control lock for 3 seconds!) We've tried to extinguish it by pressing it for 3 to 5 seconds, but it remains ON. We've turned off the breaker to the dishwasher overnight, but when we turn the breaker back On, the contol lock LED comes on. We simply can't unlock the control panel. We can tell that all of the other buttons work just fine because pressing any of them causes the 3 Sec LED


If by pressing the control lock button for 3 seconds does not solves the problem.then there are 3 possibilities due to which this problem may occur\015\0121)the door is not closing properly. the dishwasher door latch is either cracked internally or t ... Maytag Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0847 seconds