Having problems with your Dishwashers ?

Whirlpool dishwasher chopper blade

\015 My whirlpools dishwasher quiet partner 3's chopper blade screen keeps getting clogged. I think it is because the shaft the propels the chopper blade is not spinning the blade. The unit is about 8 yrs old and I am just thinking about replacing it. Can I remove the chopper blade and still use the dishwasher? I have a garbage disposal hooked up to the dishwasher don't know if that helps.\015

Answers :

You can replac the chopper as a seperate part, but will quickly clog, and destry ohter parts of the unit if removed. dont take this the wrong way but if you have a garbage disposer already rinse the dishes better to avaid further clogging of chopper
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Whirlpool dishwasher chopper blade


You can replac the chopper as a seperate part, but will quickly clog, and destry ohter parts of the unit if removed. dont take this the wrong way but if you have a garbage disposer already rinse the dishes better to avaid further clogging of chopper ... Dishwashers

Whirlpool chopper blade completely inaccessible


Hi,Sorry you are having trouble, I put together some instruction for this issue. Take a look and let me know what you think. I would be happy to clarify anything that is confusing. ... Dishwashers

Whirlpool dishwasher top spinner and top rack spinner is not putting out water or very little and not spinning. I have taken apart and cleaned everything including the sump / chopper, can't find any blockage in the tubes that deliver water from the pump to the spinners. Is the Pump or Motor done? how can that be it's less than 5 years old? Its a Whirlpool Quiet Partner I Model DU1055XTPQ3


First, confirm that the holes are not blocked on these arms. (I did not want to assume you have done this.)Then check the impeller on top of the motor stem for being loose or worn/damaged - to rule the impeller out. If it is fine, then ... Whirlpool 24 in. DU1055XTP Built-in Dishwasher

Sears kenmore dishwasher; model: 665.13763K600 (made by Whirlpool). Dishes have debris after washing in all cycles. Arms spin, water is running, dishwasher drains, and I removed the sump assembly to clean the chopper inlet. How do I diagnose it. I put it into diagnostics cycle and am unable to identify the issue.


... Kenmore 24 in. 16012 Built-in Dishwasher

I have a Kitchen aid tall tub dishwasher model #KUDCO3IVWH Yesterday the top rack didn't clean, today both racks stayed dirty - took apart the food chopper assemble and notice that there is water in the well is it ok to remove the food chopper blade? what else could be wrong


Hi,Check your heating element.. \012A bad heating element causes many problems in dishwashers…Dishwasher Problems The ... Kenmore 16372 / 16374 / 16379 Built-in Dishwasher

Dishwasher GU1500 Whirlpool--motor just hums and blades do not turn. Dishwasher fills correctly and drains well.


This strongly indicates the motor capacitor - normally mounted on or close to the motor. easy to replace and a cheap part. also possible motor seized - disconnect from mains and see if motor turns by hand ... Dishwashers

ADP4307 dishwasher manual user manual. Locating and removing chopper blade assembly


... Dishwashers

How to re-assemble the chopper in a whirlpool gold series diahwas


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

How to install chopper assembly - Whirlpool GU2400XTP Built-in Dishwasher


... Whirlpool GU2400XTP Built-in Dishwasher

Replace chopper assembly - Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher


... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

How to remove the cover that contains the internal chopper blade,Model#665.16379300, Serial#FP470474, Type 5750 Kenmore Dishwasher


... Kenmore Dishwashers

I have a whirlpool GU2700XTSQ1 dishwasher. I have the typical top rack not cleaning problem. I have removed the rear washer tube that leads to the top sprayer, no clogs. Upper arm is clear, lower arm is clear. I also removed the lower cover, checked the chopper screen and inlet, no clogs. There is a screen inside that I cannot get to. It appears to have some sort of paper or cloth sticking through the screen with a 50% block. Perhaps a sticker or label from a dish. I see this screen when looking


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

Hi my whirlpool dishwasher adg 450 won't work, I turn it on an it makes a noise asif its working but then it starts beeping then starts them stops an beeps.so on, then a red light comes on with a picture of like a sun.there no water and the blades have not moved


... Whirlpool Dishwashers

I have a whirlpool dishwasher ADP 5540 and the top 2 blades dont seem to go round...Any ideas?


Check botton sprayarm for crack, hole clog up an make sure the tower is under upper sprayarm ... Whirlpool 24 in. DU915PWP Built-in Dishwasher

Whirlpool DUL200PKQ1 dishwasher won't drain. There is nothing blocking the drain and I've installed a new chopper-impeller kit. What's next?


Hello there \015\012during the extraction cycle their is a drain solonoid valve that is supposed to open and let the water out, and the extraction pump will pump it out, so knowing this first when the unit gets to the point where it is supp ... Dishwashers

I have a type 280-2 Whirlpool dishwasher. When the cleaning cycle begins, the sound is exceptionally loud. I checked to see if the blades could move freely and they do. Not sure how to begin troubleshooting


... Dishwashers

Whirlpool dishwasher model du915 built-in problem


Hi,\015\012 I've had a look at the Whirlpool site for detailed information for you, but they seem to want you to buy a pump assembly complete. Not very helpful.\015\012If you type your exact model number they may come up with a spares kit ... Whirlpool DU930 Built-in Dishwasher

My Maytag MDBH965AWW Legacy Series 300 is making a loud grinding noise. I took off the lower spray arm and other parts below it to see if something was lodged near the chopper blade. What I found was broken plastic pieces from the bottom of the filter/flowplate assembly. It appears that the chopper blade is coming in contact with the filter/flowplate assembly and therefore the chopper blade is chopping away at the bottom of the filter/flowplate assembly. What do you think the problem is? Ho


Here is the break down view of what you have. The only way to fix this is to get to the chopper and tighten things up. Look at the photos and you can see the chopper and how to do it, it's a bit of a job...Remove Chopper Sleeve by using I ... Dishwashers

Should knives/forks/spoons be loaded with blades, tines,bowls down or up in dishwasher? When ready to load knives/forks/spoons in the dishwasher, should you load the utensils with the handles at the top, or should the handles be at the bottom with the blades of knives, tines of forks, and eating portions of spoons be placed face down in the dishwasher? Simply put, should the handles of the utensils be placed up or or down when you load them in the dishwasher?


I find they come cleaner with the handles down, but if you have kids they come clean enough and are safer loaded with handles up, with spoons though, always load handles down so they can get the clean water to the whole spoon. ... Frigidaire FGHD2433KF Builtin Dishwasher

I have a kitchenaid model KUDS01JBT dishwasher. The Chopper Assembly keeps pluging up causing the dishwasher not to wash properly. Can I remove the chopper Assembly and run the dishwasher without causing any further problems to the dishwasher or will it cause other problems with the pump etcetera? Thank you for your assistance. Sincerely, Pat


\015\012\015\012Check the water temperature. Should be 125 to 140 F. \015\012\015\012Check pump re-circulation., Listen, see if it sounds like it is spraying the water around with enough pressure. ... Dishwashers

Whirlpool gold dishwasher standing water - Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Whirlpool dishwasher My son put Dawn dishwashing detergent in my Whirlpool dishwasher. How do I clean this out and will it hurt the motor??


It will not hurt the DW, just make ALOT of suds. Get some defoamer used for spa tubs. Use a little at a time, fill, let it wash for 10 seconds then drain. Repeat if necessary until sudsing is gone. ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

I just bought a whirlpool model DU1014XTXQ dishwasher from Lowes. I got half unpacked from the box before I noticed their was no sound insulating blanket. To help me decide weather to return it before I install it, I have 2 questions; How quiet is this dishwasher without a blanket? (subjective...I know. Also can I install the blanket from the old dishwasher over this new model without adverse consequences? I tried to get these answers from Whirlpool but all they could tell me was that it doe


Hello. I have been installing dishwashers for 35 years. Whenever the new one lacks a blanket I take the blanket off of the old unit and apply it being careful to trim it if necessary. I always use a good quality duct tape to make sure the blanket ... Whirlpool Dishwashers

I just bought a whirlpool model DU1014XTXQ dishwasher from Lowes. I got half unpacked from the box before I noticed their was no sound insulating blanket. To help me decide weather to return it before I install it I have 2 questions; how quiet is this dishwasher without a blanket? (subjective...i know. Also can I install the blanket from the old dishwasher over this new model without adverse consequences? I tried to get these answers from Whirlpool but all they could tell me was that it doesn't


... Dishwashers

Whirlpool disher whirlpool dishwasher clean light blinking all the time cannot start whirlpool dishwasher


Run diagnostic by pressing Normal, heated dry, normal, heated dry, normal heated dry. a total of 3 times in 15 seconds. The dishwasher will reboot and run a test load. ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1873 seconds