Having problems with your Dishwashers ?

Heating fault Westinghouse SB915SJ*00 dishwasher

\015 The unit goes completes the normal cycle but there doen''t seem to be enough heat. Poor wash and drying\015

Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Heating fault Westinghouse SB915SJ*00 dishwasher


... Dishwashers

Westinghouse Dishwasher Model SB907W5*08 the dishes are not getting cleaned & it appears that it is not heating as i bought a bottle of dishwasher cleaner & the dishwasher is supposed to heat up enough to dissolve the lid off the cleaner to let the fluid out. after putting the cleaner through a cycle the cleaner lid was still there. i think this must mean that the heating element is broken? this is out of warranty & can't remember how much it cost us so don't know whether better off gettin


Hi\015\012If you are observing that the dishes are not clean, then you'll need to follow certain steps to be sure where exactly the issue. First thing to check for is the detergent cup and spray arms. Check if the dishwasher's spray arms are w ... Westinghouse 24 in. MDP531 RF Free-standing Dishwasher

Westinghouse Silhouette 906 dishwasher cuts out after pre-wash, sometimes goes through cycle to rinse, then cuts out. Obtained service from sole dishwasher technician in Ballarat - he was very discourteous, claimed to have corrected fault, charged $125.00. Fault not fixed - that was many months ago but don't want him back. Please advise


... Dishwashers

Ken wood kdw60w10 dishwasher no hot water, there seems to be no power to the inline heating element, showing 30ohms resistance and power directly applied when removed from the dishwasher and it heats up. No fault codes on panel, works normally apart from no hot water, any other ideas? Many thanks


... Dishwashers

Kleenmaid dishwasher model no. dw34x shows heating fault but there is no heating fault wat should i do??


... Dishwashers

I have a kenwood dishwasher kdw12sl3a. It shows fault E3. It states in the manual that this fault means longer heating time but not reaching required temp and its a malfunction of temp. sensor or heating element. Is there anything I could do to fix it or will it have to be sent back.


Aye have same problem!? how did ya get it fixed if ya did thanks ... Dishwashers

Dishwasher is model DWD1SSE type11045 Initially the dishwasher leaked water on the floor On investigation the bottom tray under the dishwasher was wet The motor was wet Tested the motor which was fine although the capacitor on the motor impellor was dead. Replaced capacitor, now no water going around the spray heads so found the impellor inside broken. Replaced that. No hoses are leaking. Machine now works fine heats up etc etc but over fills and the E5 fault shows


... Smeg 24 in. DWD1SSE-1 Built-in Dishwasher

I have a Kenmore Elite dishwasher (model 665.1315), and the dishwasher will run through the wash cycle as expected, but when it gets to the heated dry cycle , it doesn't appear to dry. It will then flash a fault code 81 (8 short flashes of the 'clean' light, pause, and then 1 more short flash of the 'clean' light, longer pause, and repeat the code). The dishes seem to be somewhat dry, but there is certainly water on the dishes and on the tub (there is never any water standing in the tub, and t


Hi,Check your heating element.. \012A bad heating element causes many problems in dishwashers...Dishwasher Problems The ... Kenmore 24 in. 15932 Built-in Dishwasher

Water does not heat up in dishwasher - Westinghouse Dishwashers


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012Can you possibly provide a model number of the dishwasher you are inquiring about. Perhaps you can also confirm it is indeed a Westinghouse as well.\015 ... Westinghouse Dishwashers

I have a diplomat adp8332 integrated dishwasher showing an F3 fault code.I dismantled the door casing and found that the wiring sheath had split and cut through 2 wires.I have repaired the wires and fitted a new sheath,the F3fault code still appears(no heated water and only rinse cycle)Could the PCB have part blown or the heating element?


... Dishwashers

My smeg d1612c dishwasher is stopping at the rinses cycle and not doing anything no fault code is showing. The dishwasher is heating up motor is rotating and pump is working. can anyone help


... Smeg DWD612C Built-in Dishwasher

Westinghouse dishwasher WDF901 not heating water


... Westinghouse Dishwashers

Westinghouse Dishwasher SB907 does not heat the water


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

I have a Westinghouse Dishwasher. The water will not heat. what could be the problem


It's very possible that your heating element has gone out on this unit.\015\012\015\012Please contact us at:\015\012\015\012 ... Westinghouse 24 in. MDB421 RF Built-in Dishwasher

I have a Diplomat ADP8242 Dishwasher that continues to run during its wash cycle. The machine starts and heats up correctly but will not switch to its rinse cycle and just keeps running with 2 intermitent beeps. I have tried to reset the programe which does pump the water out and resets the control panel, but unfortunatly does not clear the fault. Can you help?


... Dishwashers

Repace inline heating element on a sb907sj00 - Westinghouse Dishwashers


... Westinghouse Dishwashers

Dishwasher problem Hi We have a Whirlpool GU 2300, the machine has stopped and is the clean LED on the control panel is showing a 7 pulse sequence which I guess is a fault alarm. I have tried resetting, checked the door switch and looked at the pressure sensor at the drain pump outlet. I changed the heating element and fitted an uprated control card earlier this year. Any ideas?


I solved the reset by pressing the air dry and reset buttons 6 times in sequence, the whole panel array lit and I was then able to reset. I have had no problems since and have used it 6 times. I initially thought that the chipset had a volatile memor ... Dishwashers

HOTPOINT LFT114 DISHWASHER, FAULT ON/OFF LIGHT FLASHES +THE 50C ECO LIGHT FLASHES & NO HEAT. IS IT JUST THE ELERMENT . mANY THANKS FOR YOUR TIME.


... Hotpoint 24 in. HDA3740G Stainless Steel Built-in Dishwasher

Bosch Logixx dishwasher gets stuck on either wash or final rinse programme and runs all night until stopped manually. heat, pump, water supply, arms led controls all working. Any ideas as to the fault


You have a bad control module. send me a 4 thumbs post if this was helpful to you.p.s im a old bosch tech ... Bosch 24 in. SGS09L12 Logixx Free-standing Dishwasher

I have a zanussi ZSF2440s dishwasher, runs a program ok but wont heat water or dry, heater and wiring all ok, have changed controller but fault still persists


Looks like the program detects the water is already heated. Have you checked the thermostat element?\015\012\015\012Please post a comment so that I can help you further. ... Zanussi Dishwashers

Hi my baumatic bfd62w dishwasher wont compleat its cycle and if you advance manualy the water is not heating up is this the thermostat that is at fault?


... Dishwashers

Westinghouse dishwasher virtuoso SB 925 not heating the water and not drying the dishes , still workig thou. Would it be expensive to repair?


I also had this problem of the water not heating up but the washer still did its thing. what i found was the problem, is the soldered joints on the circut board were cracked (dry joints) around the relay area, i just resoldered them and hay presto it ... Dishwashers

My Westinghouse dishwasher SB907/915/925 is not heating water.


I have had the same problem. I removed the heater element and checked the resistance with my multimeter and got the reading of 26.4Ohms which sees ok. I then removed the printed circuit board and found that a joint on the back had burnt out. I have r ... Westinghouse 24 in. MDP531 RF Free-standing Dishwasher

Westinghouse dishwasher sb915 not heating ?????


... Whirlpool 24 in. DU920QWD Built-in Dishwasher

HOTPOINT D28 DISHWASHER APPROX 5YR OLD WHEN POWER IS APPLIED TRIPS MAINS MOTOR OR HEATING ELEMENT ARE THESE COMMON FAULTS ???


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1706 seconds