Having problems with your Dishwashers ?

Clean light stays on

\015 The clean light blinks and stays on to say dishes are clean and wont run any other cycles\015

Answers :

7 Blinks on Kenmore/Whirpool is water temperature error.

Check the water faucet at the back and ensure hot water is getting through.

If the machine is getting hot water, then you usually need to replace the thermistor.

Read the extensive solution here: Blinking Clean Light on Kenmore & Whirlpool Dishwashers - FixYa


\015\012\015\012\015\012\015\012\015\012 \015\012\015\012If the cycle complete, but another cycycle does not starts then check these:

Water-heating cycle
Timer
\015\012\015\012\015\012\015\012Water-heating cycle\015\012\015\012Many dishwashers heat the wash and/or rinse water to a higher temperature, as the cycle calls for it. In these cycles, the dishwasher pauses after it has filled with water, waiting for the water to reach the pre-set temperature. What happens next, depends, as follows:

\015\012
    \015\012
  • On some units, the pause is timed and the unit continues after the allotted time.


  • \015\012
  • On others, the cycle can't continue until the water reaches the higher temperature. If you have this type of dishwasher and the water isn't being heated (say, because of a problem with the heating element or thermostat), after the unit stops at the heating cycle, it never continues. When you repair the heating-system problem, the "cycle problem" is fixed too.


\015\012\015\012\015\012\015\012Timer\015\012\015\012Timers don't often fail. But if every other part of the dishwasher seems to be working properly and the timer knob seems to be stuck in one place--doing one function continuously--the timer may be at fault. Dishwasher timers can't be repaired. If yours is defective, replace it.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have the kitchenaid dishwasher model #kudv03ctss0.the clean light stay blinking and when i hit the start it just blinks and then stops but the clean light stay blinking constantly.if i hit the cancel button i hear a um noise as if it going to turn on but nothing happens and the light stays blinking. what do you think might be the issue .


Dear friend,\015\012ngfam at you service! happy to assist!\015\012It's an electronic problem!The lights are called codes and need to be diagnoed by a factory service person!!We sell appliances for 65 years an ... Dishwashers

I have a kenmore DW model 16019. The clean Light stays on the light does not turn off. I have tried to disconnect and have taken the motort apart to make sure everything is clean. What Can I do to solve this problem? 1. Does the washer work at all? No it does not work 2. Does it display any codes or flashing lights other than the CLEAN LIGHT being lit? no other lights are on except for the green blinking light 3. Is the light solid or blinking? blinking Green light 4. Entire model # is necessary


Thanks for re-posting with all the info!!The model # is 665.16019403The cleaning light blinking is a fault code listed in the tech. service sheet, its usually a faulty heating circuit.The sheet can be found behind the ki ... Kenmore Dishwashers

My Bosch dishwasher SGS46E26GB/90 makes a knocking noise when started. the timer does not advance and the check water light comes on.There is water in the bottom (up to the bottom of the door) . If I reset the DW the water drains ok. If I mess with the buttons E3 shows on the display the 'quick' light stays on and the eco light flashes. I've checked the filter where the water hose is fastens to the rear. I've cleaned the filters at the bottom of the DW and cleaned out the pump area under them.


... Dishwashers

Kenmore 665 17033400 Elite dishwasher clean light flashes 7 times and it wont run. i used the reset combination, all lights lit and stayed lit until i pressed reset. Then it started a wash. now the wash seems to be finished, though i am not sure and the clean light is flashing 7 times, pause, 7 times, etc.


That signals an issue with a faulty heater &/or heater drive circuit.(that info comes from their troubleshooting guide)I ran into it this weekend and discovered that the heater coil in the bottom of the washer was broken. ... Kenmore 24 in. 17032 Built-in Dishwasher

I have a kitchen aid dishwasher that is stuck on the clean cycle. It will drain water, but no water seems to be getting into the washer. If i push the start button, cycle will not start. The clean light is the only light that will stay on. the other lights will go on, but they eventually go off without starting the cycle. Is this the thermal fuse???


... KitchenAid Dishwashers

I have a kenmore DW model 16019. The clean Light stays on the light does not turn off. I have tried to disconnect and have taken the motort apart to make sure everything is clean. What Can I do to solve this problem?


Please accept this answer - and re-post your question with the following information:1. Does the washer work at all?2. Does it display any codes or flashing lights other than the CLEAN LIGHT being lit?3. Is the ... Dishwashers

Good day, My Kenmore ELITE washer's CLEAN light stays on after last cycle and now won't go out. Cannot run the machine at all now that this light stays on. Any ideas?


... Kenmore Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103

Clean light stays on


7 Blinks on Kenmore/Whirpool is water temperature error.Check the water faucet at the back and ensure hot water is getting through.If the machine is getting hot water, then you usually need to replace the thermistor. ... Dishwashers

My Whirlpool Dishwasher cleaning light stays on


... Whirlpool Dishwashers

Clean light stay on


... Dishwashers

Have a brand new maytag dishwasher. When the cycle is finished the clean light stays on and I have to push buttons to clear is this normal?


If you open the door after the cycle, does it clear the display? Mine is a different maytag model, and when it's done it shows the display as clean. The display will go blank when I open the door manually... let me know if that helps.KEN ... Maytag 24 in. MDB5651A Built-in Dishwasher

The clean light on my Kitchenaid Dishwasher model KUD124SEBL4, stays on even after opening the door after w wash. Also 4 out of 5 time when you start the dishwasher no water turns on you have to cance


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Steam Clean light stays on and won't start


... Maytag MDB7749AWM Builtin Dishwasher

We have a Miele G863SCVI Plus. We have a problem with the Inlet/Drain light staying on. Originally, if we turned the dishwasher off and then on again it would work. Now it won't. I have cleaned the filter out but wonder if there is something else that needs cleaning. I have never had a manual and cannot download it from the websites that say they have it. I would really appreciate it if you can help me


Hi.Check that the drain hose is responding to specifications. This machine suffers from siphoning problems caused by incorrect drain settings. Siphoning means that the water flow back inside the machine from drain hose, causing drain ligh ... Miele 24 in. Incognito G863 SCVi Built-In Dishwasher

Bosch SHU 3322 just had the control panel replaced not long ago and now when we push the power bottom it does not work and the clean light and regular light stay on.


... Bosch Dishwashers

Hello, my slimline, Hoover, HEDS 668, AAA class, dishwasher is playing up. During a wash cycle, my meter tripped. When I put the power back on, all the light were flashing and beeping. The beeping stops after a while and all the lights stay on. It sounds like it is trying to fill up or drain or something too, but that soon stops. The filters are clean. What could be the problem? Hazel Stenson-Pickles


... Hoover Dishwashers

Maytag dishwasher. The clean light stays on solid until I press any button then it blinks for several times then goes solid again. None of the other buttons light up when pressed. I unplugged it for over an hour to try to reset it but that did not help.


... Maytag MDB9600A Jetclean II Built-in Dishwasher

I have a Kenmore Ultra wash Quiet Guard 3 dishwasher and the green flashing light that states its clean stays on and stays flashing. I can not even get it to start a wash cycle. please help. What is the button sequence that everyone is talking about that clears this? Thank you.


Hi\015\012\015\012\015\012Thanks for using FixYa. To resolve this you will have to reset the console. Do this by closing\015\012the door and press these buttons in sequence...\015\012\015 ... Kenmore 24 in. 15689 Built-in Dishwasher

My dishwasher will start any program, it drains, fills, empties & beeps continually within a few minutes. The rinse light stays on until the machine is turned off & re-set. Aditonally, the ater heating has been hit & miss for some time! A service guy cleaned the water sensor with hot water fro a ketle + tooth brush, but the problem came back after a couple of weeks. Having removed item he cleaned, it looks fine and appears to switch OK. Not sure if its actually faulty. Is the themperature sensor


... Whirlpool 24 in. ADG7540 Built-in Dishwasher

The sanitized light flashes on our Kitchen aid dishwasher - KUDP01ILWH1 after the run cycle is complete. The clean light is solid green, but the sanitized just started flashing instead of staying solid. Just started last night.


... KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher

Intake/Drain light is on. First flashed F13. Cleaned the water intake filter;cleaned the triple filter and drain pump.Light continues to stay on-it seems as if no water in coming in the dishwasher. Water supply is on all the way.


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. F13 is a\015\012flow meter error; unfortunately there is no way to reset it so you’ll have to\015\012get ... Miele Dishwashers

CLEAN LIGHT SENSOR LIGHT STAYS ON, DISHWASHER DOES NOT START


... Kenmore 24 in. 16019 Built-in Dishwasher

Just purchased bosch ascenta dishwaster. When the wash cycle is finished the clean and half load lights stay on. Is this normal? When do you know that the drying cycle is complete?


... Bosch Dishwashers

Dishwasher won't reset, stays on gree-flashing light- Clean cycle


HI,This is an indication that the water did not heat properly. I have put together some instructions on what can cause this and how to reset the control so you can use the dishwasher again. Follow the link below and let me know if this he ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Clean light stays on but the cycle does not start


Is the clean light on solid or blinking? ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1146 seconds