Having problems with your Dishwashers ?

Smeg dishwasher sa 623 x-1wont work

\015 We have just moved into a house and he dishwasher doesnt seem to work. We have turned on the power and electronically it works but there doesnt seem to be water going into machine. The water hoses are connected and there is some water that goes into the machine but after an hour the dishes are not cleaned and the powerball dishwashing detergent is still solid\015

Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Smeg dishwasher sa 623 x-1wont work


... Dishwashers

Hi, We have a Smeg ST 663 dishwasher that does work. However, sometimes when you want to use it and turn the power button on it beeps twice with the red light flashing and you can't get it to work or change the settings. Sometimes if we leave it for a while and try it again later it will work, but it is annoying as sometimes it won't want to work for ages and we really want our dishes cleaned! The dishwasher doesn't have many buttons on it (a power button, cycle selection button and 1/2 load


Hi,\015\012\015\012Turn machine on and press and hold the programme select button till the light goes out about 5-7 seconds see if this resets it if it does start a cycle and see what happens.Otherwise the pcb as its not responding to an ... Smeg Dishwashers

Smeg Dishwasher Hello I have a smeg dishwasher - built in, push button. It has stopped working - the program start and you hear it drain but that's as far as it gets, no water appears to be getting in. A couple of times the last 2 program buttons flash or the rinse light is on when we open it. let me know if you have any thoughts on this - I'd really appreciate it. thanks Diane


Replace the timer/control board ... Dishwashers

Smeg Dishwasher ST 663 sometimes won't work


My dish washer stops after i5 minutes, don't know what the problem is, water is going in but just suddenly stops, i changed the hose but still the same. Any help welcome ... Smeg 24 in. DWD1SSE-1 Built-in Dishwasher

I have a Bosh Logic dishwasher SGS65L12GB/04 The other day it got to 1 min left and would not stop pumping out water and continued even with the door open. After 5 mins playing around it started working again for a further 2 washes. Now when switched on the pump for pumping out the water works continuously. Reset it time seem to count down but does not do anything reset time goes to 0 and beeps but still the pump runs even with the door open. all buttons seem to work fine but no washing and pu


Hi Jonathan,\015\012\015\012Welcome to FixYa.\015\012\015\012Your float may have got stuck or it's possible that you have water leaking into the bottom of the washer. In the bottom of the wash compartment, next to the drain yo ... Bosch Dishwashers

Turned my Smeg dishwasher off mid-cycle, now it is not working.


... Dishwashers

My smeg dishwasher stopped working think anti floading was tripped


... Smeg 18 in. DWI410 Built-in Dishwasher

Smeg dishwasher pump works intermittently


... Dishwashers

My smeg d1612c dishwasher is stopping at the rinses cycle and not doing anything no fault code is showing. The dishwasher is heating up motor is rotating and pump is working. can anyone help


... Smeg DWD612C Built-in Dishwasher

I have a six month old Smeg, integrated dishwasher, model D1612CT which has been working fine until recently. The pots are not clean. The cups and mugs have tea "rings" around them and the glassware is covered in a "milky" film, which comes off immediately if rinsed under the tap. I stack the dishwasher as recommended in the manual. I use loose powder rather that tablets, salt and rinse aid. Can you please sdvise me?


... Smeg Dishwashers

I have a SMEG dishwasher. Can't find the model number on dishwasher or manual. Had two flashing lights and referred to manual - indicates a blocked filter. Cleaned that out, but now when I try to put it on "light" cycle (indicated by wineglass symbol), that light flashes (but no others as would indicate a problem).. All the other cycles work fine. Any ideas? Thank you!


Hi.If only the crystal light is flashing and no other light is on, then that is not an error code. Problem can be a temporary malfunction, or a defective control module or keypad.The delicate (crystal) light flashing with last ... Smeg 24 in. STX2 Built-in Dishwasher

Model IGV 659.1 Dishwasher When switched on the 'time display' takes longer than 2 minutes to display the planned wash duration. The display works fine to set a delayed start. After cycling the start delay round to 0, or after RESET (buttons A and C pressed) the unit is then 'nudged' into displaying a time. After, at last, a time is displayed the unit works fine.


... Kuppersbusch Dishwashers

A feew weeks ago Smeg STA6047 dishwasher stopped in the beginning of the programme after approx. ten minutes, and gave the error code E9. There had been clearly water in the machine, but maybe not enough and the detergent box was not open. However, when technician came by two weeks after, the dishwasher worked and he said it was in order. But only after being used only once, the same problem reappeared. First the washer gave the error code E8, on the second try E9. And now it does not start at a


As you know E9 is linked to the water inlet problem. \015\012\015\012There are two scenarios here - 1) Are you using the Aqua-Stop safety system? If this is trigerring then it can shut the inlet water. The reason it can trigger is if the ... Smeg Dishwashers

Smeg silver slimline dishwasher just stopped working no lights on the control panel and the buttons on the control panel dont work either.


... Smeg 18 in. DWI410 Built-in Dishwasher

I have a Smeg dishwasher SA660 EB. Still like new . Hardley used but have problems with the timer switch not progressing past 5 and also had the thermostat replaced as a loud bang heard and the machine did not work. Since warranty on repair run out it sounds like water is leaking around the thermostat through onto electrics as loud bang noise heard again . I found the thermostat just pushes up into the rubber seal in the bottom of the dishwasher. I have taken out the rubber seal as this also loo


... Smeg Dishwashers

Smeg df612sdx Until last week I enjoyed several years faultless service from my SMEG Stainless Steel dishwasher, with the exception of needing to replace 2 x spray arms. The unit has now stopped working altogether. Despite powering up several times, I continue to get both the start/pause and selection programs buttons constantly flash (green lights) when the unit is switched on; previously this only occurred once the wash cycle was complete. Any thoughts would be most appreciated. Thank you


... Dishwashers

Hi, my SMEG DI4510 Dishwasher doesn't work


... Dishwashers

SMEG dishwasher model ST 662 E not working on any cycles


... Dishwashers

Smeg DWI216C intergrated dishwasher not working on start up


... Smeg DWI614 Built-in Dishwasher

Help i have a smeg dishwasher, which until recently has been perfect,it seems to be stuck on its cycle and is making all the noises of working, but nothing is happening, then the panel says E 1. any ideas what is wrong and what can i do? thanks to anyone that can help


We have a Smeg SA8605W which has had a similar problem 3 times in its short 3 month life. The problem with ours is that the control panel on the front pushes against a very brittle plastic frame to activate the micro switches. Because of the brittle ... Smeg CSU2001 Built-in Dishwasher

Smeg dwf 64 sse dishwasher wont work


... Smeg 24 in. DWF612WH Free-standing Dishwasher

The original control unit from Bosch' dishwasher SHU4302UC/14 has been replaced after recall from Bosch with a new one that stop working after three washes. It does not respond to any command and shows ''0'' at display. What may be the problem?


... Bosch 24 in. SHU43 Built-in Dishwasher

Smeg DWI 710 was switched on while water supply was isolated. Dishwasher isn't working, is there a reset somewhere?


... Smeg 24 in. DWD1SSE-1 Built-in Dishwasher

Hey, I have an 18 inch free standing SMEG dishwasher that has stopped working. The power and water feeds are fine. None of the cycle buttons are lit up or responsive, however two buttons next to each other are. They are not flashing just permanantly on. Lauren


... Dishwashers

My smeg dishwasher has warning lights on and won't work I think that the water did not drain on one of the cycles


Unplug an plug it back in an see what happends as in does it work after you doo that ... Smeg 24 in. DWF614SS Stainless Steel Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1970 seconds