Having problems with your Dishwashers ?

HI THERE WE HAVE UST BOUGHT A SECOND HAND LG DISHWASHER AND IT DIDN'T COME WITH A TOP OR LID AND IT DOESN'T LOOK GOOD. WE WERE WONDERING IF WE COULD PURCHASE EITHER A SECOND HAND ONE OR NEW ON? THANKS HOPE YOU CAM HELP US. SYLVIA


Answers :

Sylvia I am just guessing but I believe this is an under counter dishwasher and if that's the case it does not have a top you will have to mount it under the counter top
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

HI THERE WE HAVE UST BOUGHT A SECOND HAND LG DISHWASHER AND IT DIDN'T COME WITH A TOP OR LID AND IT DOESN'T LOOK GOOD. WE WERE WONDERING IF WE COULD PURCHASE EITHER A SECOND HAND ONE OR NEW ON? THANKS HOPE YOU CAM HELP US. SYLVIA


Sylvia I am just guessing but I believe this is an under counter dishwasher and if that's the case it does not have a top you will have to mount it under the counter top ... Dishwashers

I just bought this dishwasher- second hand, but they could not find the owner's manual. Wondering if I could have one sent to me.


... Whirlpool DP920PF Dishwasher

I am trying to replace the GUIDE RAIL BRACKET ASM on my GE dishwasher (model no. GSM1800JWW). How do I either: (a) remove the old brackets, and then install the new ones; or (b) remove the rollers from my new brackets, so that I could slip these rollers onto the old brackets still in the dishwasher, saving the trouble of removing the old brackets in the first place? Either solution would be acceptable, but right now I can't figure out how to do either one without breaking something. Thank you v


Be ready for both . because if they break you can still replace it. but (a) is to me the better choice. let me know how you made out and send me a 4 thumbs post if it works out ... Dishwashers

Our GE dishwasher (5 yrs old, Model GLD4250L00CS) only fills with water half way when the unit is started. The inlet valve was replaced with a new one, but that did not solve the problem. When started, the dishwasher fill cycle runs for 41 seconds before the wash cycle begins. Repair workers told us we probably need a new ECU (Electronic Computer Unit). My questions are: Is 41 seconds the correct time for the fill cycle for our model? What else could be the reason for the unit not filling pr


Hello &\015\012Welcome to FixYa\015\012\015\012Check this\015\012 ... Dishwashers

The thermostat seams to have given up in my bosh dishwasher and it is taking over2 hours to do a load I was wondering if I could buy a thermostat and get some Instructions and diagrams on who to instal the new one . Must be 8 to10 years old. No one in my are fixes or can buy Bosh parts I was hoping you could help. Kind Regards Anthony Lee


Hello Anthony. Yes. For Bosch parts and parts diagrams go to this link RepairClinic.com\015\012\015\012Enter your model number and you will have access to 500 Bosch parts and more. I use this site daily and it is excellent. The part will c ... Bosch Dishwashers

I would like to purchase a Moyer Diebel U/C dishwasher for residential use. I have the option of purchasing a used dishwasher - it could be one of three models. Which one is the model he is trying to sell to me? 1. 501 HT 2. 501 HTN 3. 501 LT the owner states the voltage is 120/208-240 and heats between 150 f and 180f.He notes there is a 4 ft. cord at the back without a plug on the end of it but the model is rubbed off of the serial number tag.There are three switches on the lower right hand co


The way you mentioned the unit have a 4 ft. cord at the back seem like a 50l LT the best way to determent is open up the bottom plate and see whether there is a booster tank in the right hand side. \015\012Hope this can help you. ... Moyer Diebel 24 in. 501HT Built-in Dishwasher

I recently purchased a Dewalt DXPW 3835 Pressure Washer from Home Depot.... After 4 hours use I no longer get any pressure. After depressing the trigger, I get a second of pressure and then it just dies. I called DeWalt and they couldn't help and to take it to the Warranty Shop. They informed that they wouldn't be able to look at for 2 weeks so I took it back to HD and got a new one and this one does the same thing. I'm pretty sure it's probably a pretty quick fix but no one seems able to te


... Dewalt DXPW3835 - 3800 PSI Professional Gas-Cold Water Pressure

Our dishwasher was taking in water, circulating it but not heating it up or moving through the cycle. My husband took the control panel off and there were some scorch marks on it so we got a new one. He replaced the control panel and the dishwasher went fine for one night. It heated up and washed everything perfectly. The next day when we put it on it was back to square one plus the lights on the control panel are now not working. Just wondered if anyone has any idea what we could do or are


Yes it's time to visit the dump ... Siemens 24 in. SE64A630GB Built-In Dishwasher

The circuit board on our Miele G646 dishwasher has failed. do we 1) see if we can get another one second hand and in which case what other models have a compatible circuit board 2) try and get the board repaired and who do you recommend 3) bite the bullet and pay an exorbitant amount for a new board or 4) give up and just buy a new machine Thanks


What is the dwasher doing or not doing and how do you know it's the board. More information required please. ... Dishwashers

Have a new DeWalt dxpw 3835 that loses power after a one second initial burst. No one at HD or the warranty shop seems to be able to give me any advice on how to fix it. The machine only has 1 hour of use on it... I could drop off at warranty shop but they wont even look at for 2 weeks they're so busy. any advice???


Need model of pump probably an ar pump also has the trigger been closed for more then 4 minutes with enginre running?? ... Dewalt DXPW3835 - 3800 PSI Professional Gas-Cold Water Pressure

How does one change the colour panels on the front of the dishwasher. Need to change panels to white with new appliances. I was informed many years ago when we purchased dishwasher that panels could be reversed to new colour.


On any dishwasher, the bottom rail can be pulled off and the panel bends and pulls right off. ... KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher

We recently purchased a new pump for our frigidaire gld4355rf dishwasher. The old one started making grinding noises. When we moved the dishwasher it had leaked due to a failure of an interior seal. Our new pump is now making the same grinding noise but it is not constant. When my husband adjusted the pump by using his hand when he got into a certain position the noise stops. We keep the screens clean. Is there an issue with the pump in this model?


... Frigidaire GLD4355RF Dishwasher

I have unresponsive touch pad, blinks, but the dishwasher does not come on. do I need to replace the control board? or the touch pad? it's a new machine and we have only used about 10 times since we had it. This is the second dishwasher we have purchased. Could it be there's a power serge burning out the boards? Should DW be on a GCFI outlet?


If it's new(less than a year old) it should be under manufacturers warranty. if not under warranty b4 replacing any parts try killing the breaker for a minute or two ... GE 24 in. GLD5860LSS Stainless Still Built-in Dishwasher

Kitchenaid KUDK03IT has just had it's second control board in 90 days stop working. New one is ordered, but I wonder why it is going through control boards.


... KitchenAid KUDK03ITBK Built-in Dishwasher

I OWN A COLEMAN 1500 POWERMATE POWER WASHER. AND NEED TO PURCHASE EITHER AN EXTENSION OR A NEW HOSE AND WAND COMBO OF 50 FEET. THE REASON BEING THAT I AM HAVING DIFFICULTY WASHING THE UPPER PARTS OF MY 3 LEVEL HOME. THE HOSE ATTACHMENT IS A TWIST/TYPE AND THE WAND/HOSE IS ALL IN ONE. CAN ANYBODY GIVE ME A RESONABLE AND ECONOMICAL SOLUTION. ALSO WOULD THE ADDITIONAL HOSE HAVE ANY NEGATIVE IMPACT ON THE WASHER AND ITS CAPABILITIES? THANK YOU IN ADVANCE


Here are a couple of links to the stuff you need:\015\012\015\012link 1\015\012\015\012 ... Pressure Washers

I have a hobart LX18C. I purchased a new control board and as I found out its factory set to the h model. How do I change the board over to the c model. How do I program the machine for the different wash cycle times, I have one that is working but its on the 140s. cycle and only heats the water to 80 degrees. I see the push buttons on the control and wonder what they are for.


Here is a Hobart link that may help. https://feg.hobartcorp.com/resourcecenter/ProductDocumentation/F18615%20Rev%20I.PDF ... Hobart 24 in. LXIH-3 Built-in Dishwasher

I purchased a Whirlpool dishwasher in either July or August 2009 from Best Buy. It is not cleaning all my dishes. I have tried 3 different types of soap--the packets that came with it; powder; and liquid hoping that it would work. I have loaded light and heavy. I have tried the normal and light settings with rinse, hot water or not. They are just not getting clean. And the dispensers are not totally emptying. I already had to have a new dishwasher sent because the first one was damaged on


I fixed this problem by calling Whirlpool directly which I should have done to begin with. I wasted $20 on your person. I waited and waited while the screen said everyone was busy. And then I was cut off. When I went back to the website, your per ... Whirlpool Dishwashers

I just bought an Indesit D3000WZ dishwasher, second hand, and it does not have a user guide or installation manual and I can't find one online. I just want to know how to properly install and operate my dishwasher (i.e. what settings to use, etc.) I have never owned a dishwasher, so this is all new to me.


... Indesit Dishwashers

My Bosch diswasher is hanging up in the cycle (at 102 mins. in normal cycle and 38 mins in quick cycle). I hear what sounds like a one second pumping of water into the sink area, a pause, and then another one second pumping of water, on and on, but there's no progression beyond this point. One possible cause: a few weeks ago someone turned off the hot water at the heater and another person tried to run the dishwasher. The dishwasher did not function because it could not get hot water. Perhaps


Hi\015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. To start with check the water inlet valve which is located\015\012behind the lower access panel on the left or right side of the Di ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

Maytag mdb8600 I am replacing the latch mechanism and have 3 wiring connectors. Not sure how to connect them back to the new latch. The first one has 4 white wires, the second one has 4 black wires and the other has 2 black and one purple wire and attaches near the top of the door....I was looking for a wiring diagram but hoping you might be able to help


... Maytag 24 in. MDB8600AW Jetclean II Built-in Dishwasher

I have purchased a repalcement detergent dispenser-assembly and do not know how to take old one out and relpace with new part. The new part has a face plate that snaps on to the screw mounted base plate assembly which attaches to the door. I need to know how to remove the old dispenser and install the new dispenser without breaking parts and scratching the door. Is there a schematic or exploded repair view I can check out or even written directions?


Hello\015\012& Welcome to FixYa\015\012\015\012To replace the detergent\015\012dispenser you can check this video. The video gives you step by step\015\012instructions:\015\012\015 ... KitchenAid 24 in. KUDP02FRSS Stainless Steel Built-in Dishwasher

Dishwasher FDB4315LFC0 Error code ER uo Second time it has happened. First time, a repairman came and said I needed a new "vent assembly", but I asked if he could "un stick it," so he took it apart and fiddled with it, and it worked for about a month. Now the error code is back, and he warned that if it came back, I should have it replaced. I've only had this NEW machine 10 months -- this shouldn't happen, right? Any suggestions? Thanks.


Who's to say what should or shouldn't happen?Sounds like you need a new vent assembly. ... Frigidaire Dishwashers

My Off white maytag Quiet Series 300 is only 1.5 years old. I am replacing fridge oven and micro with black ones. Could I just change the front of my dishwasher to black - how much would that cost comparing to getting a new one?


You sure can. ApplianceArt.com has many different options including stainless and BLACK. go check them out...most it will be is around $50.00. ... Maytag 24 in. MDB9750AW Dishwasher

GLDB958AQ0 Lights on panel light up then go off after a few seconds upon startup. Sometimes they stay on and the timer in the display window counts down the minutes, but in either case no sounds come from the dishwasher nor does any water enter the unit. The water is turned on and there are no kinks in the supply line. I removed the water valve and could not blow through it. Upon applying current to the valve I could blow through it but it still seemed restricted. Should I be able to blow thr


... Frigidaire 24 in. GLDB958A Energy Star® Built-in Dishwasher

10 year old Kenmore Ultra is leaking early in the washing cycle. Wondering if this is worth fixing or need to bite the wallet and buying a new one. I am worried about affecting the new cabinets even though the dishes seemed to be clean on the two occasions that the dishwasher has leaked. Only need a somewhat simple machine- I'd appreciate any suggestions as to what brands I should research if buy is the conclusion. Thanks.


At 10 years old I wouldn't put much if any money into it. Do check the water connections as it may be something simple that just needs to be tightened or a washer replacement. Replacing the valve is a simple and inexpensive fix but don't bother going ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1231 seconds