Having problems with your Dishwashers ?

Won't drain Kenmore Model #665 Won't drain, leaves water at the bottom?


Answers :

Look for the float.

it will be in the bottom somewhere. This is how your dishwasher knows it has water in it.

your float might be cracked or full of water (then it needs to be replaced. if you just want to drain the dishwasher in the short term, you can always prop up the float (but this will prevent the dishwasher from filling up again, because it will think it is still full...)

Or sometimes it is an open bottom or air-trap type of float and it might just be filled up with grease and stuff.

Reach underneath with your finger (YUCK!) if you can, and scoop out the grease. Then it should work just fine.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Kenmore dishwasher model # 363.15222100. The water does not drain properly after the final cycle, leaving 2 inches of water at the bottom. I don't have a manual and can't find my model # on this web site. Can you help? Thanks.


... Kenmore Dishwashers

Won't drain Kenmore Model #665 Won't drain, leaves water at the bottom?


Look for the float.it will be in the bottom somewhere. This is how your dishwasher knows it has water in it.your float might be cracked or full of water (then it needs to be replaced. if you just want to drain the dishwa ... Dishwashers

Dishlex Global 310 model. My dishwasher has water sitting on the bottom of it and it wont drain. I noticed it after I did a cycle of dirty dishes and the 'fast' light was flashing when I went to open it. Which shouldnt have been because it was on a normal wash. The water has been sitting at the bottom for 2 days now and still wont drain! I've taken out all the parts on the bottom which come out and cleaned them. Still no change however.


Just ran another cycle and it was fine ... Dishwashers

I have a kenmore dishwasher model # 665 16798790 that is not draining. Washes fine but leaves dirty water in the bottom. Does not over flow.


... Kenmore Dishwashers

Shu9925uc/14 bosch dishwasher leaves standing water in the bottom of the pump. The pump seems to be bad because it wont drain out the back hose. I have run the diswasher full cycle and put the drain hose into the sink to test. It wont drain at all now and I dont hear the pump. Perhaps unrelated: Pump seemed to stop working after the back hose disconnected itself from the back of the unit spilling water all over the floor. When I reconnected the unit to the wall the pump now seems to be disfunct


Hi Dishwasher not draining issue occurs due to kinked drain pipe, clogged drain filter or drain pump. Check the drain hose for any visible clogging, remove if present. If no visible lint is present then remove then turn off the dish ... Bosch SHU9925UC Built-in Dishwasher

Whirlpool Quiet Wash Plus dishwasher Model DU920PFGZ3. Worked fine until I replaced the insinkerator and forgot to punch the drain plug leaving water standing on the bottom of the machine. I punched the drain opening, and pushed the cancel/drain cycle button. It drained fine but since no water comes from the spray arms. I have removed the arm all the way down..NOTHING!! Some research indicated it could be the water inlet valve. When the buttons are pushed, it cycles but no spray or water.


... Dishwashers

My Kenmore Elite dishwasher (model 665.17462300) is not spraying the water from the basin in the bottom up through the rest of the dishwasher. The basin fills with water, then just makes a humming noise and appears to splash a little of the water around the very bottom of the dishwasher. When we cancel the cycle, it does drain out the water from the basin. I cleaned all the gunk and debris out of the basin in the bottom, but it didn't make any difference.


... Dishwashers

Whirlpool DU915PWPTO wont drain leaving water in the bottom what does drain is slow, disposal clear,hose clear, pump runs to wash dishes,water in bottom is more than normal


... Whirlpool Dishwashers

Kenmore dishwasher My Kenmore dishwasher model 630.16302401 is not successfully completing wash cycle. When I hit "normal" and turn it on, water enters the d/w, and the sprayers (both top and bottom), spray water. Approx. 10 mins. later, the water is drained. At that point, it appears that water never again enters the d/w to complete the wash cycle. In fact, the soap in the dispenser does get released, and the door opens. However, the soap will just run down the inside of the door and pool on th


... Maytag Dishwashers

I have a Kenmore dishwasher, model 665.17019401 (serial number FS1002610). It goes through all cycles, drains out water, periodically, and dries the dishesat the end. But, when it ends, there is water at the bottom of the tub, at least 1 quart of water. I have to drain out the remaining water in the dishwasher. What is wrong?


Either the drain or screen is somewhat plugged, or a clog or jam in water pump. Many machines do leave just a little bit of water just so the sewer fumes don't come up. ... Kenmore Dishwashers

Kenmore dishwasher M# 665 s#16632000 STOCK# FL4313714 It is leaving about 2in. of water in the bottom once its done with the wash cycle. When I push the drain /cancel button and take drain hose off the sink. It has a small stream but never drains all the water out. Seems to keep the same level. Any Ideas thanks


I would remove the bottom panel of the dishwasher and remove the drain hose from the pump. On some of the Kenmore Dishwashers you can remove the drain spout where the drain hose attaches to and clean. Sometimes something will catch inside the drain s ... Dishwashers

Kenmore Dishwasher - drains most of the water, but leaves some in bottom.


Cean drain. ... Dishwashers

Water drainage I have a old kenmore model 363.14031000 serial HZ313550R. There is water on the bottom of the dishwasher that won't drain. This is our first time running it since we moved in. Is this natural? The water is below the sprayer arm or whatever you call it. If this is not natural what can I do to fix it?


\015\012 Some units hold water in the bottom so the seal in the bottom will not dry out. I suggeat you contact Sears. JOHN-LA. ... Kenmore Dishwashers

The Crosley dishwasher I have (model number cdb600kw0) does not drain all the way leaving water in the bottom of the tub...


... Crosley Dishwashers

My Neff intergrated Dishwasher model S9J1F won't drain--it may drain partly sometimes, leaving the water well at the bottom of the inside of the dishwasher full, but other times does not seem to d


... Neff Dishwashers

We have a Kenmore dishwasher, model #665-15955793, that is not draining properly. After running through the cycles there is water still left in the bottom of the dishwasher and the dishes have water spots. Is the problem with the line to the garage disposal?


... Kenmore 24 in. 16032 Built-in Dishwasher

All of a sudden, my Kenmore dishwasher (Model 363.1411691) will not cycle. When I lock it shut and try to set it to wash, all I hear is a click--no motor running, no water sounds. As I advance the timer knob, I just get clicks where each cycle should begin. There is standing water in the bottom of the dishwasher which does not drain out. Any advice would be much appreciated, for sure.


Hi.The clicks are simply the relays in the timer board that try switching on. The control module is likely working.The cycle does not start because of a different problem.If no light is coming on, then ensure that wall socket ... Dishwashers

I have a kenmore Ultra Wash Dishwasher, Model 15825691. We were recently hit by lighting. Once hit, the dishwasher started up. Since then, all cycles work, however, at the end of any cycle, the dishwasher continues to run and fill the bottom of the washer up to about two inches and then cuts off, so when we open the washer, there is approx 2 inches of water inside no matter what. I have pressed the "Cancel/Drain" button, in which drains the water after two minutes, but when that is finished, the


There must be a problem wit the fill valve. Check which valve the water enters. Check first the wiring to the valve of the water inlet or where the water comes out to fill the washer. Check for physical evidence of damage on the solenoid (or contr ... Kenmore 24 in. 16539 Built-in Dishwasher

My kenmore elite model 630 (bosch) dishwasher will not drain water. Water collects in bottom of the dishwashwer


Mine is 4 years old and doing the same thing. Would like as solution as well. ... Kenmore Dishwashers

Dishwasher I bought a 2006 Kenmore dishwasher model #66516032400 and the water does not totally drain out from the dishwasher. There is always a small amount of water left at the bottom. Has done this from day 1.


Check whether the drain line was assembled exactly as per Kenmore's instructions.\015\012Good luck! ... Kenmore 24 in. 16032 Built-in Dishwasher

The problem started with it not draining correctly and leaving water in the bottom - my husband took it apart and found a bolt in the drain. He removed it and now it won't start. It appears to not have power to the electrical panel- we have reset the breaker several times - left the breaker off for 10 minutes thinking it might erase the memory - I've asked for instructions to reset and I keep getting info that is very far removed from this model. I know it has a protocol because a repair


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012\015\012The reset on your dishwasher is as follows, ( I can't locate your particular model number...but its madw be whirlpool so there are only a couple of possible sequences ) however depending ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have a Kenmore Elite dishwasher (model 630.17303406) and it just stopped working. Doesn't drain what's left in the bottom and just makes a humming sound when turned on. Power is good, sounds like the motor is working. Doesn't seem like it is drawing water in. I want to check the pump and motor, anybody have any advice?


If nothing obvious like blocked / obstructed outlet pipe\015\012You need to check if the outlet pump motor in line with the outlet hose is spinning when in the outlet mode. First check if it is spinning by looking at it and see if the small fan ... Dishwashers

My kenmore dishwasher will not drain completely. It seems to go thru all cycles, and leaves the bottom of unit covered with water. solve this


Hi\015\012\015\012\015\012\015\012\015\012\015\012If the water doesn't drain from your dishwasher, check these:\015\012\015\012\015\012\015\012Drain line/air gap\015\012\015\012A clog in the drain line or air gap (if th ... Dishwashers

Dishwasher wont' drain ...leaves dirty brown water ing bottom of washer


Remove drain hose under sink shop vac hase pump and sewer drain clean out inside washer food chopper in bottom rear of washer ... Hotpoint Dishwashers

I have a Kenmore Dishwasher model # 587.1523. For some reason, after washing or rinsing cycles are complete, water is still in the bottom tub. My question is, besides the troubleshotting tips in my use and care guide, is there anything else i can look for or fix myself to help our dishwasher drain?


Good Evening,\015\012Have a Kenmore\\Quiet Standard Model#587.1523 900\015\012Dishes are not getting washed, cyles through , Believe the inside Top Nozzle is not getting any water up the tub to the top of the washer ?? Not sure hoo to fix ... Kenmore Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1475 seconds