Having problems with your Dishwashers ?

Connection to my faucet

\015 I bought a used Kenmore portable dishwasher Model # 8557670.....how do I connect it to my faucet.....there is a part that fits over my spigot head but it does not tighten in any way\015

Answers :

There is an adapter that you can buy at most home improvement or hardware stores. If you can't find it locally you could also try sears.com for the part.


Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kenmore Ultra wash III will no longer stay connected to faucet after filling...what part should I replace the hose or the faucet adaptor? When we turn the faucet on to start up the dishwasher it falls off...when we finally get it to stay connected with water on...it will fill but then falls off again...get it to stay on, it empties, but then after it has completed filling up again it disconnects from the faucet.


If your adapter that hooks up to the faucet has 4 little white plastic jaws inside it then it can be rebuilt. there is a kit that replaces those 4 jaws, the spring, the attaching clip and the internal seal.. usually runs around 10 buks or so. if i wa ... Kenmore Dishwashers

Faucet connection I bought my countertop danby today and ran one load and the faucet connection came apart and I can not figure out how to put it together so it is basically worthless. Springs everywhere.


You only need to put back on the steel clamp that fits over the assembly which holds down the shield, the spring, and keeps the 4 ball bearings in place. The ball bearings may be tricky though as they tend to fall out when your putting the assembly ... Danby 22 in. DDW396 Free-standing Dishwasher

I have a portable dishwasher. Where it connects to the faucet it is leaking and spraying water when i turn on the water. It doesnt seem to connect fully to the faucet


... Maytag 24" Tall Tub Portable Dishwasher - Black

I need the steps to change the hose assembly on my Whirlpool portable dishwasher. When I got it someone had cut the sink connections off so my son connected it to the water and drain with my washing machine which was in the kitchen. However, I have moved and want to use it as portable. I purchased the new hose assembly for the sink faucet, I just need instructions on how to take the dishwasher apart and connect the new hoses.....HELP PLEASE!


... Whirlpool 24 in. Portable Dishwasher Dishwasher

Connecting GE Nautilus dishwasher to my 1930 style faucet


... GE Nautilus 24" Built-in Dishwasher

Portable dishwasher won't stay connected to the kitchen faucet


It the faucet connector has a lever u push in order to latch on to the faucet, just jam something under it so it maintains upward pressure and wont come unlatched when the water starts flowing ... Maytag MDB9600A Jetclean II Built-in Dishwasher

The hose connection leaks when attached to the faucet. It was fine until tonight when I tried to hook it up. I removed and reattached it several times, but it still leaks at the connection point.


... GE 25 in. GSC3200GWW Free-standing Dishwasher

Leaky connection when i connect the hose to the water faucet water sprays everywhere. What can I do?


Replace the hose rubber washers they are inside the screw-on hose ends.\015\012get the ones with a screen in the middle any hardware store will have them ... Kenmore 17252 Free-standing Dishwasher

Connector hose we tried to adapt the dishwasher hose so that instead of hooking it up to faucet, it connects to the the undersink water pipe, using tubing and clamps and a shut off valve. we can't get it to stop leaking where the clamp is. Are there adapter kits avail to do this? This way we wouldnt have to keep taking the hose on and off from the faucet.


The water pressure is too high in the intake for your kit. use a higher grade kit or reduce the pressure . ... Danby DDW1805W Designer Series Free-Standing Dishwasher

I have a kenmore Ultra wash portable dishwasher that leaks water through the faucet connection. I tried to push the red button to loosen or clean the connection ams stop the water from dribbling out.


... Kenmore Dishwashers

The quick connect that hooks up to the faucet does not stay hooked up and leaks on our kenmore dishwasher model # 665.17822000 do i need a new hose and quick connect


... Kenmore Dishwashers

My portable whirlpool dishwasher won't connect to my faucet .. i have changed the aerator adapter on my faucet and it still won't snap over it


... Whirlpool 24 in. Portable Dishwasher Dishwasher

I have a beaumark Whisper wash 1 and I just moved. The kitchen faucet is too small to have the hose connect properly. I would like to know if there is an attachment or do I have to but a new faucet?


... Dishwashers

Connecting to faucet


Well ther is in the back you will see a round button try that or just go back to the store and have them fix it for you and when you will like to talk to me my e-mail is [email protected] ... Maytag 24 in. DWC7602 Free-standing Dishwasher

Connection to my faucet


There is an adapter that you can buy at most home improvement or hardware stores. If you can't find it locally you could also try sears.com for the part. ... Dishwashers

I need a new faucet adapter for a Kenmore Ultra Wash Portable dishwasher 665.17799990 to connect to a utility sink. Where can I locate this product?


The adapter i got with my new kenmore dishwasher does not fit with my kolher fauset. The sears serviceman said i need a longer adapter. I can't find one anywhere. ... Dishwashers

GE portable dishwasher that leaks where it connects to the faucet (unicouple?), do i need to replace the unicouple or can it be repaired?


... GE 25 in. Nautilus GSC3400J Free-standing Dishwasher

Drain hose connecter won't screw into the faucet


... Danby DDW496W Free-Standing Dishwasher

The connection from the dishwasher hose at the faucet leaks and sprays water. I tried changing the rubber seal in the hose, but that didn't help. any other suggestions?


Hello raymun30,WelcomeYou said,the connection from the dishwasher hose at the faucet leaks and sprays\015\012water. I tried changing the rubber seal in the hose, but that didn't\015\012help. any other suggestions?What is ... Dishwashers

MY PORTABLE DISHWASHER IS LEAKING BADLY WHERE THE DISHWASHER CONNECTS TO THE FAUCET


Is their a rubber o-ring where the house screws on to water main ... Maytag 24" Tall Tub Portable Dishwasher - Black

My faucet connection came off and the ball bearings that keep it attached all fell down the drain.. How (where) do i replace those? does anyone know what size i need?


Order new connector from the manufacturer, the ball bearings cannot be replaced the connector must be replaced as a unit. ... Danby DDW497W 22 in. Countertop Dishwasher

I recently purchased a Maytag portable dishwasher Model MDC4650AWW. There was no faucet adapter included with the washer. I need to know which parts I need and how to connect it. Thank you


... Dishwashers

I have a maytag portable dishwasher purchase it 14 months ago, the hose that attaches to the faucet leaks and wont stay connected, is it worth buying a new hose?


You need to replace the faucet adapter ... Maytag MDC4650AWB 24 in Builtin Dishwasher

Need adapter for portable frigidaire ultraquiet III to connect to kitchen faucet


... Frigidaire Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0334 seconds