Having problems with your Dishwashers ?

Is this hot or cold feed

\015 Is the whirlpool/ikea DWH b10 hot or cold feed\015

Answers :

This dishwasher should be connected to the hot water line under the sink. If it is connected to the cold line, you will have very poor cleaning. The hot water should be 120 degrees (F) minimum and less than 140 degrees.


Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Can I run my dishwasher just on a cold water feed even though it as hot and cold feeds


Yes but you will use a lot more electricity. ... Dishwashers

Is the feed pipe a hot or cold feed?


Connect the dishwasher to the HOT water side. Although most dishwashers have a heating element to heat the water, they are normally installed this way to reduce the amount of time the heating element is on. This not only extends the life of the hea ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Is this hot or cold feed


This dishwasher should be connected to the hot water line under the sink. If it is connected to the cold line, you will have very poor cleaning. The hot water should be 120 degrees (F) minimum and less than 140 degrees. ... Dishwashers

We have gravity water feed and is not filling up quick enough. Could i mix with hot water as well.So putting in a y to mix cold and hot together. Thanks Dave Williams


Hi dave. actually you are supposed to fill a dishwasher with hot water only.\015\012\015\012the long term fix for your gravity feed water system would be a shallow well pump.\015\012\015\012please rate my answer as a fixya ,t ... Hoover HD95M Free-standing Dishwasher

Do you need a hot and cold water feed for the KENWOOD KID60S10 Dishwasher or just cold?


No,\012Just hot...\012\012Heatman101 ... Dishwashers

I have a Candy aquavia cd623 could you tell me is it hot or cold feed cant find instructions thank you


... Candy 24 in. CD623 Free-standing Dishwasher

Is a hotpiont Aquarius DWF32 dishwasher hot or cold feed?


... Hotpoint 24 in. DWF32P Free-standing Dishwasher

Adp 8000 the dishwasher comes with one pipe water feed in is this cold or hot water


HOT ... Whirlpool 24 in. ADG7952 Built-in Dishwasher

Is it OK to attach a hot water feed rather than cold water.


All dishwashers are suppossed to be connected to hot water. Who connected yours to cold water and why? Doesn't make any sense. Definately change it over to hot water feed. ... Asko D1716 Built-in Dishwasher

Dishwasher hot or cold feed


Cold. Have a new bosch and this is a cold feed. ... Dishwashers

Have been given a beko DE2541FX slimline dishwasher with no manual .does this connect to a hot or cold water feed?


... Beko Dishwashers

Hot & Cold Water connection - can I connect just to cold?


Yes it may take a little longer to process a cycle but yes all new machines are cold feed only now. ... Beko 24 in. D3731F Free-standing Dishwasher

Hot or cold water


D/w need to be connected to the hot water or your dishes wont come clean ... Dishwashers

Are Candy dishwashers cold or hot fill please , I have been given one and it has a red hose on it , the person who gave it to me has moved and I have no contact for him! I thought dishwashers are predominately cold fill so am wondering if he had to replace the hose and only had a red one so do I connect to hot or cold pipe please


We don't have Candy brand here in the US, but all dishwashers are always connected to the hot water. ... Candy 24 in. CD950 Free-standing Dishwasher

We have been given an indesit IDL40 Dishwasher It was given with a hot (red) pipe, but I suspect it may have been the only one they had I only have a hot feed available as the washing machine is plugged into the other Can it be connected to a hot feed or do I need to get my plumbing gear out?


... Dishwashers

I have an insta hot insinkerator model 1100, witth hot and cold dispensing. the handle on the cold will not reurn to upright position after dispensing so water will not shut off. fixable or replacement?


Hi\015\012\015\012Unfortunately replacement of the part is only repair; it\015\012cannot be repaired and should be replaced. Hope this helps...please post back\015\012for further assistance.\015\012\015\012Daniel ... Dishwashers

My dishwasher DW60 does not complete the program and drain the hotwater leaving hot water in the bottom of the dishwasher however when I run a prewash cold water cycle the water does drain away and the dishwasher program works correctly do you know why it drains cold water okay but not hot water


... Dishwashers

The wash never gets hot its always cold washes. we only have it less than 6 months it initially did hot washes but now any program we put it on washes cold only.. been through the manual cant see a solution


... Electrolux 24 in. ESL4125 Dishwasher

Dishwasher I have a whirlpool dishwasher that does not appear to be getting hot water. The washer water is cold initially and only seems to get warm once the heater in the base of the machine heats it. The hot water supply line does not get hot so I presume no water is being supplied. Is the water supposed to be hot at the start. If yes could this be caused be a faulty inlet valve and if so how can I check. The dishes are dirty especially on the top rack. Thanks for your help. David


Gendos is on track with his question. I have the same dishwasher and it doesn't get enough hot water to clean the dishes and runs for hours because the heating element wasn't designed to heat water, just maintain it. The only solution we have found ... Whirlpool GU2400XTP Built-in Dishwasher

I have purchased a Bosch dishwasher SMS50E22au. The manual instructions say cold water connection only yet there is also instructions for a hot water connection . We have solar hot water, and we are unclear as to whether we can connect to solar hot water.


... Bosch SMS69L 24 in. Built-in Dishwasher

ARISTON LSI 45/50 UK ALL COLD CYCLES ARE PERFECT ON HOT CYCLES IT GOES THROUGH ALL THE STAGES BUT NEVER ENDS THE CYCLES AND ALSO I THINK THE ELEMENT TEMPERATURE IS NOT BEING SENSED TO ALLOW HOT WASHES TO CONTINUE AND FINISH I ALREADY REPAIRED THE INITIAL FAULT WHICH WAS A RED 2 PIN CONNECTOR WITH A WHITE SOCKET GOING IN TO IT BOTH WITH 2 RED WIRES ON WHICH WAS VERY BADLY BURNED / CORRODED I REPLACED THIS WITH A 15 AMP CONNECTOR BLOCK BUT NOW I HAVE THE HOT WATER CYCLE FAULT


I tried to look up your model dishwasher ( aristion lsi 24/50uk ) by whirplool / can not find in data base / also you stated that all cold cycles work/ most d/w only use hot and there is no cold cycles . so there is always time to ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

I also have a dishwasher (AEG Favorit), and it does not heat the water anymore. It worked fine for last 3 years, and all sudden, it only washes dishes with cold water. Could you please help to solve this problem? The hot water line is fine and I do have the hot water to the sink next to the dishwasher. Thank you in advance for your help.


... AEG 23 in. Favorit 44070IW Built-in Dishwasher

Can i use my candy aquaviva cd 622 dishwasher if i only have a cold water supply to connect to it - even though it has pipes to connect both hot and cold water supplies?


I strongly advice against it, because the pumps are gonna assume thier is water their and is gonna try to pump the water in, and u will burn them up if their is no water their.. how ever you could get a splitter and run water to both hoses. even thou ... Candy 24 in. CD622 Free-standing Dishwasher

My Classixx will not fill. I have made sure the cold feed is working, I have had the side panels off and cleaned the flat plastic tube thing and the feed and drain pipes. It makes the usual programme noise, but no water entering machine. Any ideas? Hoppy 8011


Have you found out the answer as I am having the same problem. Guest ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Water in the dish washer is not getting hot, any ideas? i do have hot water coming from the sink, but none out of the dishwater, just cold.


Hello, welcome to Fixya.\015\012\015\012The problem you're describing is unfortunately a common one with B/S/H/ built dishwasher's. That includes Bosch, Thermador, Siemens, and Gaggenau.\015\012\015\012Here`s the most likely reason why it has detecte ... Bosch 24 in. SHU6802UC / SHU6806UC Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0409 seconds