Having problems with your Dishwashers ?

The upper assembly rotating cleaing arm fell off, it does not appear to be broken in any way but we do not seem to be able to reattach it


Answers :

Hi there.
Look in the bottom of the tub and in the drain pipe for the plastic screw that attaches rotor arm to the top of the tub.

Good luck and thanks for using FixYa!!
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The upper assembly rotating cleaing arm fell off, it does not appear to be broken in any way but we do not seem to be able to reattach it


Hi there.Look in the bottom of the tub and in the drain pipe for the plastic screw that attaches rotor arm to the top of the tub.Good luck and thanks for using FixYa!! ... Dishwashers

I am not happy with the racks in my new Bosch dishwasher! The bottom rack is not right! The silverware basket is in the back right corner and the silverware catches on the seal on door and it is hard to get to. The tongs are two close together and point the wrong way? The upper rack's tongs are also to close together also. I don't seem to be able to get larger dishes in with these tongs in the way. Having never used the mdl 9000359119 Rev B I had no idea. Buying a Bosch ment quality to me


... Bosch Dishwashers

I recently found the upper spray arm in the bottom of the dishwasher after running it. I can't see any piece broken off of it but I also can't see any way to put it back on. I suspect some small piece broke off in a very clean break and I just can't see it. Is this fairly easy to purchase and reattach myself? I can see the holder for it screws in and out easily.


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Frigidaire FGHD2433K 24 in Builtin Dishwasher

Broken nozzle and upper spray arm


Thanks for the help. Like the other guy said the "ninga star" thing unscrews and using the plastic part inside I just pop the spray arm back on. Screw it back and it works again. ... Frigidaire GLD2445RF Built-in Dishwasher

The dishes in my dishwasher are not getting clean, particularly on the upper rack. It seems to be because the upper water arms are not spinning during the wash cycle. The bottom spin arm is working fine. I have cleaned out both upper arms as best as I could without removing them (above and attached below to the upper rack), as it does not appear that these arms are easily detachable. I am thinking maybe water is not making it up the line to the upper arms? I also have a lot of dirt in the b


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. First of all please check the\015\012Water temperature by using a thermometer inside the dishwasher to measure ... GE Dishwashers

I have a GE Profile, GSD4930X73WW, dishwasher. The upper wash arm is not spraying well at all. I checked the water line from the pump to the upper arm and it's fine. I cleared the filters and cleaned the float. I also took the inlet valve off and cleaned the screen. Although the washer works better overall, the upper arm still does not work well. Nothing appears to be in the upper arm assy to clog water from spraying out. All seems clear from the turbid sensor (next to the pump) through t


... GE Dishwashers

My LG dishwasher upper rack has stopped cleaning. The uppermost arm is seemingly getting no water at all and the arm on the underside of the upper rack is getting some water, but not enough to turn it. I have already disassembled and cleaned all the way down to the diverter assembly and it has not fixed the problem. I think this is a problem with a the (?) diverter pump or perhaps a sensor that sends water to the upper arms. I am trying to figure out how to further diagnose the problems. The


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... LG LDF6810 Built-in Dishwasher

I have a 6 year old kitchenaid, model KUDS01FLSS2, and the door seems to have a broken spring, the (very heavy) door just falls when I open it. I don't seem to be able to find a part number


Your part number comes up as a microwave however this site has the parts yo need all you have to do is call and they ship, you will most likely have to buy a latch assembly kit but you can ask the operator and if they don't have it they can tell you ... KitchenAid Dishwashers

Leaking dishwasher My GE dishwasher leaks when running a load of dishes. The leak seems to be coming from about the middle of the tub about halfway back. I can't see exactly where it's coming from, but it appears to be dripping right behind the motor. Could it be a poor connection? I would appreciate any suggestions. Thanks, Bob Engle I do not seem to be able to find the model number


Probably a leak at the motor seal where it enters the tub. Best to remove the motor if you can and inspect the seal. ... Dishwashers

DD602 model. while running upper washer appears that the seal/gasket around the whole upper is not working as water makes it out of basin and on to the middle shelf, then drips on floor. is there a way to test/double-check that the gasket is filling with air? any other ideas.? bottom basin works fine.


I had a air leak so that it would fail to keep a seal.To find out what was going in a made up a hose, which I could put in line and fitted in a pressure gauge.  It showed that the pump was pumping, but the exhaust valve had a small leak. ... Fisher and Paykel 24 in. DD-602 Built-in Dishwasher

Bosch dishwasher the string on the door tensioner has broken I have the new part but dont know how to got out the lower part. Do I have to take off the hole door or is there an easy way to change it? It seems odd that as its string and must be prone to breaking that there is not a simple way to fix it.


You have to remove the entire dishwasher from under the counter. Then locate the broken cable. There is a panel you need to remove to access it. It attaches to a spring which goes to the underside of the dishwasher. Not an easy repair. Need alot ... LG 24 in. LDF 7811 Built-in Dishwasher

Myy kitchenaid dishwasher model kudi01flss doesn't start even though the lights on the panel light up so I opened up the door to look at the latch and found a broken plastic piece that appears to be part of the latch. Could this be why the machine doesn't start. The funny this is the door still seems to snap closed even with this broken piece but what I'm thinking is that this piece activates some sort of electrical connection that turns the machine on when the door is closed. Any thoughts on th


... KitchenAid KUDC25CH Dishwasher

I have a Bosch dishwasher and the upper arm that spins and dispenses water has come off. There is a bracket on the back wall with 2 protruding pieces and an open whole in the middle which seems like the water comes out of it. There are 2 metal "clips" on the side of this braket which seems like the plate part of the spining arm should be able to attach to it.. I cannot figure out how..Any helo would be apprecated..


On Bosh dishwasher you just slide the upper arm vertically until it snaps in place. The arm attachment will snap automatically into the clips, onto upper dishrack, unless the upper arm is damaged ... Dishwashers

Bosch dishwasher Model SHU 4302 UC Bracket holding upper spray arm came off when upper rack was removed (had never happened before). Cannot figure out how to reattach bracket. No "parts" or loose pieces on the bottom so doesn't seem like anything broke. Thanks.


Hello. Here is a diagram of the upper rack\015\012http://ww ... Dishwashers

The upper rack side rail is loose where it attaches to the side wall of the dishwasher. It allows the upper rack to wobble. When the dishwasher is turned on, the force of the water pushes the rack forward so it detaches from the water supply and the arm does not rotate. The arm and connection are all clear and the arm is able to rotate, so those problems are not a factor. The wheels are in good condition. The left rail is a little loose; the right one is very loose. There must be a way t


Hello melinda.... Here is a link to searspartsdirect.com ... Bosch 24 in. SHX46A02 / SHX46A06 Built-in Dishwasher

GLD5900N00WW I have noticed that my dishes in the upper racks are not getting clean. I emptied the dishwasher and ran it without dishes. I noticed (when I opened the door mid cycle) that the bottom arm is rotating but the upper arm does not appear to be rotating. Any ideas why this is and how I might be able to fix it?


You need to remove the top wash arm and check for any blockages in the holes, clean them out and make sure the arm spins freely. ... Dishwashers

My KA Dishwasher model KUDSO2FR has the Normal and Light/China lights oscillating back and forth. None of the functions appear to work. Is there some other way to reset the dishwasher? Unplugging doesn't seem to do it?


Sounds like a bad prosser . but ck the ribbon from the touch panel /remove ribbin and clean end retry / if this does not work / replace prosser . **** hope this helper . feed back pls . ... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

Water spray has removed from top inside how to fix it back on? need a picture so we can reinstall it as does not seem to be damaged or broken, may be able to just clip back on.


... Bosch 24 in. SGS09L12 Logixx Free-standing Dishwasher

Dishes are cloudy and have soap residue. Have cleaned upper &lower spray arm often, as good as posible (find holes plugged). water level & temp. seems normal . Water intake screen appears clean


Clean the spray arm jet holes if they are blocked. Check whether you have filled the rinse-aid dispenser.Check whether arm turns freely when rotated by hand manually. ... Maytag MDB9600A Jetclean II Built-in Dishwasher

I have a Kenmore dishwasher Mod. #665 17729000. When I opened it there was a plastic tube laying on toip of the contents of the bottom basket: it looks like it could be the feed tube of water to the top basket, but I could find no way of reattaching it. I have not been able to find a detailed drawing of the machine on line. Help please.


W have herebelow the link of your model with all parts layout which we believe will helpyou see how everything is put together and also you can order any part thatmight need to be replaced. Don't thing we need to describe a ... Kenmore Dishwashers

I have a Miele 590G dishwasher. Everything appears to work except for water supply. Any suggestions about what I could do or what could be broken? I opened the supply connection (the small gray box) and checked the filter - all seems good. But still - no water supply! Thanks in advance. Ross


You must to check also the tap of water which connect water to this small box may the water pressur out from tap is weak .\015\012you can use a small pan to help this test.\015\012 thanks ross ... Miele 24 in. G656SCi Plus SS Built-in Dishwasher

Broken Glass Hi! A glass bowl shattered into 10,000 pieces inside out dishwasher. We cleaned out what we could but there is glass stuck in the bottom. It seems like a no-brainer not to run it, but I will ask, will it hurt the dishwasher to run it and let the glass drain out? Is there an easy way I can fix it or do we need to bring in an expert?


Sorry if you've already tried this (and it doesn't really answer your question)... Have you tried taking a damp paper towel to the bottom of your dishwasher - that trick picks up the really tiny glass particules - or a wet/dry vac? ... LG LDF6810ST Stainless Steel Built-in Dishwasher

Removed rear toe-plate to detect leak. Leak caused by broken drain hose. Hose replaced. To do this the unit was tipped forward onto its front door to allow access to the base area. Water allowed to drain out the front base area. Unit re-assembled but now does not switch on. Water connected. Base-plate dry. No water was detected at upper-front control panel. Power is connected and reaching unit ( multi-meter test ). Tipping the unit forward seems to be the cause. Is there any fuse,


The micro switches are frequently replaced on the door handle and they don't need to ever get wet. A lot of amp draw burns those switches up while they are dry. If they were wet and power was applied then they got fried my friend. The good news is th ... Dishwashers

Whirlpool DU900,09,10,11,15,20,30,DUL100 Hi, I'm not sure what exact model mine is, but those are the models listed on the manual. I opened the washer and the whole upper part of the wash tower was laying on the dishes! I took everything out, and began trying to think logically, and re-assemble the thing; nothing appears to be broken. page 17 of the manual is the only place that even shows this set up, but it's just a part description. As I am looking at the picture, I realize that the spray tow


... Whirlpool 24 in. DU920PW Built-In Dishwasher

The upper wash arm has detached from the rear of the washing machine and I cannot get it to go back on. It does not seem to be broken.


Hi.The arm attachment should slide vertically to snap into the duct located on the tube wall. Ensure that you are inserting the arm correctly and not upside down (common mistake). ... Bosch SHU5316UC Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1061 seconds