Having problems with your Dishwashers ?

I HAVE A MAYTAG DISWASHER AND WOULD TO ATTACH A DOOR PANEL OR SIMILAR TO THE FRONT TO MATCH KITCHEN CABINETS. CAN THIS BE DONE. MAYTAG DISWASHER dax3000axw


Answers :

Idts i think you need whole new dishwasher
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I HAVE A MAYTAG DISWASHER AND WOULD TO ATTACH A DOOR PANEL OR SIMILAR TO THE FRONT TO MATCH KITCHEN CABINETS. CAN THIS BE DONE. MAYTAG DISWASHER dax3000axw


Idts i think you need whole new dishwasher ... Dishwashers

Maytag model mdbtt70aww. After the end cycle. open the door and found detergent tab on the bottom and the main wash cover is opened. Maytag diswasher model MDBTT70AWW. Put dishes and so forth in the dishwasher. Put detergent tab and jet-dry rinse agent in the pre-wash section. and close the cover. Start wash cycle after done over door and found the detergent tab on the bottom new the heater. The cover to the main wash is opened. Dishes are are clean. Wish someone would tell me


... Dishwashers

I'm installing an electrolux dishwasher, the first thing I'm going to do is the electric wire. I know I have to attach the black white and green (ground wire).I've done this before with my Maytag and it was a breeze. When I open the elec. box on the electrolux dishwasher the black white and green wires go into the box from the Dishwasher and then THROUGH THE BOX AND THEN BACK INTO THE DISHWASHER>>>>>THERE IS NO END........... In the Maytag I just opened the box on the dishwasher and the ends of


There should be a complete wire connection already there ready to be plugged in. If not, typically at the back of the unit there should be a black plastic box that when opened will indicate 3 terminals. live - neutral - and earth. Looks to m ... Electrolux Dishwashers

I'm considering an Indesit dif04uk dishwasher, and want to fit a decor panel to match kitchen. Can this be done, what is the available size on the door, without obstructing controls, and are these controls on the front or the top edge of the machine's door. Anything else I should consider?


\015\012Have you looked at Appliance Art (http://www.applianceart.com)? they have several options that may be easier for you. I think there may be so ... Indesit Dishwashers

Maytag diswasher MDB6600AWW Sprayer arms don't spin. Dishwasher makes all the right noises, except for spraying. Water fills properly and heats up. Water drains properly. Found paper on the back of access panel. Ran Manual Function and Field Service tests, no problems indicated. Disassembled all the pieces inside the bottom of the dishwasher. No obviously damaged parts. Shaft for motor turns freely. It seems like the parts that attach from the impeller to the motor shaft don't


... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

I have an Optima series G1470 or G2470 dishwasher with a heavy panel on the front to match the kitchen cabinets. I want to tighten the door spring so I can open it more gently. House guests tend to let go of the door part way down and it bangs open the rest of the way. Also, I have not put salt in. Do I need to in Wisconsin? If so, what kind of salt do I use? Thanks, MJ


About the use of salt depending on water hardness, there is a very good explanation on page 11 ... Miele Premier-Plus Built-in Dishwasher

Hi, I have an AEG Favorit 525 dishwasher. It's over 20 years old, but has a panel on the front which matches the kitchen and it has done stirling service over the years. Lately, the knob has been sticking a bit mid cycle, but it has been intermittent. Last night, although the dishwasher sounds like it is working properly, it is not filling with water. Motor sounds like it is trying, but to no avail. If it was human, I would say prostate issues, but I don't think dishwashers have those. A


... AEG Dishwashers

My Maytag diswasher legacy 300 does not drain . Water back up & spill overt the kitchen counter top. What shall I do ?


Hello,There are several reasons why a washing machine won't drain or spin. The cause could be something as easy as a clog or something difficult that will need a licensed repairman. Start with the simplest possible cause and work down to ... Maytag Dishwashers

My Maytag MDB9150AWS is no longer working due to what I believe is a electrical fire in the front control panel as there was smoke coming out of the top of the front panel. There were no flames but the smell took your breath away. We had to open the Kitchen windows and door for several hours to try to get rid of the smell, but you can still smell it by the dishwasher. This model is not part of the recall. Has anyone else had a similar problem with this model?


My dishwasher (same make and model) had a similar problem except I did see some sparks coming out from th front on the side of it (on Thanksgiving Day no less - a lot of manual diswahing followed). What the problem ultimatly was is what I believe to ... Dishwashers

Have the same problem as other with the maytag quiet series 300 model MDBS561AWB dishwasher. Two of the buttons on the front light up, but dishwasher will not start. Don't know if CBoard or the buttons or the ribbon cable is the problem. Took the door apart and couldn't find any condensation....Looks like maytag has done it again......could use some help with the cost of replacing all those parts. Will help me decide if better to buy new dishwasher.....preferrably not a maytag or whirlpool, or a


... Dishwashers

My dishwasher (Maytag MDBH965AWQ quiet series 300 was purchased in May 2006 (making it just a little over 4 years old). The handle broke on it initially and now the control panel has gone out including the start button. The cost of the replacement parts is right around $200, so I don't think it is worth investing that kind of money into it since it seems to be a lemon anyway. I have always been faithful to Maytag. At the time of our kitchen remodel in 2006, we chose all Maytag appliances. I


Well Kathy, you may be in luck. There has been a safety recall on your model of dishwasher and Maytag will give you a considerable allowance to replace with another Maytag. You may contact them at 1-800-544-5513 with your model and serial number and ... Maytag Dishwashers

I'm having my kitchen counter tops replaced with granite. I have a GE Model GSD700 dishwasher that is now attached to the existing counter top. The granite counter tops will not accept having a dishwasher attached. I need installation instructions for the dishwasher which do not include being attached to the counter top. [email protected]


You can attach a block of wood using silicone adhesive to hold it in place on the underside of the granite top. After the silicone has cured (usually 24 hrs) you can use the same mounting clips as before. Just be sure to use shorter screws than the ... Dishwashers

How do I remove a maytag model dwu8240aax from the cabinet. With the door open I expected to see screws that secure it to the cabinet, but I don't.


They are usually secured to the counter top with two screws you can access with the door open. ... Dishwashers

Installation upon installing 24"stainless electronic dishwasher, I don't see how & or any top tabs to attach to under counter top for stadiltion. most diswashers have tabs for wood screws to attach the top of dishwasher to. please advise. theres just thick plastic w/ grooves in it..


Some people put timber off cuts on the top panel to stop the dishwasher tilting forward ... LG 24 in. LD-12BS6 Stainless Steel Free-standing Dishwasher

I ordered a stainless steel door panel (SGZ1005UC) for my Bosch dishwasher (SHV45M03UC) and the installation instructions are minimal and the diagram does not match the door. I can attach the handle, but do not know if I should remove the partical board that is in the door when it shipped. Also, there are no pieces protruding that I can see for attaching the door.


Did you ever figure this out? I just got the door and have the same questions! ... Bosch Dishwashers

The wheeels have broken off of my maytag diswasher upper rack. as far as I can tell i can not just buy the wheels i have to buy the entire rack adjuster? Do you know how i can find just wheels. I have a maytag dishwasher model #mdb7600aws


Hi,\015\012I think that this is the part that you are looking for....\015\012\015\012http://www ... Dishwashers

GE Diswasher Mod# GSD900L-01. The guide wires attached to the springs on the door have broken. Need to get new wires, and instructions how to re-attach the wires to the springs and the door. Thank you.


The door cable is here: \015\012\015\012http://www.appliancepartspros.com/part_details.aspx?part_id=2038829 \015\012 ... Maytag Dishwasher

Broken dishwasher We recently had a plumbing problem that resulted in the kitchen sink overflowing and flooding the kitchen. The cabinets to the left of the sink were full of water and the dishwasher to the right of the sink will not work. It says it is washing and using two different washing modes, but I cannot get it to start over. What can I do? It is a Kenmore Quiet Guard 2.


If there is no water in the dishwasher - i.e. it had finished a cycle, but now it is just the indicator lights that are on, then the chances are some water has got into the control system. It will probably dry out, given time. (maybe a number of days ... Dishwashers

How do i connect a kenmore ultra wash II portable dishwasher to kitchen sink, the attachement on the hose attached to the dishwasher it to big around to fit my facuet


You can get an adapter from a local hardware store. I'd come equipped with make and model number and the screw on screen retainer piece from your faucet. ... Dishwashers

Bosch wont Hello i have a Bosch DLX Series dishwasher and i put it outside and covered it while i did my kitchen remodel.. 6 months later kitchen is done and i move the washer back in. It turns on and it sounds like its running but it wont take in water from the hose. which is on and connected. any suggestions thanks very much...Steve


Faulty inlet valve or water in the bottom tray which will activate the float swich and pump out any water. See that this moves up and down freely. Turn electrics off first. ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

Maytag MDBH965AWQ I have a Maytag dishwasher model number MDBH965AWQ. A few weeks ago the clean and sanitized lights would not go off after the door had been left open for over 30 seconds. Then last week, the diswasher would shut off in mid cycle and all lights would turn off with water still in the dishwasher. Today, I noticed that I am able to open the dishwasher door while the dishwasher is running and it will continue to run like the door was never opened. Now it is starting to trip the brea


2 items in need of testing are the door switch - and the main controller board/timer unit.CLIC ... Maytag 24 in. MDBH965AW Built-in Dishwasher

WE HAVE HAD NOTHING BUT PROBLEMS WITH OUR MAYTAG DISHWASHER RIGHT FROM DAY ONE. WE WERE TOLD IT WAS ONE OF THE BEST DISHWASHERS ON THE MARKET AT THE TIME, CONSUMER'S REPORT ALSO HAD REPORTED THE SAME AND THAT SOLD US. I WILL NEVER EVER PURCHASE ANOTHER MAYTAG DISWASHER! THE DISHES, CUTLERY, CUPS AND GLASSES DO NOT COME OUT CLEAN! I HAVE TRIED EVERYTHING FROM RELOADING THE DISHWASHER "PROPERLY", TO INCREASING THE WATER TEMPERATURE TO THE HOTTEST SETTING POSSIBLE, TO CHANGING DISH WASHING SOAP


I understand. \015\012The whole environmentally-friendly initiative represents a new type of technology, and sadly, new technology is not alway fully proven before being rushed to market. \015\012I don't blame you for being upset, but bef ... Maytag Dishwashers

The quick connect attachment on the hose is leaking when connected to the machine. I would like to take off that attachment and replace it with a standard connector similar to a garden hose. How do I do this.


... Pressure Washers

LG Dishwasher I just purchase a new LG Dishwasher. The installer told me that the dishwasher can not be flush to the Kitchen cabinets because of the metal cases around the dishwasher and also it can not be aligned with the top and bottom of the cabinets because the door is too thick to give it clearance to open. I have had two other dishwashers in this spot and never had any issue. Thoughts? Thanks, Jen


I can't say for sure, but it is possible this unit is deeper than previous units. The only way to tell for sure is to measure the previous unit and compare to this one.I would be suspect there may be something simple preventing the dishwa ... LG LDF6810ST Stainless Steel Built-in Dishwasher

We have a 100% failure rate on multiple parts on two Maytag dishwasher units and no longer can get replacement parts from anyone. Any ideas of what to do? Here is the latest summary we sent to Maytag: Thank you for the help last fall. As a follow-up, we are still having very bad results with your product. You authorized replacement of the unit which was done. After one dishwashing, THE NEW UNIT SHOWED THE SAME PROBLEM (WOULD NOT TURN ON). I called in and you referred us to a senior te


Well iam sorry to here of you major problems.if the control board has been replaced several times and no luck fixing it there may be a problem with the main power supplied to the unit,as well as having a problem with the wiring harness.usually a manu ... Maytag 24 in. MDBH940AW Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0810 seconds