Having problems with your Dishwashers ?
My dishwasher had smoke in the inside. What could this be?
The drying element has possibly burnt out. This element is at the bottom of the dishwasher and will burn out if water has gotten past the ceramic protective cover of the element.. Good Luck
Repair Help & Product Troubleshooting for Dishwashers
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have an Inglis dishwasher.Serial number-FC3312512,Model number-IBU37002 or it could be IBU37062.I do not know how old the dishwasher is, as I justed moved in to my house this October,and the dishwasher came with the house.Last night I reset the options on the dishwasher,and had the cycle running on heavy duty.About 1 hour after the dishwasher was running this very bad smelling--like smoke- steaming odour was coming out of the door vent of the dishwasher.The smoke alarm went off in my house,and
My dishwasher had smoke in the inside. What could this be?
The drying element has possibly burnt out. This element is at the bottom of the dishwasher and will burn out if water has gotten past the ceramic protective cover of the element.. Good Luck\015\012\015\012Dave ... Dishwashers
I have a Bosch SHX46A05UC14 dishwasher. The dishwasher is in a new home I just purchased. I tried to run the dishwasher on a normal cycle. However, when I push POWER and NORMAL CYCLE it makes a buzzing noise...and that's it. I opened the dishwasher and on the base of the dishwasher there was a screen that could be removed. I noticed that there was still some anti-freeze fluid in there (because the house was winterized). Could there be a simple solution to this problem?
... Bosch 24 in. SHU43 Built-in Dishwasher
Dishwasher only faintly comes on. The detergent compartment opened but, there is a great deal of detergent residue on the inside of the door. Additionally, I removed the "mesh" drain grates from the base of the dishwasher and they are covered with chemical buildup. I was able to remove a good deal of chemical buildup. When the dishwasher would come on before, you could here the cycle start up, you could here the water, etc., now it is very faint, and you can barely hear any sound.
Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Asko D3531XLHDSS Stainless Steel Built-in Dishwasher
Blanco dishwasher Hi. Saw your answer on the Blanco dishwasher. We have same problem. Dishwasher makes all the pump sounds it used to, but does not start to drain at cycle start, and then no water comes in. read the manual again and think we may have been washing up - ie sinks plugged. Could this have triggered something. You mentioned something about a "micro switch" could you tell me where would this be?. We have a BFDW 650 S. Thanks, Angie
... Frigidaire 24 in. FDB126RB Built-in Dishwasher
I bought this dishwasher 5 years ago and was kept in the box until last month. I installed it, turned on the water and no water is being pumped into the unit from the water release valve in the dishwasher. I then checked all the cycles and everything works except for the pump. Then I checked to see if any power/volts was going to the pump and there is none. Could it be a wiring problem or could it be the circuit board?? please help. thanks
You will have to check all the connections visually. Since you know how to use a meter, see where the current stops. See if there is current coming from the control board to the pump. the water inlet solenoid valve should "free flow" water into the m ... GE 24 in. Profile PDW7800 Built-in Dishwasher
I have a moffat dishwasher MSD 2000 p00ww I checked the drain hose, ran water trough it had no problem, hooked it back on to the dish washer. I blew into the hose an could see the the air bubbles no problem in the dishwasher. But it still won't drain. Just wondering if you could hep me, on what to try next. Your help would be great.
Our whirpool dishwasher seems to be cleaning the dishes here and there, missing some. The top shelf of the dishwasher does not seem to be cleaning at all. Also the soap dispenser does not seem to be quite empty of soap when the cleaning cycle is done. It is running fine. Could it have something to do with the panel where all the buttons are? Could the sequence be off or something? Thank you Awaiting your reply
This sounds more like the sprayer arm isn't rotating freely.Open the dishwasher and pull the bottom tray forward (remove it if you like)Reach in and try to rotate the sprayer arm. It should move freely. If you give it a quick flic ... Whirlpool GU2400XTP Built-in Dishwasher
Miele dishwasher makes grinding noise when turned on, there is a light on front next to inlet/drain. So I poured some boiling water into the dishwasher and then left it turned on and could feel the boiling water coming out of the drain hose so I am assuming it is an inlet problem, as it will drain but will not fill or otherwise work.There are a few small cracks in the outer hose of he inlet hose just below the grey box thing, could that be enough to cause the problem? They are only small so I di
We have a GE Quite Power 2 dishwasher and it doesn't dry the dishes even if you add the jet dry. The dishwasher is about 4 years old. What could be the problem? Where could I get an owners manual for this unit so I can try to fix it?
... GE Dishwashers
Whirlpool dishwasher This dishwasher quit in the middle of a wash cycle,we had to empty it and wash by hand. I thought that maybe the breaker to the dishwasher popped but when checked it had not .I then noticed that there are no lights on the electronic key board .Even when not in use there should be one red LED that is lit. It almost seems as if there is no power to the dishwasher. Is there some type of backup safety switch or breaker on the dishwasher itself that I could reset?
Fuse on control board. ... Dishwashers
Hello! My dishwasher is a Bosch SHE-44C06UC. I'm contacting you directly as I think I would like to have the service manual for it and reading one of your answers here, I think you already offered to send it to someone else, so I was wondering if you could send it to me too. Here is what is going on with my dishwasher: my dishwasher washing performance degraded suddenly. After trying the usual dishwasher magic / finish cleaner, lemishine, etc. I took out the dishwasher. The main drain pipe
Hello &\015\012Welcome to FixYa\015\012\015\012First, try to\015\012run a cycle with 3 cups of vinegar inside, run it at its hottest temperature\015\012setting. After this is done clean the drain filter pump assembly lo ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher
I have a Fisher and Paykel drawer dishwasher and I'm wondering if there's a way to put a panel on it to make it look like and integrated dishwasher. It would need some way of the panel moving to start the dishwasher because the controls are located on the front. I plan on putting it in an Ikea Akurum that is 24" deep. The dishwasher is 22-9/10 deep, so that looks like it would leave some space for the dishwasher to sit back in the cabinet so the door panel could be flush with the cabinet. I'm no
Hmmmm...the first thing that comes to mind is to check out ApplianceArt.com. they have alot of panel options. I'm not sure if they have the integrated ones you are looking for but they have cheap options for everything else. ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher
I have a Bosch she44c dishwasher that I used just this morning. This afternoon I went to turn it on and a fuse in the panel box tripped. Is there something in the dishwasher that could go bad that quickly or is it most likely something else? Every time I reset the fuse and turned on the dishwasher, it tripped again. Leaving the dishwasher off, it doesn't trip.
Hi,\015\012\015\012In some cases, the heat element lining wears out and the element shorts out to the chasis of the dishwahser, thus tripping your fuse.\015\012\015\012In other cases, the dishwaser leaks water, and shorts out ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher
Frigidaire Dishwasher This is my second dishwasher in 18 months. Water leaks out the bottom of the dishwasher. It did it on my first one now it''s doing the same thing.Could it be the water pressure from the city water line? How could this happen to two dishwashers in a row? The leak starts immediately when the wash cycle starts.
This is a simple solution, the brass nut that connects the heating element to the base of the dishwasher is cracked and needs replaced. It takes just a few minutes to replace, just remove the nut after TURNING OFF THE POWER and take to your local par ... Dishwashers
Melted rubber gasket, black rubber residue inside dishwasher I had a problem with the latch not connecting and therefore could not turn on the dishwasher. After, two months with Sears repairmen, dishwasher still did not work. I noticed as I put my head into the dishwasher to check on a buildup of residue this black glue all over the inside. Repair man stated it was animal fat. After spending some time looking at the situation under the door and inside I determined it was the gasket. He o
That is because Sears highers nimrods. sorry for the honest answer but it is the truth. Just a tip any time you get a Sears tech in your home and the first thing they do is get on the phone with tech support it's a bad sign that they DO NOT KNOW WHAT ... KitchenAid 24 in. KUDS25SH Built-in Dishwasher
I HAVE A BOSCH SHU5305 DISHWASHER THAT WHEN IT IS TURNED ON IT WILL NOT DRAW WATER FOR THE WASH. IT JUST SITS THERE AND HUMS. HAD A BIT OF WATER FROM THE SINK BACK UP IN THE DISHWASHER AND SPILL OVER ONTO THE FLOOR YESTERDAY. I CLEANED THE DISHWASHER FILTER WHICH WAS COMPLETELY CLOGGED. I THINK THE DISHWASHER WORKED FINE PRIOR TO THIS INCIDENT BUT THIS COULD ALL BE COINCIDENCE. I DON'T KNOW IF I HAVE A PLUMMING PROBLEM OR A WASHER PROBLEM. THE SINK WATER WORKS FINE. I CHECKED THE ON/OFF WATER VA
If the solenoid valve is humming and calling for water, you probably have a plugged screen in the valve, some you can get to and clean, some you have to replace. ... Dishwashers
Foggy Glasses Glasses are very foggy after a wash cycle. There seems to be a heavy film on them. It can be scrubbed off with liquid soap and a brush. This started suddenly after I washed a baking pan in the dishwasher. The pan was very used and scratched before I loaded it in the dishwasher. After the wash, it was very rusty and there was rust on other dishes in the dishwasher. Could this have created some problem with the dishwasher, which is now affecting it's ability to wash? Thanks,
Yes i think this is the cause of your problemi suggest you run washer a couple of times empty but add soap ... GE 24 in. GSD2000Z Built-in Dishwasher
My 1 yr old GE dishwasher model # GLD4900P00WW lost power during the drying cycle & blew the rest of the circuit. An electrician has fixed the rest of the circuit & rewired the dishwasher to it's own switch in the breaker box. The dishwasher still has no power. Is there a fuse somewhere in the dishwasher that could've blown? If so, how do I locate it?
... GE Dishwashers
I have a Miele G 892 SCU PLUS Dishwasher. I have clean the filters, check the pump and could turn the impeller both ways. I turn on the dishwasher and it will pump out any water and fill then heat the
... Miele Dishwashers
I just bought a whirlpool model DU1014XTXQ dishwasher from Lowes. I got half unpacked from the box before I noticed their was no sound insulating blanket. To help me decide weather to return it before I install it, I have 2 questions; How quiet is this dishwasher without a blanket? (subjective...I know. Also can I install the blanket from the old dishwasher over this new model without adverse consequences? I tried to get these answers from Whirlpool but all they could tell me was that it doe
Hello. I have been installing dishwashers for 35 years. Whenever the new one lacks a blanket I take the blanket off of the old unit and apply it being careful to trim it if necessary. I always use a good quality duct tape to make sure the blanket ... Whirlpool Dishwashers
Have the same problem as other with the maytag quiet series 300 model MDBS561AWB dishwasher. Two of the buttons on the front light up, but dishwasher will not start. Don't know if CBoard or the buttons or the ribbon cable is the problem. Took the door apart and couldn't find any condensation....Looks like maytag has done it again......could use some help with the cost of replacing all those parts. Will help me decide if better to buy new dishwasher.....preferrably not a maytag or whirlpool, or a
I just bought a whirlpool model DU1014XTXQ dishwasher from Lowes. I got half unpacked from the box before I noticed their was no sound insulating blanket. To help me decide weather to return it before I install it I have 2 questions; how quiet is this dishwasher without a blanket? (subjective...i know. Also can I install the blanket from the old dishwasher over this new model without adverse consequences? I tried to get these answers from Whirlpool but all they could tell me was that it doesn't
Water from my disposal backs up into my hotpoint ($300-model) dishwasher. The dishwasher works fine otherwise. Is there a one way valve in the diswasher that is suppose to prevent reverse flow and/or is there other dishwasher motor problems which could cause this. Actually the Hotpoint Model number is HDA3600N00BB but this website did not recognize that model number so I put in the closest model number closest to mine.
If it's what I think, it's a simple fix. Does your dishwasher drain run along the floor of the cabinet, then up to the disposal? (my guess is yes). There should be an "air gap" between the disposal and dishwasher, this means when it comes out of th ... Hotpoint 24 in. HDA3400G Built-in Dishwasher
Hello, We have a combination oven and dishwasher. Last week I filled up the dishwasher and after about 5 minutes a blue spark came out at the bottom and it cut the electricity off. Once the electricity was restored we started it again and after a few minutes it just stopped after filling up with water. It blew a fuse again but only one fuse this time and now doesn't switch on anymore. We have emptied all the water from the dishwasher and checked the filter, etc and wonder what could have gone wr
Hi, I contacted the Rosieres web site in France and sent a message using the link Contact Us. Here is the reply;Dear xxxxx,we advice you to contact:TELE MENAGER VIDEO SERVICE21 rue georges Doublet0610 ... Dishwashers