Having problems with your Dishwashers ?

I have a Jacuzzi Cara II, won't run.

\015 I have a Jacuzzi Cara II. I beleive it model # is 4960000. serial #283274. I don't have an owners manual or any info on how it should operate. It won't operate at all. I filled the tub to about 4'' above the discharge ports and have checked the connections, all seems to be in order. The voltage coming in reads about 120V. Were do I go from here? Thanks, Sig P.\015

Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Jacuzzi Cara II, won't run.


... Dishwashers

Wont run I have power to the unit but it wont run i have no lights on the unit


If your dishwasher doesn't work at all, check these:Power from the house ... KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher

My maid aid z50 dishwasher wont fill up and run i have tested fill valve its ok if i fill by hand and its up to temp it still wont run ?


... Dishwashers

I have a Honda 5.5 hp pressure washer and it wont keep running I bought it off craigs list they said the last time it ran was almost a year ago I took off the carb and sprayed carb cleaner threwout but didn make a difference I cant seem to see any jets juist the float needle and that was clean if I pour gas in the carb it will run for a for about 5 seconds and but wont stay even if I choike it. does anyone have a answer


Try soaking the carb for 15 minutes in gasoline. If you have a plugged port just sparying may not be enough to clean it ... Honda 2500 PSI Gas Pressure Washer

I have a Whirlpool GU2275XTVY0 when I start the cycle on normal it will run for about 5 minutes then the power button starts flashing and wont run. It drains fine and starts fine just wont finish the cycle.


It might help if the wash arm had started moving when it shut off.\015\012\015\012Unless it is always exactly 5 minutes I would say perhaps the door switch is out of alignment. It might start ok when you engaged at time of closing door bu ... Whirlpool Gold GU2275XTV Builtin Dishwasher

Wont run I have a Kenmore QuietGaurd2 it will not run at all. It filled up with hot water, then it quit working. It wont even drain the water out or cycle. Nothing is happening, whats wrong with my dishwasher??


... Kenmore 24 in. 15992 Built-in Dishwasher

My Bosh dishwasher now runs well past the 105 minutes as stated in the manual, over three hours before I intervene. It gets stuck on the wash mode, it wont drain or rinse, just runs and runs in the wash mode (I know it's in the wash mode because when I open it up, theres suds inside). It will do the wash mode until I reset the wash mode to "Rinse & Hold". I appreciate whatever information you could provide.


Hello, welcome to Fixya.\015\012\015\012The problem you're describing is unfortunately a common one with B/S/H/ built dishwasher's. That includes Bosch, Thermador, Siemens, and Gaggenau. ... Bosch 24 in. SHX33A02 / SHX33A06 Free-standing Dishwasher

Hi. Got a dishwasher from IKEA - Whirlpool DWH B00. It wont run anymore, 2 years old. It just wont start up, it starts to give a beep, and the solution is to press the <|> button for 2 sec, then restart it. But it still wont start. I've cleaned all filters, checked for water on board underneath, and given it some salt - no luck. Any ideas?


... Whirlpool Dishwashers

My lawn mower with a Briggs motor Wont start, has spark fuel is good , the unit is approx 5 years old, but seldom used, worked great last year, drained the fuel, and stored it for the winter.Refueled it and wont start. I can getting started if I pour a little gas down the carb, but naturally it wont run long. I'm thinking needle and seat, any help would be appreciated. Thanks


... Craftsman 2700 PSI Briggs Stratton Powered Pressure Washer

Not running at all. replaced control panel and still wont run, but panel lights up with only - - - show up. checked door switch and current is running through it.


Is the model number the 15173 Kenmore? The stainless steel version? Please let me know and I will keep checking here on the solution. ... Kenmore 24 in. 15173 Stainless Steel Built-in Dishwasher

Stored for a year. i changed the spark plug and the fuel. i also cleaned the carb. water runs through the pump. but it wont stay running. it wants to start but only runs for a few seconds. i think it might be a fuel flow problem but im not sure.


Sounds like the float my be partially stuck closed. It allows enough fuel to run a few seconds then the engine uses it faster than the float lets the fuel back in. I would remove the float bowl and flip the float up and down a few times to make sure ... Honda Pressure Washer PSI 3000

My Bosch SHX46A06UC just runs and runs and wont stop.


The control board is not turning on the water heater due to bad control board, heater or limiting fuse. ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

When i turn my dishwasher on it runs it wont change cycles and wont wash stays in the same cycle


Hello,This sounds like a bad timer.It could also be a defective thermostat. This problem will become apparent with the water heat option selected. Check by running the dishwasher with this option de-selected and see if it proceeds normall ... GE Nautilus 24" Built-in Dishwasher

Honda motor wont stay running ,carb not getting enough gas to stay running


As it is gravity fed you would need to remove thfuel line from the carby to check that the fuel is geting to that point,if not removanf clean fuel .bowl and filter . if ok. then a carby service is in order ,they are not difficult but you do need comp ... Pressure Washers

Bosch Dishwasher SHV4313GB/17 Wont switch off ! The machine keeps running even when you open the door The pump is trying to drain water away (even though there is no water left in machine ) Have tried to reset it as instructed but to no avail. It has beeped like it has finished cycle but the pump wont switch off HELP PLEASE !


Introduction: This may work for your problem, but only if you're finding that you cannot get further water to flow into your machine. If your machine fills OK, then this ISN'T a solution to your problem. If your machine doesn't fill but your drain m ... Dishwashers

The display keeps cycling thru some gibberish and wont run right. when i hitstart, it runs for the dislpayed 5 mins and counts down correctly, reaching "00" and then goes back to flashing gibberish. It will not let me chose a cycle on the inside either, as in "heavy", "fast"... please help


Not sure if you have fixed this problem yet. If it is happening only in one drawer then get a clean damp cloth and clean the key pad inside the top right of the door. Also clean the edges as well.\015\012\015\012If the other drawer is OK ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Wont let me set program just beeps when pressing program so wont run ( indesit dishwasher


Hi. Are you still having this problem? I just experienced exactly the same thing with my D61 for the second time and eventually I just got cross and held down the P button for a couple of seconds and the machine beeped 3 times and the green light wen ... Indesit 24 in. D61 Free-standing Dishwasher

When I press the on button the cycle light is on at the 50 degree setting and I cant change the setting and it wont run on that cycle. It has happened several times but this time it wont come around


Looks like micro controller problem. Contact authorized service center. ... Dishwashers

Electrolux dishwasher all lights blinking and wont turn on push start button either all lights flash or normal light stays on  either case the dishwasher wont run a cycle


Remove the toe kick by loosening 2 screws. There is a panel there with little lights that correspond to specific problems. The light that is on will correspond to the problem that the dishwasher has detected. Correct the problem and you should be goo ... Electrolux 24 in. EDW5500DSS Stainless Steel Built-in Dishwasher

Hello i have a Honda GX160 and the engine will only run on choke if i close it the engine just splutters and thats it. it wont run at the norm i have replaced the carb the tank the air filter and the spark plug and know luck i have no more ideas as to what the problem really is thanks jord


Ii know you must have replaced the fuel filter. Did you replace the fuel line? It is obvious it is not betting enough fuel or it is out of time. Have you tried adjusting the jets on the carb? Have you checked the timing? There is a crankshaft key-way ... Honda Pressure Washer PSI 3000

Hobart LX30 Hey I just bought a Hobart Lx30 and we don't have a power source that can handle the 50 amp requirement. We got it at an extremely good price so we are trying to work around it. I was told that disconnecting the water heater would allow it to work in a standard 120 volt outlet. I did that and now I have another issue. The machine wont run unless the water is 160 degrees. How do i disconnect the sensor that restricts the temp so that I can run the machine at a lower temp?


Hopefully you took the suggestion to run the correct 50 amp 208-240 service to the unit.Converting the unit to an LX30C has a couple of pitfalls. The LX30C is connected directly to the incoming water supply, which should run 120-140 degre ... Hobart 24 in. LXIH-3 Built-in Dishwasher

Bosch wont Hello i have a Bosch DLX Series dishwasher and i put it outside and covered it while i did my kitchen remodel.. 6 months later kitchen is done and i move the washer back in. It turns on and it sounds like its running but it wont take in water from the hose. which is on and connected. any suggestions thanks very much...Steve


Faulty inlet valve or water in the bottom tray which will activate the float swich and pump out any water. See that this moves up and down freely. Turn electrics off first. ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

I have a union power pressure washer it runs for 10 minutes and then cuts off and wont work again, it still needs the choke on when the engine is warm and only runs for a few seconds


"it still needs the choke on when the engine is warm and only runs for a few seconds"This sounds like a fuel problem such as the carb needs cleaning ... Pressure Washers

We just got a maytag 200 quiet series dishwasher and it wont dispense the soap the water and everything runs but it wont dispense the soap


The dispenser's unit should be replaced.You can try as well to operate the dishwasher while putting the powder detergent or the tablet on the dishwasher's bottom and if you will get good results, to opereate the machine this way. ... Dishwashers

Wife put washing up liquid into the machine and let it run it was full of bubbles and now it wont heat the water think the element is gone but the timer wont move past the heating stage if i replace the element will that sort the problem or will i have to get a timer as well?


If you put manual detergent that hapend, it could burnd electronis card (or mechanical timer-programer blowup), thermostat or the presostat, the heating element must be OK. ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0880 seconds