Having problems with your Dishwashers ?

We need to connect it back to the built in wires in the dishwasher. We need to know what colours or wires connect to the flat gold metal plates, there is a black plastic case that slips on and then 3 plates underneath and on the top, but not quite sure if that is correct. Then there is still wires that are loose that need connecting. Part NO. C00059727 Copreci - Merloni 1 160010266 TD02 0008


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We need to connect it back to the built in wires in the dishwasher. We need to know what colours or wires connect to the flat gold metal plates, there is a black plastic case that slips on and then 3 plates underneath and on the top, but not quite sure if that is correct. Then there is still wires that are loose that need connecting. Part NO. C00059727 Copreci - Merloni 1 160010266 TD02 0008


... Dishwashers

WHAT ARE THE THERMAL FUSE SPECIFICATIONS FOR KENMORE ELITE MODEL 66513122K701SERIAL NUMBER FY1211868 AND WHAT IS THE PART NUMBER FOR A THERMAL FUSE KIT? WE HAVE HAD TWO FUSES BLOW AND THERE DAMAGE TO THE WIRING ON THE LEFT HAND SIDE OF THE CONTROL PANEL THAT CONNECTS O THE SWITCH. THEIR IS DISCOLORATION ON THE PARTS AND WIRING. WE HAVE SEEN EXPERTS STATE THAT IN ORDER TO CORRECT OUR ISSUE WITH THE FUSE BURNING OUT WE NEED A THERMAL FUSE KIT AND WE NEED THE SWITCH AND THE WIRING THAT CONNECTS TO


Http://appliancejunk.com/ge/dishwasher/31-9137.pdf\015\012\015\012A ... Dishwashers

NEED SCHEMATIC iRECEIVED A REWORK KIT FROM MAYTAG TO RAPLACE THE WIRE HARNESS. MODEL MDB4000AWX. I FALLOWED INSTRUCTION TO REMOVE THE OLD HARNESS. tHE PROBLEM IS THET THE REPAIR INSTRUCTION DO NOT INCLUDE A WIRING DIAGRAM I AM NOT SURE WHERE SOME OF THE CONNECTION ARE TO BE MADE WITH OUT CONNECTING TO THE WRONG ELECTRICAL COMPONENT. I NEED A SCHEMATIC HOW CAN I GET ONE ?


Hi there,Here is the wiring diagram for that unit.Wiring diagram 1 ... Jenn-Air Dishwashers

The dishwasher was recently removed for floor refinishing and reinstalled. The bottom rotor works but the top rotor does not. I asked the re-installer, who worked for the moving company, if he had connected everything properly and he said there was just one water line going into the machine and assured me he had connected it properly. Is there something else that needs to be done to make the top rotor operational? Thanks. John M


... Jenn-Air JDB3610 Built-in Dishwasher

Due to the my Indesit IDL 530 dishwasher not draining properly, I turned it onto it's left side, removed the base plate and pump and checked for blockages in the pump and associated hoses, which were all clear. However in re-assembling it I have forgotten which way round to connect the twin wire plug to the base plate. I cannot find a relevant wiring diagram online and therefore cannot tell which is the correct way around. I then guessed and re-assembled it anyway, and as you might have g


Hi.There is more than one wire going from control board to the tub. If the connector can be plugged either way without forcing it, then usually does not make any difference the way you plug this determined connector. It will be usef ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Maytag mdb8600 I am replacing the latch mechanism and have 3 wiring connectors. Not sure how to connect them back to the new latch. The first one has 4 white wires, the second one has 4 black wires and the other has 2 black and one purple wire and attaches near the top of the door....I was looking for a wiring diagram but hoping you might be able to help


... Maytag 24 in. MDB8600AW Jetclean II Built-in Dishwasher

Dd603 no power to top drawer. circuit board in top drawer ckecks ok bottom board and top drawer wiring harnes were burnt. replaced both pieces. Still no power to top drawer. Need some help. Thanks


... Fisher and Paykel Dishwashers

Need the wiring diagram for the front panel/door of the dishwasher. The wiring diagram in the owners manual does not provide adequate description of which wires connect where. My problem is that, in taking off the door, two wires became disconnected and I cannot tell where they should be reconnected. I called Viking and they are unwilling to provide this (they prefer I call an authorized repair person). Does anyone know whether a repair manual exists for this and where I might get ahold of one.


This is all I could find go to this address www.specsserver.com/CACHE/FILE5412.PDF at the very end is wiring diagram but its not in detail ... Viking DFUD042 Built-in Dishwasher

It appears that the Inlet Valve is leaking on my Kenmore dishwasher. By replacing the inlet valve do I also need to undo the connection at the bottom with the teflon tape - or can I just undo the screws at the bottom of the plate and leave that connection alone? The dishwasher is 4 years old, could something be causing the valve leaking other than the valve being bad? Thanks! :))


Probably just hard water causing the solenoid to stay slightly open. \015\012Shut off water \015\012Remove 1/4 hose\015\012Remove wire harness/plug\015\012Remove other side hose should be a clamp.\015\012Unscrew mounting bracket and replace in the sa ... Dishwashers

My power button cover broke on the dishwasher and I figured out the part number I needed, but when I put it back together I got the wires crossed on the board and door switch. Now the control lights up , but the dishwasher will not run a cycle. THe question is does the plug on the door switch have to be a certain way, because there are three wires and you can connect the plug both ways. I did turn the plug, but it still does not run. Did I break the switch? Bosch SHU9956uc/14


The wires do have to be a certain way on the door. Otherwise a door open can tell the board that's it shut and vice versa. The easiest way to do it, is test the switch with an ohmmeter, place the meter on the switch, push button in and see if the rea ... Bosch SHU9956 Built-in Dishwasher

I have an electric karcher pressure washer. Motor not working and I need to check the wiring inside. What tool do I need to remove the screws holding the top and botton cases. Screw drivers wont work.


... Pressure Washers

My dishwasher did not come with power cord. what kind of cord do it need and how do i connect the cord? On the new cord how will i know which one to connect to the white and black wire? The dishwasher is Whirlpool model du930pwsb, Sku numbmer 451-5344.


120 Volt 16 gauge, 3 wire power cord.\015\012\015\012Brass Screw is Black, White Screw is is Common, Green is Ground....Try Home Deport for a cord. If no screws are on the dishwasher, use wire nuts and elec. tape ... Whirlpool 24 in. DU930PWP Built-in Dishwasher

Latch wires I am trying to install a new latch and can not seem to get the diswasher to operate. I need to know the connections for the latch. I did not tag them when I took the old latch out (duh). I am thinking I blew out the control panel but not sure. I haven't been able to find a schematic for the wiring.


Wireing schematic is behind the kick plate ... Maytag 24 in. MDBH950AW Built-in Dishwasher

I have a new switch for electrolux dishwasher numbered 1 to 6 and need to know which wires connect to it I have 2 black (bulb) single brown, single blue, double blue single black which wires goto which number on the switch ?


... Electrolux 23 in. ESI602 Free-standing Dishwasher

I have a 5 year old GE Dishwasher Model Number PDW9880JSS which needs to be replaced. What type of electrical connection does this unit have? Is it a standard USA plug type or does this unit require hard wiring? Reason I ask: I want to replace with a dishwasher using the same electrical connection type.


Hi\015\012\015\012Electrical connection is on right side of dishwasher. This dishwasher should have a 3-prong grounding type receptacle in the rear wall of sink cabinet next to the dishwasher. The receptacle should be installed at least 6 ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

Hi There, I have a Zanussi dishwasher ZDT 6252 that doesn't clean my dishes properly. Cups/glasses on the top tray get residue left on them if the dishwasher is anyway full or potatoes are on the plates (even after rinsing plates). Can you please recommend what i need to do? I have ran a dishwasher cleaner through on hot cycle. Many thanks in advance. Patricia


... Zanussi 23 in. ZDT6252 Built-in Dishwasher

There are cut wires and no cord for the second hand dishwasher i purchased and I need to find out what wires I am connecting and where


There should be a small junction box under the dishwasher behind the front toe panel. There should be three wires:\015\012\015\012BLACK - HOT (120VAC)\015\012WHITE - NEUTRAL (0 VAC)\015\012GREEN - GROUND\015\012\0 ... Maytag 24 in. MDB5601AWS Stainless Steel Built-in Dishwasher

My dishawasher is acting like it's getting no power turn it on and nothing happens it worked fine last time i used it this time filled it turned it on and got nothing took front pannel off all wires are fine good connection not burned lose or anything took bottom kick plate off all wires are fine not chewed burnt or loose


Try to reset the system by the breaker.the breaker may be tripped it should be a ground fault breaker ... Dishwashers

Electrical diagram I need the instalation diagram for Miele Electronic De luxe G560, or how to converte from 380 volts to 220 volts, wich terminals to jump and were to connect the wires.


... Miele 24 in. Touchtronic Platinum Built-in Dishwasher

I got this dishwasher from a friend that had mice chew the hoses and i was told that it worked perfect before the mice chewed it. I replaced the drain and fill hoses plus the power cord. when i put everything back together and power on I get F1 on the top drawer and the rotor rotates and the heater plate turns on. The botton drawer does nothing with no display. I checked all the wires with a meter and found good continuity thru every pin. I replaced the main filter board. I even switched the


Did the F1 error in the top drawer disappear after you replaced the mains filter board? ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Need a daigram for a glasswasher halcyon z42 by maidaid. would like to know where to connect detergent pump wiring


... Dishwashers

I have a Fagor/Edesa dishwasher 6 years old and need new plate racks for top and bottom. Model no is VES-032S but if this model is no longer made the sizes of the racks are; Upper rack depth 470mm by width 520mm; lower rack depth 505 x width 517mm. Look forward to hearing from you. my e mail is [email protected]


... Dishwashers

LG6810 Dishwasher HI, We bought LG6810. We need the top brackets and toe kick plate in stainless. Where can we get these? Thanks, Cookie Meigs


Here is one source:\015\012\015\012http://lge.andrewselectronics.com/lookup.aspx\015\012\015\012I have provided the LG part numbers for the parts ... LG LDF6810 Built-in Dishwasher

LG LDF6810ST had OE error. Disassembled found no obstructions blew air through and vacuumed hoses to air gap and to disposer, no obstructions. Never heard pump run when starting cycle, so replaced drain pump. Still doesn't run. Looked at the service manual, and the only other suggestion is repair circuit? Is this the circuit on the bottom right of unit or the pcb up top? Wires and connections all look fine. What else could it be. Any suggestions appreciated!


Hi,Usually my First Response to this Common Error is :-Most likely pump trap is clogged up. Access it behind small door at front. Drain water out through small hose that is there otherwise water will be all over the floor when ... LG LDF6810ST Stainless Steel Built-in Dishwasher

The top spinner on my dishwasher is not working but the bottom one is. I think the line is either clogged somewhere along the line or there is a bad connection somewhere so it isn't getting the pressure it needs. How can I find the problem?


... KitchenAid 24 in. KUDP02SRSS Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0649 seconds