Having problems with your Dishwashers ?

The rotating arm at the bottom of my LG intello dishwasher keeps falling off. It is the stainless bit that sits ontop of the rotating bit at the bottom of the machine. A bit like a boomerang shape and is seperate from the arm at the bottom. I am not sure if it just needs a washer put on it. I did try this but it just falls off all the time. It has 4 little grips on the bottom but just wont stay on the arm? Has something come off or worn away for it not to stay on. It just swivels round an


Answers :

Hi,
\015\012If it is the type with push -fit prongs, these can wear to the point that they do come off completely.
\015\012If you can identify which part is worn, you only need order that as a replacement.
\015\012You should be able to replace this yourself without a service tech.
\015\012If you cannot find a replacement online - try LG directly.
I've solved the problem 3 times with succes. It keeps coming back after 2 years, but it is very cheap to solve it.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The rotating arm at the bottom of my LG intello dishwasher keeps falling off. It is the stainless bit that sits ontop of the rotating bit at the bottom of the machine. A bit like a boomerang shape and is seperate from the arm at the bottom. I am not sure if it just needs a washer put on it. I did try this but it just falls off all the time. It has 4 little grips on the bottom but just wont stay on the arm? Has something come off or worn away for it not to stay on. It just swivels round an


Hi,\015\012If it is the type with push -fit prongs, these can wear to the point that they do come off completely.\015\012If you can identify which part is worn, you only need order that as a replacement.\015\012You should be able to ... Dishwashers

The dishwasher has three arms in it. The top and bottom arm do not rotate. The middle arm rotates fine. The arms will move when manually munipulated but do not spill while the dishwasher is on. There was a loud grinding the first time the dishwasher was used and it seemed to work fine but after about two months of use the arms will not rotate.


Sounds like maybe some rinsing salt was spilled when the salt reservoir was filled the first time (or broken glass, this always used to be an issue in catering) and got pumped through, lodging in the gap between the arm and it's mounting. this can ro ... Maytag Dishwasher

Whirlpool Gold Dishwasher - GU2700XTSB The top rack of the dishwasher is not cleaning. The bottom rack dishes clean fine. There are no clogs in either the bottom or top spinner arms, the plastic tube feeding water from the bottom pump to the top rack spinner arm is clean, the spinner arms all rotate freely and do not bind. Water pressure is correct and water temperature is correct. There are no lime or hardwater deposits or clogs. What could be the issue?


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

Bottom rotating arm doesnt spray water but top arm does


The water is at the botome the pump stop pumping ... Siemens 24 in. SE25T250 Free-Standing Dishwasher

The top and bottom spray arms were not rotating. We assumed there was a fault with the pump. We replaced the pump. The bottom arm now spins and sprays water but the top arm will spray water but does not spin.


Hi\015\012\015\012Please check if something is blocked near the top spray arm, also make sure that all holes are oopen. Use a sharp metal pin to clean the holes on the top spray arm. Make sure the water pressure is not low. \015\012 ... Dishwashers

Newer kitchenaid bottom spray arm makes horrible noise, sounds like the water has drained. When I twirl the bottom arm, it wobbles instead of rotating smmothly.


... Dishwashers

The bottom spray arm does not turn at all. Dishes are disgusting and all the food stays on it. We cleaned it out, but bottom spray arm never turns (we put cover clip in so we can watch it and also, it's always in same position).


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Maytag 24 in. MDB9750AW Dishwasher

GLD5900N00WW I have noticed that my dishes in the upper racks are not getting clean. I emptied the dishwasher and ran it without dishes. I noticed (when I opened the door mid cycle) that the bottom arm is rotating but the upper arm does not appear to be rotating. Any ideas why this is and how I might be able to fix it?


You need to remove the top wash arm and check for any blockages in the holes, clean them out and make sure the arm spins freely. ... Dishwashers

Recently our GU1100XTLQ1 started having a problem. It barely cleans the bottom rack, and barely gets top rack wet. The soap stays stuck in the dispenser. I can't see inside as it runs, but my guess is that not enough water is being shot out of the various spinning arms. From looking at diagrams it would appear that this dishwasher uses a pump to circulate water from the bottom of the cavity through the spinning arms. Is my problem a dying pump?


... Whirlpool GU1100XTLB / GU1100XTLQ / GU1100XTLT Built-in Dishwasher

Do4esnt clean My Bosch SHX33a05 dishwasher has a problem. It fills and drains well but nothing gets clean. It appears as if the arms are not rotating but the inside is wet when I look inside. I have put a bit on catsup on the inside door and even that is on at the end of the cycle. I have opend and clodes the door multiple times during the cycle and bot arms appear to not be rotating. Nothing is blocking them. I have clean the microfilter, the drain screen and open up the impeller to make sure t


... Integra SHX33 Dishwasher

I have a Bosch SHX98M dishwasher and the top arm will not rotate. I can see water coming out of the holes when open during a cycle and I have made sure there are no obstruction for the arm or anything stuck in the arm feed line. I just had a technician here who was at a loss and did not think the pump was bad since alot of water is being pushed around inside. The bottom arm works fine.


... Dishwashers

My Kitchen Aid KUDS01FLSS2 dishwasher does not spray water thru the wash arms nor do they seem to turn. Additionally, one of the the bottom arms hits the "cap, internal rear feed" where it clips to "feed tube assembly" when rotated by hand. The spray arm assembly appears true on visual examination. The unit fills, cycles and pumps out in an apparent normal way. While on this site a while back I was advised to clean the unit and referred to a downloadable repair manual that was, in fact, not


Hi.The fact that "one of the the bottom arms hits the "cap, internal rear feed" where it clips to "feed tube assembly" would suggest a tubing problem. However there are more faults that will result in no spray. Testing in this case can be ... KitchenAid Dishwashers

I have a Frigidaire dishwasher, FDB-1100RHC, that is not cleaning dishes. My fiance cleaned the trap at the bottom of the washer, removing both the small basket and the larger mesh grid. After replacing both, the washer doesn't seem to have enough water pressure to spin the lower and/or upper arms. If I interrupt a cycle and open the door, water is dribbling out of the upper arms, but they are not rotating and do not move from whatever position you place them in. Both arms are completely uno


Hello :)don't feel bad, I run into this kind of problem at least once a week.\015\012It does sound like the pressure isn't there so you're not getting water to the upper spray arm. What you need to do is take the pump apart, which i ... Frigidaire Dishwashers

Bottom Spray Arm Not Rotating


Check to make sure you are getting enough water entering the dishwasher. If you add a liter of water, does the water arm turn then? If so, you may have a faulty water valve that is not allowing enough water to enter to turn the spray arm. Hope that s ... Kenmore 24 in. 15689 Built-in Dishwasher

Bottom spray arm not rotating


The arm usually will stop rotateing because there is a obstuction in the arm itself you will need to remove the arm normally unclips (older machine used to scew off)When you have the arm out check all hole top and bottom and open any that are blocked ... Kenmore 24 in. 15689 Built-in Dishwasher

Recently there's been a white coating on dishes. Has to be scrubbed off manually or soaked in a vinegar/water solution. I flushed out the rotating arms to be sure water flows thru & it does. Checked bottom filter & basket...both clean. Twice used "finish" cleaner for dishwashers in the scrub cycle as directed. Turned off during drying cycle and now there is water across the bottom of the dishwasher. Next? Thanks for any help. Rosemary


Use any brand of dishwasher cleaner from a local store and run your dishwasher with it.I would also recommend that a calcium lime and scale remover be ran through your dishwasher to clean it out.\012this may have to be done a couple of times. ... Kenmore Dishwashers

I have a Bosch SHU9955UC/14 dishwasher. I am having problems with the top rack not cleaning. The dishes on the bottom rack are cleaning just fine. I have taken the rotating spray arm off and cleaned it out and replaced it. I have also taken all of the filters out of the bottom of the unit and cleaned them. Any other suggestions for fixing this problem?


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Bosch SHU9955UC Built-in Dishwasher

I have a De Dietrich DV640JE1 built in 45cm Dishwasher, working fine for over 3 years. After replacing the connection under the sink to fix a leak it has stopped working. But I dont think this is related. I run a cycle and it fills water in the bottom of the machine, it drains it out in the end but the 2 arms are not rotating and no water comes out. I checked the arms and they are not blocked. A faint clunking sound can be heard at some part of the cycle. I did also run a cycle with the dr


Hello Benny,\015\012\015\012It's highly unlikely that replacing the connection under the sink is related to this problem.\015\012\015\012From the symptoms you describe, it's almost certain that the circulation pump motor has f ... Dishwashers

The upper spray arm does not turn. There is plenty of water volume as I have cleaned out all orifices and pipes with an air compressor and garden hose. Plenty of flow. Bottom arm rotates and sprays like a fire hose.


... Asko D3731XLHDSS Built-in Dishwasher

Rotating arm in the bottom not attached. when i start the dishwasher, i get standing water, the arm is floating, and it shuts off.


... KitchenAid KUDD01SSSS Compact Dishwasher

I own a Kenmore UltraWash dishwasher Model # 66513833K601. I have noticed in the past couple of weeks that my dishes are not getting as cleaned as before. I checked the bottom spray arm and found that it wobbles while rotating. It doesn't rotate smoothly when I try to spin it on my own. Could this be my problem? Thank you for your help.


... Kenmore Dishwashers

Top arm is not getting enough water to rotate. The bottom arm is working good. Could this be caused by hard water deposits in the tube leading up to the top water funnel?


Yes it could but more likely the jets in the upper arm are clogged ... also often on older machines the pump wears to the point of not providing enough force for both arms .. even more likely there is usually a plastic screen surrounding the pump in ... Dishwashers

Hello, Hope you call help. I have a kenmore 13793K. Middle spray arm (attached to the bottom of the upper tray) is not rotating. It is, however, spraying water. Any ideas on what is preventing the rotation?


... Kenmore 13793 Stainless Steel Dishwasher

Water pumps into the bottom of the dw but the spray arm doesn't rotate and spray. It also empties, so the problem seems to be with the spray arm. Any solutions?


Hi,When my wife started complaining about her dishwasher not getting the top rack clean this is what I found and I wrote a tip about it...Dishwasher ... Asko 1385 Dishwasher

Whirlpool Model GU1500XTKQ0..top washer arm not rotating..bottom arm fine...draining fine..


... Whirlpool Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0984 seconds