Having problems with your Dishwashers ?

We have an older knemore Mod 11?713400s/washer and

\015 We have an older knemore Mod 11?713400 d/washer and want to turn the front panel from white to black. How do we do that\015

Answers :

Clean the old paint surface with TSP cleaner, then sand the surface lightly with ~400 grit wet or dry sandpaper (wet--dip in bucket of warm water often while sanding and sand carefully in any corners). Cut a 1/4-paper-length strip from a full sheet and fold twice into a 1/3-width square. Sand using just your fingers to hold the paper--no sanding block. Wash with clean hot water, and dry with a clean cloth (no paper towels). Mask off the area you don't want painted, then using an epoxy-type paint spray can, spray the area evenly and lightly for the first coat. Follow can directions for the second coat. Remove the masking tape and paper shortly after the second coat--peel the paper and tape AWAY from the new paint at all points and don't let any of it get stuck in the new paint before it drys. If the second coat was applied fully wet overall without running, it should turn out very well. Good luck!
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We have an older knemore Mod 11?713400s/washer and

Clean the old paint surface with TSP cleaner, then sand the surface lightly with ~400 grit wet or dry sandpaper (wet--dip in bucket of warm water often while sanding and sand carefully in any corners). Cut a 1/4-paper-length strip from a full sheet a ... Dishwashers

I have mod#GLD4355RF53 ser.#TH83039469 When you turn it on it turns off.I found out that it is vent system and this mod# has a manufacture flaw because they have vented to the back.

My sollution is to buy something else but buy the extended warranty. Keep reading to find out why. \012\012I have the same model. Only 2 years old and either the control panel or module is out. $150 or $130 depending on part and I install. Then ... Frigidaire Dishwashers

Portable maytag dishwater leak...older model

This link should help you out.check for the column "dishwasher water leak".click herewill wait for your ... Dishwashers

Spare parts INDESIT Moda Mod 2114NI

... Indesit Dishwashers

Crunching Noise (older Kenmore Dishwasher (2002 or 2003))

... Kenmore Dishwashers

Kenmore dishwasher mod# 665.16362300 spinner falls off.

... Kenmore 24 in. 15252 / 15254 / 15259 Built-in Dishwasher

GE Profile Dishwasher not cleaning - older PDW7880GOOSS

My GE Profile Dishwasher PDW8280N00SS wouldn't clean the dishes. I found what looked like plastic particles along with food particles in the wash arm spray holes. I found that heat had warped the gray flat filter in the bottom allowing food particles ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

Older Kitchenaid Dishwasher doesn't fully drain and smells

Hi Jay. Remove the lower front panel and you will see the drain hose. On the machine end of the drain hose is a small drain pump. Disconnect the hose and the pump and you will most likely find a partial blockage in the form of a piece of glass or ... Dishwashers

We have Whirlepool dish washer ref no MOD AGB 651/DP

... Whirlpool Dishwashers

Need instruction manual for whirlpool dish washer mod. DU930PWQ2

Are you sure about the model number? The Whirlpool dishwashers that start DU930 have 4 letters in the model number after the 930. If your model is the DU930PWPQ2, the manual is available here: ... Whirlpool Dishwashers

I have a mod. 3631444595, ser. dm303075, this

... Kenmore 24 in. 16059 Built-in Dishwasher

Older maytag jetclean dishwasher, calcium build up

... Dishwashers

Blanco dishwasher(Mod: bidw 405) no water coming in and not drain

... Dishwashers

Older Portable Dishwasher

I bet this is it...go by model # inside door om Right side........\015\012\015\012http:// ... Dishwashers

Older portable dishwasher

Is it filling all the way? add a pitcher or two of hot water to it in the wash cycle. if it cleans the dishes better that your problem. Now you can just delime it and be all set. ... GE 25 in. Nautilus GSC3400J Free-standing Dishwasher

Diswasher I have a Frigidaire dishwasher, MODEL FDB641JSO........are stainless steel panels available for that older model?

Not at this time there not. The panel would have to be custom made. That would be very costly. ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

Dishwasher LG mod, LD - 2031SH out of guaranty already

... Dishwashers

Kenmore dishwasher (older model)

It could be a firm clog in the exit hose but you should be able to hear the pump running during the last portion of the wash & rinse cycles.\015\012If you don't, then the pump has likely failed. ... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

Dishwasher how do i fix a broken roller. the rollers are fixed to the wall of the dishwasher. how do i get the wheel hub off the wall. the machine is a kenmore elite dishwasher mod# 665-16469300 ser# fp4803075

... Kenmore 24 in. 16462 / 16464 / 16469 Built-in Dishwasher

Maytag Dishwasher I would like to know the proper water level after DW fills. Older Whirlpool units a quick guide was when water just covered heater. I have a new D/W and the water supply is difficult to access, there is a kink in the water line slowing the water flow. The D/W fills to bottom of heater, but because the unit is so quiet I can't determine if it is timing out or working properly. I intend to repair water line when counter work is done. Thanks for any help Gary

Newer Maytags should fill close or up to the heater not over. Sounds like your alright for now but I would get that water line fixed. ... Maytag 24 in. MDB8951AWS Stainless Steel Built-in Dishwasher

I have an older Bosch dishwasher I just hooked up in my condo. WHen a cycle is done there is no water is located at the bottom of the inside of the dishwasher, yet 2 days later water will drip on the floor (with the dishwasher door closed) and I'll open the dishwasher door and therewill be 2" of water at the bottom. The flexible water discharge hole located in the sink base is located at the top of the base cabinet, and the hose runs completly 100% downward from that hole to the garbage disposa

When you empty you sink, some of the water is going down the drain hose of the dishwasher. take the drain hose up as far as possible in a swan neck ... Dishwashers

Whirlpool Gold Mod GU2500XTPQ1

Sound like a low water level and or pressure issue. Start machine on normal cycle after filling open door and ck water level. should be up toJUST below heater assy.. assumiong htats good set hte wash arms to a set positon so you can watch for rotati ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

I would like to find out the electrical and water usage of an older Vulcan Autosan dishwasher. Model #3D2OT

... Dishwashers

Need a manual for Mod DU1055xTPQ4 Please help. Thanks.

Visit the Whirlpool customer support site. Here's the direct link. http://shared.wh ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0224 seconds