Having problems with your Dishwashers ?

Cannot get this to start - Dishwashers


Answers :

Check to see if it is plugged into a GFC type outlet. if so, push the reset button on the outlet to reset it
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I cannot get my dishwasher to cancel the old cycle and start a new one. I opened the door when the last cycle was drying, and let the dishes air dry. I tried to press the START button until CL appeared, but the timer will not progress beyond 0.01 and I cannot start a new cycle. Help!


... Bosch SHE6AP05UC 24 in Builtin Dishwasher

Our Bosch SGS 53E02 AU/30 Dishwasher has the Tap Light on all the time while the Dishwasher is filling up. It appears as though water cannot get through and takes a long time to fill. It also does not allow the wash cycle to start and the powder door does not open. Can you also get any Service manuals for this model?


... Bosch Dishwashers

I am babysitting at my daughters house and I have the loc light on and I cannot get rid of it. I am trying to start the dishwasher and cannot get it to go.


Look at the control panel there is a button that has a picture of a lock or a child by it, that is your child lock button, hold button down until lock light goes off ... Frigidaire FPHD2491K Builtin Dishwasher

Further to my open question for my Asko N516 D5131 SS dishwasher I have been able to successfully press the wash setting cycle, which was before frozen on 'rinse and hold' . I then press the on/off. Button the time shows but as soon as I press it to start the dishwasher the screen changes to three horizontal curly lines and nothing further happens... It won't start. Please , I do hope somebody can give me advise. I cannot get to the power plug as it appears pot be located behind the unit whi


... Dishwashers

My kitchen aid dishwasher (8573025) "normal", "light china", "and "cancel" buttons are blinking. I can't get them to stop blinking and cannot get the dishwasher to start .


... KitchenAid Dishwashers

When starting my Bauknecht GSFP 5586 dishwasher the program is set for rinsing and the start light flashes two blinks, then again two blink etc. I cannot get the program to change. When I hold the Start button for 2 seconds, the progress light flashes at END for a moment then reverts back to the double blink sequence. I have checked the filter and it is well seated and clean. What can I do to start the program selection again?


Ok, so I had the exact same problem with the exact same model. NOT 7 blinks and to buttons that you do not have.\012I will tell you what I did as I do not know what (if any) of what I did fixed it (it could be luck but I do not think so).\012 ... Dishwashers

Kenmore dishwasher 16934 will not start up for me. I can push any button to set the cycle(pots & pans, china gentle, quick rinse, normal wash) and the time shows up in the display, but when I push the start, two red horizontal lines appear in the time remaining display. Cannot get the machine to start anything. All cycle buttons give me some kind of time remaining display but as I said, it ends up with 2 red lines. Thanks in advance. Mark


... Kenmore 24 in. 16934 Built-in Dishwasher

I have an aeg favorit4001ovi dishwasher and the beeping alarm keeps going off not long after cycle starts it doesn't even get to the point where the tab gets used. this happens alot have had engineer out and suggested that the sprinkler jets are blocked. have checked and checked these, nothing in them. cannot get it to complete a wash at moment . only just over a year old!


... AEG Dishwashers

My frigidaire dishwahser was set to run a normal wash cycle and heat dry. It never ran, the soap is still in the holder and the lock beneath the heat dry option is lit. I'm unable to cancel or select any other options. I cannot get the dishwasher to run. Do you have a solution? I have tried holding down a number of the buttons in different combonations but still can't get the light to go out or start a wash cycle.


Looks like a number of things are happening.\015\012\015\012It would be easier if you can provide the model no. of your frigidaire dishwasher.\015\012\015\012I am assuming you have turned the mains power off and on. ... Frigidaire Dishwashers

I have an old (not sure what year, 80s?) Kitchen Aid energy saver V Custom by Hobart dishwasher. We opened the dishwasher in the middle of a cycle and now cannot get it to re-start. When we lock it back up and push our normal buttons (Low Energy and Energy Saver/Dry Heat Off) or any other combination of buttons, the dial does not turn automatically and the cycle does not continue. I have also tried advancing the dial manually and still, nothing happens. I have even tried advancing it all the


... KitchenAid Dishwashers

Broken dishwasher We recently had a plumbing problem that resulted in the kitchen sink overflowing and flooding the kitchen. The cabinets to the left of the sink were full of water and the dishwasher to the right of the sink will not work. It says it is washing and using two different washing modes, but I cannot get it to start over. What can I do? It is a Kenmore Quiet Guard 2.


If there is no water in the dishwasher - i.e. it had finished a cycle, but now it is just the indicator lights that are on, then the chances are some water has got into the control system. It will probably dry out, given time. (maybe a number of days ... Dishwashers

I have a Kenmore Ultra Wash 15632/34/37/39. The Pots & Pans button is blinking constantly and I cannot Start the dishwasher. I tried pushing Hi-Temp, then Air Dry, then again. The sequence didn't work for me. If I press the sequence, then the Pots & Pans light blinks along with the Quick Rinse and Cancel buttons. Which combination do I use to get the dishwasher working again, please? Thank you.


Try to Press and hold AIR DRY for 4 seconds, to reset the dishwasher ... Kenmore 24 in. 15689 Built-in Dishwasher

Cannot get Maytag Jetclean Dishwasher-Quiet Plus will not start at all. Push the buttons and get nothing. The circuit breaker is not tripped. Is there a reset button or something like that.


... Maytag Dishwashers

My kudpo1ilbt6 kitchenaid dishwasher clean light flashes 7 times, then pauses, then repeats. Cannot break out of this mode and get dishwasher to start. Reset circuit breaker also. Is this a diagnostic code? How to put controller into diagnotic mode?


... KitchenAid Dishwashers

My dishwasher has no connection. The entire "board" is without lights. I cannot start the machine. My biggest problem is getting support from local service! I have not talked to anyone who will help! The service depart. does not return my phone calls! Dishwasher was purchased two years ago this month, Model number:MDBH945AWW


... Maytag Dishwashers

Model 66516039402 Type 575-0 Green light flashes intermittanly on Clean Problem is I cannot get the dishwasher to start. When pressing Start it flashes red a few times and then stops


... Kenmore Dishwashers

My kitchen aid dishwasher will not start I replaced the interface control board thinking that was the obvious problem. When you go to set the dishwasher to start some of the settings don't always light up then when you push the start button the lights will flash then start but it's not flashing and won't start. I get lucky once in a while and get it to flash then start. I don't know where else to look. I don't want to start replacing parts one at a time till I get lucky. My model # is KUDIO1F


Check all cables especially the ribbon cables from the user interface to the electronic control assembly as steam from dishwashings will create small amounts of corrosion and inhibit signals to and from these 2 components,unplug each,inspect,and reco ... KitchenAid Dishwashers

No Power Hi. My dishwasher wont start. I loaded it and cannot get any lights to light up on it. There is no power to it at all it seems. I tried flipping the breaker but there is still nothing. The door locks, so that shouldnt be the issue. Is there a way to reset the machine? What should I do?


I have the exact same problem with my Kenmore Type 575-0. It was working one daym it went into dry storage for a year and then when I took it out of storage it would not work. Ive already tested the thermal fuse and there is nothing wrong with that. ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Hi! My Bosch began by tripping the breaker during the cycle (several times if I could get it to reset) and now will not start at all. Even when the dishwasher is off I cannot reset the breaker unless I kind of move the machine around a bit. Sometimes it pops the breaker just closing the door...


HelloWelcome to Fixya.Based on your post,"...Even when the dishwasher is off I cannot reset the breaker unless I kind of move the machine ... Bosch SHU9915UC Dishwasher

I have a Beko DE3861F dishwasher which won't stop pumping. I cannot get it to start a new wash cycle.


... Beko Dishwashers

Both Heavy Duty and Normal wash buttons are blinking non-stop at once. Cannot get them to clear or stop. Dishwasher will not start because of this.


... KitchenAid KUDA03CT Built-in Dishwasher

I cannot get the dishwasher to start. It is the digital one and the staart button does not work. I called Jenn aire and they said to turn off circuit breaker so system could reboot. Some of the other lights come on, but not all of them


If turning off the power to reset the central control board doesn't work u will need to replace the board, the control board and the buttons and indicator lights are all one piece, to replace this part u must remove all the screws that h ... Jenn-Air Dishwashers

Quite guard 3 dishwaher lock on is on, I cannot get the lock off to start the dishwasher. Please help!!


Check your book . If you don't have it try this site http://www.manualsonline.com ... Kenmore Dishwashers

Cannot get this to start - Dishwashers


Check to see if it is plugged into a GFC type outlet. if so, push the reset button on the outlet to reset it ... Dishwashers

I just started a light wash cycle on my Kenmore Ultrawash model 665.1359. The cycle stopped suddenly and now the heated dry button is flashing. I tried pressing it for 10 seconds, but it won't stop. I cannot get the dishwasher to resume its cycle. What do I do??


... Kenmore Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2014 seconds