Having problems with your Dishwashers ?

BOSCH DISHWASHER,MODEL# SHV99A13UC19, I HAVE NO PROBLEM REMOVING THE EXISTING DISPENSER, HOWEVER INSTALLING THE NEW MUST REQUIRE A TOOL TO PULL IN THE NEW DISPENSER COMPRESSING THE GASKET SO THE CLIPS HOLD INTO PLASE. I NEED ANOTHER 1/16 OF AN INCH FOR THE LATCH ON THE CLIPS.


Answers :

Put the new one in a cup of hot water for two minutes to soften up the gasket then quickly install it while it is still flexible.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

BOSCH DISHWASHER,MODEL# SHV99A13UC19, I HAVE NO PROBLEM REMOVING THE EXISTING DISPENSER, HOWEVER INSTALLING THE NEW MUST REQUIRE A TOOL TO PULL IN THE NEW DISPENSER COMPRESSING THE GASKET SO THE CLIPS HOLD INTO PLASE. I NEED ANOTHER 1/16 OF AN INCH FOR THE LATCH ON THE CLIPS.


Put the new one in a cup of hot water for two minutes to soften up the gasket then quickly install it while it is still flexible. ... Dishwashers

Whirlpool ADG993 Hi -Had several issues with the door similar to those posted, coming away at the hinge, not sitting flush so wont close. New issue - the latch has given way, it sounds like it works but the catch is not holding, the door then falls to the floor. Any suggestions for making the latch hold the door closed? - thanks..


Dear friend,\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012ngfam at you service!\015\012\015\012If its new your warranty is for 12 months!If the dishwasher is 10 years or older its not worth inve ... Dishwashers

We have a Whirlpool mod# DU1055XTVD0 dishwasher .. the blue latch designed to keep the lid to the detergent dispenser closed after filling has come loose from the inside door panel and now will not stay in place to keep the detergent lid shut. We did find a small o-ring in the bottom of the tub that apparently is part of what helps maybe hold this latch in place, but obviously there must be something else that fits inside the hole the latch goes in that keeps it secure. This


... Whirlpool Dishwashers

I have a 4 year old Maytag MDBH945AWW and the panel lights come on and I can select cycles... but the dishwasher wont start. I tried holding the start cancel button, tried turning the breaker off for a couple of hours, took the inner panel off the door and checked the latch, but its still wont start. Any other suggestions? If it needs a new control panel its probably better to just get a new similar dishwasher for $300, correct?


What you need to do is read for continuity and power across the door latch switch. (2 white wires) AND 2 Black wires Both wires must read continuty at the control panel connectors to the power source terminals for the unit to start. Since the co ... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher

Maytag Dishwasher Model No. MDB8601AWS Plastic 4-inch door handle latch is broken. I need a new one replacement. Could you provide me a part number for the latch? Thank you, Philip Monsees


Source for 144 different parts for your dishwasher:\015\012 ... Maytag MDB8601AWS Built-in Dishwasher

Whirlpool du1055xtpq4 detergent dispenser door latch pulled out


... Dishwashers

How to change the motor on kudd01dsss0 - KitchenAid KUDD01DSSS Architect Series Double Drawer Dishwasher, Less than 24 in, 5 Cycle Selections with 3 Cycle Options, Sani Rinse Option, Whisper Quiet Ultima Sound Insulation System, Sure-Hold Light Item Clips, Rinse-Aid Dispenser, Electronic Controls with


... KitchenAid KUDD01DSSS Architect Series Double Drawer Dishwasher, Less than 24 in, 5 Cycle Selections with 3 Cycle Options, Sani Rinse Option, Whisper Quiet Ultima Sound Insulation System, Sure-Hold Light Item Clips, Rinse-Aid Dispenser, Electronic Control

Soap dispenser latch that holds the soap in is broken


... KitchenAid 24 in. KUDG25SH Built-in Dishwasher

LSoap dispensing hold down clip came out and will not go back in.


... KitchenAid KUDS40CVSS Builtin Dishwasher

How do fix a replacement lower door seal on an Ariston LSV66 dish washer, the replacement part is not the same as the original and I'm unable to workout how the new clips securely hold the seal in place


... Dishwashers

KUDSo1Ijbs1 dishwasher stopped cleaning. Counter continued to 0. Tech came to house said I needed new motor, which I did replace and still won't clean. Soap dispenses, but does not dislove. Last t


... KitchenAid Kitchen Aid Diswasher Part 4171958 Timer

Bosch SMS4012 - E-NRSmS4012AU/11 FD7309041276not sure of its age but this dishwasher wont commence its cycle when I turn the left dial (but If I hold the handle latch up, it starts) there is no error code facility on this unit. Would it be worthwhile getting a technician to fix it or should i just buy a new one !! Thank you - Rena.


... Bosch Dishwashers

Kude48fxbl - brand new out-of-the-box. When put through a test cycle after installing it, water poured out of the bottom left edge of the door. This was not associated with either the water input or the discharge hose, but rather seemed to come from the interior of the washer and out under the door. The door seemed well latched, and running it with some dishes in the bottom tray (not blocking the soap dispenser) didn't help.


... KitchenAid Dishwashers

I have purchased a repalcement detergent dispenser-assembly and do not know how to take old one out and relpace with new part. The new part has a face plate that snaps on to the screw mounted base plate assembly which attaches to the door. I need to know how to remove the old dispenser and install the new dispenser without breaking parts and scratching the door. Is there a schematic or exploded repair view I can check out or even written directions?


Hello\015\012& Welcome to FixYa\015\012\015\012To replace the detergent\015\012dispenser you can check this video. The video gives you step by step\015\012instructions:\015\012\015 ... KitchenAid 24 in. KUDP02FRSS Stainless Steel Built-in Dishwasher

I have an Equator Mini Maid PLS602S dishwasher. It works fine, but the upper spray arm fell off and the clip and knob holding it in place are missing. Equator said they no longer make this model and don't have the parts. Can you tell me where to get the clip and knob to hold the upper spray arm in place. I know there is a little white clip - I actually had it but lost it, because when I tried to hold the arm in place with that, the next time I ran the dishwasher the arm fell off again. I


There are no parts sources that i can find for this dishwasher, but my suggestion to u is this, locate an appliance repair shop in the local area that has dishwasher parts, bring the portable unit down to the shop and see if they can mat ... Equator Dishwashers

How do I replace broken latch with new one?


Make sure you turn the power off.. use a flat head screwdriver to place under the terminals and twist the screw driver to pry them up.. you shouldnd be able to break the plastic clips however if you do its not a big concern since there are metal term ... Frigidaire 24 in. FDB635RF Built-in Dishwasher

Need new detergent cup dispenser for Model KUDI220T4. The detergent cup dispenser (Part number AP3042989) has been discontinued. Need to find the replacement part and directions on how to remove existing detergent cup dispenser and install new detergent cup dispenser.


... Kitchen and Much More Dishwashers

I have been interacting with Daniel about my Dishwasher Smart Dispenser problem. The last thing he had to say to me was that I needed to replace my drain pump. Before doing this, I would like an explanation of why a new drain pump will solve my problem since my dishwasher is draining just fine...it is my Smart DIspenser that is clogged up and not working ?? See the discussion here: Dear go4t9ers, There is a new Comment for the I would like to run the Smart Dispenser Purge Solution on


Ok first this is the schematic for your entire machine http://www.s ... Dishwashers

The soap dispenser on our Kenmore Elite dishwasher (SEARS part number 8558128) will not stay closed. The little latch mechanism appears to be working, but the spring on the lid's base keeps the lid wide open at all times. I have examined the pop-up dispenser lid to see if some sort of plastic tip held by the latch after soap is added is broken off- this may be the case but I cannot see any damage where such a lip may have broken off. Does the latch catch the lid by snapping onto a plastic lip? I


Yes its probably the little latch that holds the door closed thats worn out. ... Kenmore 15762 Dishwasher

Asko 1805 dishwasher. Soap dispenser latch is constantly powered and therefore, can not latch the soap dispenser door. Replaced the soap dispenser but have the same problem. Suggestions?


... Asko 24 in. 1805 Built-in Dishwasher

Maytag MDB8859AWS, cover latch that's a part of the detergent dispenser came entirely out of the hole that the long spindle on the end of the cover latch fits into it. Does this mean the part's broken? Now the detergent dispenser won't open automatically. I can TRY and close the cover after I put the cover latch's long spindle back in the hole, but something doesn't seem right. Only three months old!


... Maytag MDB8859AWS Stainless Steel Dishwasher

Broken detergent dispenser latch Asea (Asko)1402 dishwasher


... Dishwashers

DETERGENT DISPENSER I'M NEW TO THE WORLD OF DISHWASHERS AND JUST MOVED INTO NEW HOUSE WITH EXISTING DISHWASHER, OLDER TYPE BOSCH (MODEL UNKNOWN). DETERGENT DISPENSER WILL NOT OPEN DURING CYCLES, HOW CAN i FIX THIS PLEASE? ALSO DO PLATES ON BOTTOM DRAWER FACE INTOWARD THE MIDDLE OF WAHSER OR AWAY TOWARDS THE WALLS? WOW, I DO SOUND DUMB!


Hi \015\012the plates and bowels should face into the center of the dishwasher, the spray arm spins at the top and bottom from and sprays outward, check that you are using the soap dispenser and not the rince agent cups, also check to make sure it wi ... Bosch 24 in. SHU43 Built-in Dishwasher

I have a hotpoint HDA2000G00WW built in dishwasher. The dishwasher does not run unless you press the plastic door under the latch area. I have adjusted the latch and that does not resolve the problem. I notice that the top three screws that hold the plastic eschucion are no longer holding as the plastic screw areas have broken on the eschucion. Do I need to replace the eschucion or can it be tightened some other way?


... Hotpoint 24 in. HDA2000Z Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0603 seconds