Having problems with your Dishwashers ?

Soap container stopped opening - Dishwashers


Answers :

Hi, I solved my problem with a free download by the manufacturers, of the users manual, thanks.
Cheers,
Liz
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Have the Kenmore Limited Edition dishwasher, model # 665.15892100. When dishwasher is running, you can hear the soap container flip open. However, @ end of washer's completion, and main door is opened, the soap is still in the container. Some has leaked out, but the majority is still in the container. Dishes are still dirty, so it appears that either there is no water to disperse the soap, or does the door really open? Any ideas?


Check the wash arms to see if food has not cloged the holes stopping water getting through\015\012if these are clean the machine may not have enough water entering machine\015\012also check how you stack machine ... Dishwashers

Dishwasher Issues My dishwasher is not properly dispensing the dishwasher soap. The flap on the soap container seems to be opening, but the soap is always caked in there after the cycle is finished. I have tried leaving the soap flap open, but that just seems to deposit soap particles on the dishes in the front of the bottom rack. Also, there is often a greasy film left on many of my dishes. Is this a soap issue or a water issue? I am very frustrated! Can you help?


I would try using a different soap or less of your current soap. ... Maytag 24 in. MDB4100 Built-in Dishwasher

Soap container stopped opening - Dishwashers


Hi, I solved my problem with a free download by the manufacturers, of the users manual, thanks.Cheers, Liz ... Dishwashers

Dishwasher Kenmore 665.1599.Just begening to wash and it stop. Water in the bottom and soap container open. electricity ok


... Kenmore 24 in. 15932 Built-in Dishwasher

I have a kenmore dishwasher. the soap dispenser lid was not opening and releasing the soap, now the lid is opening but it's leaving the soap in the dipenser. have used the pellets that contains the liquid soap on one side and the dry detergent on the other. have used regular liquid dishwasher soap too, doesn't make a difference, help!


Disasemble the pump housing and remove the debris that are located in the housing, not enough pump pressure to spin the spray arms to desolve the detergent ... Dishwashers

The is for the model: DDW1899WP. The cycle is getting stuck in the first phase and the soap container is not opening. When I open the soap contain, water has seeped in because the soap is moist and hard rather than loose and powdered. In addition, water is pooling int he bottom of the dishwasher. I tried adding more rinse aid because that has solved the problem in the past but it is still persisting.


Looks like there are two problems here\015\012\015\0121. the controller is not sending a signal to open the soap dispenser door at the right time when the water is flowing through it\015\0122. the drain motor is not pumping the wate ... Danby DDW1899WP Portable Dishwasher

Soap dispenser The soap dispenser door does not open automatically as it should... stays closed throughout the cycle unless we stop the cycle, open the dishwasher door and then open the soap dispenser door any suggestions? This is a Maytag DWU 9200.


A wax motor controls the opening of the lid. Also a seal that fits around the latch lever may be deteriorating and obstructing the function of the lever. Follow the link below for images and part numbers with cost.\015\012Item# 1405...$20.30 ... Maytag 24 in. DWU9202 Built-in Dishwasher

I tried the steps listed at this website for the same issue I am having. http://www.fixya.com/support/t273954-kenmore_elite_dishwasher The steps worked to get the dishwasher to "reset" with all the lights coming on. The problem I am having now is that after the "reset" the dishwasher starts to run a small cycle for about 5 minutes. Upon opening the washer, nothing has happened inside (no water, no visible movement of parts, no soap container opening). Upon closing the dishwasher and trying


I think think the water fill is ok and the drain is ok as it uses a seperate drain motor . but what is not working is the main wash motor . so no water is moving and the wash arms are not going around and the lights ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

My dishwasher has stopped cleaning plates properly. It makes everything wet but at the end of the cycle the detergent block is half dissolved at the bottom. I have just run a cycle and opened the door during this. The bottom is full of soap suds and water and the top spray bar is dripping water after I open the door but when I close and then reopen a few secs later the top spray bar has definetly not rotated. The water is also not hot, this dishwasher is a cold fed only machine so I guess the el


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Zanussi 18 in. ZSF4123 Slim-Line Free-standing Dishwasher

I have a 4yr old Smeg freestanding dishwasher. Model is DF612SDX. The problem is that a wash cycle will start but about 15 mins in it stops and 2 of the programme option lights (on the left hand side of the programme options), start flashing. If you open the machine the soap dispenser has failed to open. This problem has been a bit of a slow deterioration as we've had a number of washed that have managed to finish and then noticed that although the dispenser has opened it must have been to


... Smeg 24 in. DWF612SS Free-standing Dishwasher

About a month ago, our dishwasher stopped working properly. It runs fine and the soap is being used, but the dishes are not being cleaned and especially on the top rack. I opened the dishwasher this morning while it was running and I noticed that the coil on the bottom was red (maybe heating water) but only about 1/16th of it. Could this be the problem?


Hi\015\012In a dishwasher you can see the water trickle upward to the upper nozzle in dishwasher...but if it does not have enough pressure,it will not function properly.tap the delivery tube that feeds this nozzle and you will see the water pre ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

Lg Dishwasher Model #LDF6810WW will not stop runningafter thr 2hr. cycle is up additionally, it has recently stopped opening the soap dispenser. Any suggestions? Recently I also had an "LE" motor error which went away once I repaired/respliced 4 wires on the front of the door panel, which were frayed due to that hot tar substance they are placed in at the factory.


... LG LDF6810 Built-in Dishwasher

Electrolux Dishwasher Model EIDW6105GB1... no error codes...I select the cycle, everthing appears normal...start to hear water fill, but doesn't progress to point of opening soap container. When I open the door all lights are blinking. I've canceled and tried various cycles, but with same result... all lights are blinking. Even tried just a rinse only. all lights still blinking.... This unit is only 4 years old!


... Electrolux Dishwashers

The flapper that holds the soap in for the next cycle will not open automatically . I have to stop the dishwasher and manually open it. Any suggestions.


Verify the bottom tray is allowing clearance for the door to open, a reveresed tray blocks opening... ... Jenn-Air JDB6510 Built-in Dishwasher

Lg adora model no.ghda696pss serial no.sr800098c dishwasher takes in water but no washer arms are going round and the soap container does not open at the end of the cycle the dishwasher empties and heats the utencils which have not been washed.


Hi.Ensure that there is water getting inside the machine. If there is no water, then the water level switch or the water valve may be defective. The door lock switch must also be tested.If there is no water getting into the ap ... LG Dishwashers

FDB105OREC4 My dishwasher is not cleaning my dishes. I push the start button and water seems to be trickling in then it stops and no sounds protrude from the machine for several minutes. Eventually another loud motor seems to turn on and drain the water out of the machine. The soap dispenser usually opens and the soap block that usually dissolves is setting on the bottom of the machine. It seems the water is plenty hot but the rotating washer arms might not be moving. Please help me find the par


... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

I am getting a clicking/ticking noise (1 click/second) from my Maytag (model MDB9100)dishwasher after it goes through its auto clean normal wash cycle. At the end of the cycle the arrow = clean and the clicking sound is there. I opened the washer door for about 1 minute noted the soap containers are empty, dishes clean, machine still hot/steamy. Closed the washer door and the clicking sound resumes. Please advise.


This is the heated dry timer going through the drying cycle until the dishes are dry. The dry cycle runs on a timer and it will click through the cycle until it finishes the amount of time preset on the timer to dry the dishes. ... Maytag MDB9100A Dishwasher

I wired my Bosch Dishwasher wrong and did a quick wash with it. Later on it stopped working and I figured out I had wired it wrong. I then disconnected it and rewired it. It buzzes for a bit then swishes some water around inside then buzzes again. When I open the door after it says clean it has murky water in the bottom like it was mixed with soap but never emptied. What did I do?


I hope this is not a quiz. Can you please clarify what component did you wire incorrectly inside the dishwasher? Did the dishwasher have a fault that you were trying to rectify.\015\012\015\012it will also help if you provide the full mod ... Dishwashers

No matter which cycle selection in pushed, the dishwasher only starts up in the "normal" 93 min cycle. If I try other cycle options, and persist, I get an ER message and the cycle stops prior to the soap powder door opening and never completes the cycle. Only with turning off power for several minutes and receiving the PF message, and resetting ONE TIME that message can I then select any cycle, at which time the machine "defaults" to the "normal" full cycle. If I do not disturb that cycle, it wi


Looks like you are having a good deal of problems with the dishwasher.\015\012\015\012It will be helpful if you provide the make and model no. of the dishwasher.\015\012\015\012At this stage I can speculate the controller (ass ... Dishwashers

I have a kitchenaid dishwasher model kuds24se with a problem. I MUST hit cancel before I hit start. Note that it doesn't matter how long it's been since the last cycle. It could be a few minutes or a day or more. I have to hit start to get a complete wash cycle. If I don't hit cancel, the washer goes through some sort of cycle and stops. It seems like a normal cycle but of course it is not because I don't hear any water and, upon completion, when I open the door there is heat but the soap dispen


... KitchenAid KUDS24SE Built-in Dishwasher

Gsd5500 ge dishwasher normal light flashes when locked and nothing happens. also the soap container will not lock closed, it just returns to its open state


... GE 24 in. GSD5500G - Multiple Color Built-in Dishwasher

Maytag e3 coming up motor stops statrs does cycle on off after e3 comes up but starts when soap dispenser opens model mjd2000aaw dishwasher


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. E3 error means that the water heater element does not work properly or the\015\012filter mesh is blocked. ... Dishwashers

Soap door doesn't open and dishwasher stops before completing its cycle.KitchenAid Model #KUD122XX Purchased in 1992


You are in need of a dispenser. you can purchase it online and they will ship it toyou. searspartsdirect.com. you can view it and everything.\015\012if this helps please give me a 4thumbs up post thanks ! ... Dishwashers

My Bosch dishwasher stops with one minute left on the timer but keeps running most time the soap dispencer door has not opened


Ok The soap dispenser is controlled by a wax plunger. This is mounted in the door on the back of the dispenser. Remove the door panel and gain access to the wax motor. Two wires connected to a brown colored small rectangular box about 1 inch long.You ... Dishwashers

My dishwasher a Maytag DWU9200BAM is leaking water from the bottom of the door during the wash cycle. Also my soap dispenser has stopped opening. Is it easy to fix these things?


... Maytag 24 in. DWU9202 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1970 seconds