Having problems with your Dishwashers ?

I am having problems with my smeg dishwasher door. The machine is three months old. The bottom left hand corner of the door is catching on the outer wall of the machine and catching and cracking the bottom plastic drip tray. The model is SA8210w


Answers :

This a faulty installation and adjustment of the door. Whilst it is not directly a manufacturers fault it should be covered anyway, as installation is generally by the distributor or the manufacturers agent.It is also generally condsidered under law that the machine will be installed correctly , using all recommendations for adjustment according to the manufacturers specifications

Call The distribuitor you bought the machine from and make a warranty claim. Be sure to mention the damaged pieces, so they can arrange replacement parts to be brought with the service person.


Thanks for using FIXYA


Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I am having problems with my smeg dishwasher door. The machine is three months old. The bottom left hand corner of the door is catching on the outer wall of the machine and catching and cracking the bottom plastic drip tray. The model is SA8210w


This a faulty installation and adjustment of the door. Whilst it is not directly a manufacturers fault it should be covered anyway, as installation is generally by the distributor or the manufacturers agent.It is also generally condsidered under law ... Dishwashers

The plastic recessed door handle on our Smeg Model PL823X Type 11053 has suddenly cracked and broken away with normal handling which makes it difficult to open the door. We are told we need a a complete new program selector panel, that is very expensive and we are informed we may as well but a new machine. Is that true and is that good design? Purchased about 2006/7


... Dishwashers

Our Amana ADB1500AWW dishwasher leaks at far left and far right edges ( at bottom points) of the inside door panel due to a design flaw. ie - In the fully open position ( door in horizontal position) the far left and far right edges (at bottom) of inside plastic door panel are stressed beyond what the plastic can withstand consequently the edges of the panel crack as far as 3 inches from edge to inside. This crack is very small and cannot be seen until the panel is removed and then full insp


... Amana 24 in. ADB1500AW Built-in Dishwasher

I have a Kenmore Model 665.15955792 dishwasher. Water is leaking out the bottom of the door. I changed the door seal and the defusers but it continued. I took off the front of the door and I see the water filling into the base of the machine. When the dishwasher starts the cleam cycle, water is pushed up into the small square holes in the bottom of the door and then splashes up over the lip of the door and out onto the floor. It has never done this before, just started recently. I have had the d


... Kenmore Dishwashers

Myy kitchenaid dishwasher model kudi01flss doesn't start even though the lights on the panel light up so I opened up the door to look at the latch and found a broken plastic piece that appears to be part of the latch. Could this be why the machine doesn't start. The funny this is the door still seems to snap closed even with this broken piece but what I'm thinking is that this piece activates some sort of electrical connection that turns the machine on when the door is closed. Any thoughts on th


... KitchenAid KUDC25CH Dishwasher

My Bosch dishwasher is Exxcel 5 prg model no SMS50E020GB. When you first open the dishwasher door after the washing cycle finishes there is no water in the bottom of the dishwasher but about 45 minutes later water slowly appears in the bottom of the dishwasher. I scoup out the water and there is about 3 litres. The machine is just over 2 years old. I had a plumber check the machine and he couldn't find anything wrong with the machine. Another plumber came out and put on the invoice: "disma


... Bosch Dishwashers

We have a Bosch Model SKT5102GB/07 and the problem is as follows; we load the dirty washing and start the washing process, the machine then goes through the full cycle of wash. Once finished you open the door and notice that the washing is still dirty and a large pool of water is laying in the bottom of the machine. We have had an independent engineer look at the machine and he has advised that the pump needs changing. Look forward to your reply, thank you. Regards Michael Ballard.


Replacement parts are available here\015\012http://www.repairclinic.com/SmartSearch/SmartSearch.aspx\015\012\015\012on the narrow ... Bosch Dishwashers

I have a Bosch dishwasher, model SHU9915UC/U11. The spring mechanism on the detergent door cracked, and I bought the part to replace it. I took the front cover off of the dishwasher to determine how to replace it. Two white plastic "things", maybe spacers, fell out. I need 2 things: a) how to gain access to the spring on the detergent door so that I can replace it, and b) how to put the door spacers back on. An exploded parts view would probably help a great deal. Michael J. Orr


Hello! This is Guru...Saailer...I have your information...Due to size limitations I'll need your e-mail address in order to send it to you...Send an e-mail to me and I'll send an exploded view diagram and parts list...Guru...saailer... ... Bosch SHU9915UC Dishwasher

Whirlpool model GU2400XTPQ7 (Canada) plastic tub has discoloration from heat element......plastic directly under the element has dried out and cracked....it almost looks like it has been eaten away......now I have a leak! Virtually impossible to fix without replacing the entire plastic tub. Of course because the machine is four years old, the warranty has expired. Is this a common problem? Heard of this before?What now???


... Whirlpool GU2400XTP Built-in Dishwasher

Maytag model # MDB9601AWB - when the cycle is selected; door is closed; the machine fills up and shuts off - the cycle does not run. Water remains in the bottom resevoir but does not run. we have attempted a number of cycles but same thing happens, machine does not run at all. This machine is less than 6 months old - it was installed by a licensed plummer recommended by Keidel's appliances in Kenwood Ohio.


Has it ever worked.. sounds like a wire could have been pulled off the motor...if only 6 months old... call a service company the is factory it will be covered under WTY ... Maytag Dishwashers

I have a model MDB7100AWQ, it fills with water but the motot won't start. Is there a reset code for this model? I did find a melted off plastic spoon handle in the bottom, could this cause it to trip something in the unit? The lights on the door switches come on but it only clicks, and won't start.


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. To start with check the\015\012door switch if that\342\200\231s fine then you\342\200\231ll have to replace the ... Dishwashers

Door Catch Model: S51M53X0GB/28 Hi there, Door is not closing properly since last washing cycle and is preventing the machine from starting. Just over 2 years old so just out of warranty. Any ideas?


... Neff Dishwashers

Got standing water in bottom of dishwasher model #GSD5500GWW/CC/BB. We found some plastic cake decorating tips in the standing water, and hear crunching like more tips when we turn the machine on. How do we take remove the spinning thing in the middle, or anything else, that would allow us to clean out all th plastic tips?


... GE Dishwashers

We have a Maytag "Dependably Quiet" Dishwasher approx. 17 years old. The door doesn't close properly (after I mistakenly lifted and pulled on it at the same time to pull the machine out slightly further). It seems to have dislodged at the bottom somewhat and I don't have any repair manuals that show how it is secured. Both of the springs and plastic hook mechanisms are in place for either side, however, it has dropped slightly down on the left side and binds on the bottom access panel. Any h


It would be helpful if you provided the model number of your dishwasher.\015\012\015\012See below links to service manuals for a few models of Maytag dishwasher, not sure if any of these is yours. I believe the last one might be the Quiet ... Dishwashers

We have a 6 year old Jenn Air dishwasher model JDB2150AWP We had a cracked door close unit which we replaced but got a short while restoring connections I am wondering if there is an internal circuit breaker, relay or fuse on these machines that we need to check and possibly replace since we cannot get it to run at all. No power or lights at all. I believe all connections are secure and we replaced the door close unit with new parts.


... Jenn-Air 24 in. JDB2150AWP Built-in Dishwasher

We have a Hobart dish washer in our bar area and when it sits over night there is a pool of water on the floor in the morning. When we open the door and look at the upper right corner in the rear of the machine we have a steady flow of water running down the rear wall. When looking at thge machine where the black 1 inch water hose comes up from the floor there is a plastic T in the line with an electric wire the goes into the side of the T. I am guessing tha that is a sensor valve that is suppos


The model is most likley a lx18,lx30,lx40.The fill solenoid valve is stuck open.Remove the 2 screws on the bottom front where the pressure gauge is.Turn the circuit breaker off.When you remove the cover you will see a bronze valve with a red hose goi ... Hobart Dishwashers

Hi, we have a Bosch Exxcel dishwasher which mid way through a cycle a button saying Check Water came on. we turned the machine off and opened the door and found loads of water in the bottom. my husband then scooped all the water out and cleaned filter in the bottom, where we did find some bits of plastic from the kids yoghurt pots, and took the water hose off the back and checked for blockages, which there was none. the water is certainly coming from the water pipe through the hose as we tested


Check your water level sensor. And also check to make sure that your pump is working correctly. It sounds like a couple of different things that need to be addressed. First check the water level sensor. It is a tube that is located from the back of t ... Bosch 24 in. SHU43 Built-in Dishwasher

I have a KitchenAid Dishwasher Model #KUDS03FTSS0 for about 1 1/2 years. Within the past week I have noticed it being noisier then before. I pulled off the bottom panel and the noise appears to becoming from the middle of the machine, an area that is covered by a semiclear plastic case. It has this noise when it is turning the spray wheel inside. Can this be the motor going bad? I installed the dishwasher and marveled at how Quiet it was. Now it's not that quiet machine in the kitchen.


The motor is going out. this is a warranted part, so call for service and just pay the labor ... KitchenAid Architect? II S SERIES KUDS03FT Stainless Steel Built-in Dishwasher

Free standing hobart model KDD 60A Serial # 222601715 Washer does not start when door is closed and locked. Electrical power to wall socked operating. Machine plugged in. Water supply connected. Start attempted in rinse cycle and wash cycle.


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. This issue can be either due to a faulty door latch or door\015\012lock switch which is not engaging its ... Hobart Dishwashers

Kitchenaid Dishwasher model # KUDS25SHBS1 has started making noise. Noise happens when unit is draining so perhaps its the same mechanism that houses the grinder. Can definetly hear a clicking as something spins around to drain the unit. I have removed the washing armature and plastic skirt around bottom and felt underneath the skirted area, but don't feel anything caught or jammed. Noise is getting louder as more draining cycles are being utilized (i.e. as we use the machine more). Anyone have


Looks like motor noise. Check the pump. ... KitchenAid 24 in. KUDS25 Built-in Dishwasher

GE dishwasher model gsd1200 g06. Need black panel insert for door and bottom foot panel.GE site has these but the cost is as much as buying a new dishwasher ($150) for both. These are just colored plastic or vinyl. The measurements are 23.5''by 19.125'' and the other is 23.5'' by 3.75''. Are these available anywhere? John Shuler [email protected]


... GE Dishwashers

My Kitchenaid dishwasher Model KUDPO1FLSS3 stopped working. The electrical works, as we checked the breaker and the little lights on the panel turn on, but the machine will not start. We're thinking there might be a problem with the connection where the door closes. We've checked out everything we can think of, but no luck. The plastic panel is worn away in places, so some of the buttons are exposed-can't imagine that matters, though. Help!


... KitchenAid Dishwashers

I have a Maytag model MDB8600AWB dishwasher that has broken one of the plastic wheels that fits in the lower sliding rack and is attached to the rack portion, rather than the machine wall. Can you provide a current part number? thank you for your time and help


... Maytag MDB8601AWB Built-in Dishwasher

I have a Kitchenaid dishwasher model KUDS01FLSS2. I finished replacing the door balancer cord and started the dw up and it started leaking underneath from the bottom somewhere around the middle of the unit. This is when it first enters the cycle, so there is no water inside. I pulled the DW out and look at the hoses and components under the DW and all looks in good shape and could not detect any cracks. However noticed that one of the hoses (not sure what the hose is called) that connects to the


In this Kitchenaid dishwasher model KUDS01FLSS2, the whole motor and water pump assembly simply sits (I think loose) in the bottom of the DW. From the inside, it is the round mechanism where the sprayer is mounted above the chopper, all one piece sit ... KitchenAid Dishwashers

I have a Diplomat Fully integrated dishwasher model ADP 8242 when put on any program it fills and seems to be washing then stops after 5 minutes and the dispenser door has not opened. There is a lot of water left in the bottom of the machine which is cold water. Any suggestions?


Check the small drain pump. Possibly its asking the pump do drain to allow for fresh water, but because low level is not detected it shuts down. The dispenser draw normall opens when the hot wash cycle starts.When you think its washing,briefly open d ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1802 seconds