Having problems with your Dishwashers ?
My dishwasher (Kenmore Elite 665) doesn't use up all the detergent in the detergent cup - it always leaves a little behind at the end of the cycle. the dishes don't get quite as clean any more, either.
I recently replaced my old water heater - we were getting lots of little plastic pieces in our faucet screens. I'm guessing that the water pressure may be low, and that it may be due to the same problem.
Is there a screen-type filter that filters the incoming water, before it enters th
I don't believe you have a screen at any water feed and doubt that would be the problem. Once the washer fills the pressure to the cleaning arms is provided by the pump itself. I have this issue every couple of months due to hard water and the calcium build up it causes. Try running a bottle of Dishwasher cleaner through the machine. You can find it near the dishwasher detergent in the store. Another option would be to start a regular cycle, with an empty machine, once you hear the sprayers start after it has filled add 1 to 2 cups of CLR cleaner to the machine and let it complete the cycle. If build up is the problem this will clean it out. As far as not using all the detergent that could be the brand you are using. I switched to the cascade packs to solve the issue, they have the detergent and Dawn in one self contained tablet. Other brands had residual soap left in the bottom of the machine. Hope this helps.
Repair Help & Product Troubleshooting for Dishwashers
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
My dishwasher (Kenmore Elite 665) doesn't use up all the detergent in the detergent cup - it always leaves a little behind at the end of the cycle. the dishes don't get quite as clean any more, either. I recently replaced my old water heater - we were getting lots of little plastic pieces in our faucet screens. I'm guessing that the water pressure may be low, and that it may be due to the same problem. Is there a screen-type filter that filters the incoming water, before it enters th
I don't believe you have a screen at any water feed and doubt that would be the problem. Once the washer fills the pressure to the cleaning arms is provided by the pump itself. I have this issue every couple of months due to hard water and the calci ... Dishwashers
I have a Whirlpool Gold Quiet Partner III that is 8 years old and recently stopped cleaning top rack dishes. I remember finding a mylar like piece in the bottom of the tub and threw it away thinking it came off of something we washed (I know, bad thinking.) The mylar piece measured roughly 3-4inx2in and was folded in half. Anyways....the upper arm does not spin and the detergent doesnt get fully dispensed so dishes dont get fully cleaned. I am guessing not enough water pressure to upper arm. Wou
I'm having a similar issue. Are you sure the arm isn't moving at all?\015\012\015\012Generally what I'm finding is either you have a clog or the pump motor is bad.\015\012Hear is the service manual.\015\012 ... Dishwashers
Soap feed The soap feed hose on my Karcher 2650 does not suck up the soap into the washer. I pulled off the connector piece that the hose is connected to. I can blow through the hose. There is a little metal finger thing that you can tell pushes up into place when the water pressure is high. It seems like it is supposed to drop down and allow some soap through when the water is running. I found a loose(attached to nothing) gasket, looks like a little donut. It was just free floating in t
I fixed mine works good too, watch my video step by step i put it on youtube ... Karcher G2650HHR Gas Pressure Washer
I have a McCULLOCH 1500 psi pressure washer and it seems like I need the top part of therod where the waer comes out it no longer adjusts the water stream seems like a little plastic defkector that you adjust your stream with, snapped and broke looks like I HAVE TO REPLACE THE ENTIRE TOP PART OF THE 2 PIECE ROD on the bar it says the following max130barmax60C PA66-GF30 Where could I purchase this piece Andy Nowostawsky my adress is 15447-rue d'esterel Pierrefonds,Quebec H9H 1Y9
... McCulloch Pressure Washers
Not draining had water pooling at bottom of dishwasher. i've taken apart as much as i know how to but can't figure out how to get the last piece out - where the little wheel is located i guess used to flow water? lines look clean
The drain pump is separate from the was motor and is accesed from underneath the dishwasher that help wash moter is one piece and is replaced as a whole unit and the drain hose comes from the factory making a loop up side the tub a lot of installers ... Frigidaire 24 in. PLD2850 Built-in Dishwasher
Appliance had been working fine now all of a sudden no water is running in the dishwasher.The machine appears to run through all of its cycles but without water. The water pressure in the ajoining sink appears a little low though the water pressure in the rest of my home is fine. I see no water leakage anywhere. Do I need to call an appliance tech or should I call a plumber? Thank you.
... GE GSD1000 Dishwasher
Whirlpool Dishwasher GU2548XTP- Dishes still dirty after it has run, especially the top rack. 5 (?) yrs old. Runs and grinds intermittently, no water seen under unit. Sometimes I add more water when it grinds, then it runs very quiet. Sometimes it doesn't seem to fill enough. Water supply good, inlet screen inspected not clogged. Not a lot of pressure shooting the water around the inside of the unit, as the detergent that bleeds through the slotted half of the detergent flip door isn't r
The inlet valve is OK, therefore the control board was not the problem. The impeller pump is noisy and inefficient, and must be replaced.Here is the part: ... Dishwashers
Shark pressure washer with honda 5.0hp motor when in use spraying with good pressure it the pressure shuts off and motor sounds like its about to shove a rod through the cases shut it off restart it andd the same thing occurs all fluid levels good pump and motor. water pressure from hose bib good. may b low water pres. for short time due to possible kink in hose reel not sure
What type pump oil to usefor karcher 2400 psi ... Honda Pressure Washers
My pressure washer is not pressurizing the water. i took the bottom assembly off the pump and there are three spring loaded plastic pieces in there. underneath these springs is a mushroom shaped plastic piece. two of the three mushroom pieces were contorted and need to be replaced. how do i get them?
Craftsman 2200 psi pressure washer 580.752341 ... Pressure Washers
I recently replaced the water seals, V-packing & all six check valves in a CW-3504-4MGH pump on a MiTM 3504 pressure washer that had very low pressure. Usually this would fix most pressure problems on most machines, but in this case it had little to no effect. I suspect that the unloaded is the culprit in this case, but since I have had little experience in repairing unloaders (let alone adjusting them). I would appreciate feedback from anyone that has experience in this area. Thanks
Check the wand tip for a tiny piece of debris like a tiny rock or something stuck in the tip. ... Mi T M Pressure Washers
Error Code E1 means longer inlet time. possible causes faucet is not opened, or water intake is restricted, or water pressure is too low, according to the BRADA portable dishwasher model EP9242AWW What does that mean and how do I fix it? I have shut the water faucet off and the error message still shows.
I ran a load of laundry in whirlpoo[ duet ht, model ghw9400pl4, error code p-09 was indicated. water was overflowing from door, and water was continuing to fill the tub. I turned off the faucets, unplugged & restarted in drain mode it hummed but would not drain. I turned the faucets back on and retried to drain but it would only hum. I manually removed the water by losening pump filter. There was no debree in filter except for a little bit of hair. The pump & vain was free & clean, and I co
It is your mixer value that is malfunctioning. ... Whirlpool Dishwashers
Little water pressure in bottom arm - no water
There's a bunch of gunk in the pump that needs to be cleaned out. It's not that easy to get to, so you might want to hire a certified professional to clean it out.\015\012\015\012If the technician tells you that you need a new pump, tell ... Dishwashers
We have BOSH DISHWASHAR SRS3009. The water electrical pump is working, but remains on the bottom of cabinet dirty water. I have clean filters in the cabinet and put all pieces of food that may harm to the pump. May be i have to clean some additional filters? I will appreciate your help Michael Yachnis [email protected]
To remove object from trap/cylinder assembly\015\0121. Remove bottom rack.\015\0122.Graspthe assembly and turn it a1/4 turnclockwise.\015\0123.Lift outthe assembly\015\0124. Carefully examinethe assembly.If you find debris in ... Dishwashers
I have a Campbell Hausfeld RBPW1810 pressure washer, It has two detergent tanks. I cann't get either to work. I just purchased the unit in June if this year and this is the frist time I am useing the unit. I followed the instructions (low pressure position on the nozzle) and the detergent came on for two second then stopped (only water then). What am I doing Wrong??? Rich From Alqonquin, Ill
Sometimes thinning the solution will help, but in any case make sure the line from detergent tank to pump is sealed, otherwise it just sucks air. I use a small hose clamp at pump. let us know ... Campbell Hausfeld 1800 PSI Electric Pressure Washer
Hi, My question involves a:Honda GCV160 5.5Chore Master 2400 psi Model CV-2400=4MHC I have very little use on it. I broke the sprayer hose on it the other day and ordered a new one for this model. I connected my water supply, turned it on, started the machine but have VERY little pressure. What do you feel my problem is and how can I remide it? Thank You! Louie [email protected] Boundary Waters Taxidermy, Ely Mn. 55731218 365 6310e
\015\012put in your garden hose \015\012turn on the water\015\012leave it to run for one min.\015\012kink the garden hoes\015\012connec ... Pressure Washers
Hi. I'm scratch building a pressure washer using a Comet BXD2831G pump. If I don't plan on using any type of detergent, is it OK (or manditory) to plug the detergent intake to keep it from sucking air? I would use a short piece of hose over the intake with a screw in the opposite end. Also, is it possible to set the pressure by ear? If so, what should I listen for? Thanks for your help!
No need to plug the injector because under pressure (internal force/pressure) keeps valve shut. It only opens when large nozzle (black tip) is used lowering internal pressure causing siphon effect. Some chemical injectors have a thumbwheel ... Comet GXD2527G Pressure Washer Pump
The pressure washer motor is running and water is flowing through but there is little to no pressure on the water coming out
Pour liquid TSP into the fresh water port (where the garden hose connects) and let it sit there for a couple of days.\015\012This will clean all the calcium and lime deposits within the pump.\015\012This is how I fixed my pressure problem ... Honda Pressure Washer PSI 3000
We have very hard water and it's leaving a white film on the dishes and tub. Regular dishwasher detergent may be the cause. . What is the best way to remove the hard water residue and what detergent should be used to avoid this problem in the future. The dishwasher is two years old.
You have to use water softeners available in cartridge form. attach this to the inlet pipe. If there is a compartment for salt in your machine fill it with special dish washer salt availble for this. (Pl do not use kitchen salt ) ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher
I do not seem to get sufficient water pressure in the machine.There is sufficient pressure at the faucet adjacent to the machine. Is there a filter that could be removed and checked for debris in the water supply line?
There is a screen in the water control valve try disconnecting water line at the d/w with water turned off after line is off get a bucket and turn water on to see if there is good pressure if there is good pressure I would say it is the water control ... GE 24 in. Profile PDW7800 Built-in Dishwasher
When I turn on the shop force 1750 electric power washer I get water pressure in intermittent time frames. For example, it may run for a second then stop for ten seconds, then start again for three seconds then stop for 3 seconds then start for a half a second then stop for five seconds etc. until ?. This type of pattern continues for at least ten minutes, which is when I give up. I have tried adjusting the the water hose pressure, high, low. middle, nothing changes. This happen when I have the
The usual cause of this is sticky Orings in the water admitance valve.\015\012\015\012Take the valve apart and clean the bore with crocus cloth wrapped around a rod and replace the Orings and lube with a bit of plumber's grease and reasse ... NIB Shop Force Universal Pressure Washer Accessoriesnib
I have a Karcher 3.99 Pressure Washer. The motor appears to be working and water is passing through the machine when turned to the detergent application setting. However when the lance is tightened to turn on the pressure, no water is coming through. The Karcher is just over 1 year old David
Hi I have a karcher 3.99 the motor comes on and water comes out however thre is no pressure i have tested the lance on my brothers washer and this is ok what is wrong ... Karcher K 5.85 M Electric Pressure Washer
Water keeps popping off t he detergent cap.. even though water is not even hook up.. guess it is detergent popping out .. what is wrong with it.. cleaning fitting is not even on
Detergent non return valve stuck, allowing water to back feed into the chemical tank.depends on what machine it is as to where the non return valve is. ... Karcher Pressure Washers
Power washer Briggs & stratton model 2200 from sears. Just pulled out of my shed. Runs fine but water pressure is really low. I cleaned everything that may be blocked. Water pressure from house is ok.. I'm lost Help thank you.
... Pressure Washers
The water fills slow and rinse has very little water pressure, I have pressure as far up as the celenoid and cleaned the washer wands&nozzles. there's an elbow with a fitting in it and 2 wires.can you tell me what this is and or give advice to a solution
... Hobart AM14C-155 Dishwasher