Having problems with your Dishwashers ?
I haven't used it for a year and it doesn't work now
\015 Hello! I have a Candy dishwasher. I haven't used it since I had it installed, which happened a year ago. I tried to follow all the advice, but after a few minutes the dishwasher beeps a few times and it stops and it doesn't go on with the washing process. What should I do?\015
Is the door closed all the way it could be a faulty door switch,ajust latch or replace switch it could be a faulty timer,or motor needs to be cleaned to reach motor remove lower front panel and vacuum dirt,hair out and clean wire conections unplug unit first thoe,try this out thanks
Repair Help & Product Troubleshooting for Dishwashers
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Hi, I have a Dewalt pressure washer 3100 psi. I want to know why the pressure washer works okay for 1 hour then it stop working completely. the oil is fine, the spark plugs are okay, and when I tried to start it again it does not work. Can you please tell me what could be the problem? This pressure washer is almost brand new I have used it for only like 30 hours for 2 years that I have it. I used it couple times lately but same problem it works for 1 hour then it does not work any. I will
There are two common issues that will cause what you are describing. What you need to do is run the machine until it dies as you are describing. Then pull the spark plug and check for spark. If you do not have spark you have a failing stater. It is v ... Dewalt DPH3100 Gas Pressure Washer
I have a mi-t-m pressure washer in the ca-series.The problem is the motor shuts down at times with out any reason. The first time I used it was on a house with a well supplied water. It worked fine,brought it home where I used it with no problem. It was used twice that first year. I then winterized it.The second year brought it out to the same house,I was using it for about a half hour when it just shut off with out any notice. I noticed there was back pressure in the engine when I tried to rest
Mi-t-m pressure washers have a Low Oil shutdown feature that turns off the motor, this is often causing similar problems on this kind of appliance.Have oil checked, if oil is fine , then the sensor that controls oil pressure and activate ... Pressure Washers
My 2-year-old LG Dishwasher doesn't clean the dishes well any more. It used to work great, I was very happy with it. For some unknown reason it doesn't work that way any more. The dishes come out dirtier then they were before I put them in. I had three guys come in and look at it and they all said that there is nothing wrong with my dishwasher. My water heater is 1 year old, works great everywhere else in the house, the dishwasher is hooked up the right way, by a professional, I don't have hard
The heater does not heat the water it keeps it hot check there first id say the heater or thermal is bad if both check good replace control ... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher
Looking for info on our churches dishwasher - Toledo Kitchen Machines. Model # TDA27. I can describe it as a single cycle dishwasher. Wondering what type of detergent to use and if there is a manual available. There is a small seal leak between the motor and the pump, other than that everything works. ( this has not been used in 10+ years).I am now in charge of bldg maintenance and am trying to get everything in working order. Any help is appreciated. I am guessing the circa is mid to late 60's
Dishwasher Repair Guide: How To Fix a Dishwasher - ACME HOW TO.com\015\012\015\012\015\012\015\012 ... Dishwashers
When i turn my pressure washer on it works for a few mins then smoke comes out of it and it cuts off. i bought it last year and only used it once and this happened when i have tried to use it this year. its a karcher pressure washer thanx
Sounds like a motor problem. ... Karcher K2.26 Electric Power Washer
Quiet Partner II Whirlpool Dishwasher 2 years old, used about 6 times in 2 years. Panel LED's flashing like a Christmas tree: Pots / Normal / Sani / Cancel lights all flashing Tried different resets as found on web but none work. Dishwasher was NOT being used when the flashing started. Need reset sequence if there is one.
Unusual LED or\015\012Display Readouts\015\012Open ID diodes and/or LED\015\012circuit(s) in keypad, or open\015\012ci ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher
This dishwasher is older than most living people in this business. It works great except it is a 208 three phase unit. It is in St.Peter's church in New York Mills, MN. We bought it used during our remodel project in 1994 for a price of $800.00. That was our mistake. We had a converter installed to accomadate the 3 phase power supply. So we have this converter running 24 hours a day using up electricity and we use the dishwasher four times per year. I am wondering if we could replace the motor o
This unit is a dinosaur. The 3-phase converter had to cost twice as much as the unit. Best solution - turn the power off to the 3 phase converter when not in use.Better best solution - find a newer unit that will be repairable should it n ... Hobart AM14-253 Free-standing Dishwasher
PDW9280J10SS dishwasher has been in use for about 3 years. The control panel is not working properly. I use the up/down arrows and it turns on heated dry etc. When I push the heated dry button, it changes the lights to the different cycles (which is what the arrow keys used to do). The normal wash light won't come on, the only setting that seems to wash a full cylce is antibacterial. It seems like something burned out. What should I be looking at as a possible cause/fix. Unfortunately, I don't h
... GE 24 in. Profile PDW9280JSS Built-in Dishwasher
My kitchenaid dishwasher leaves a white residue on clean dishes. 4 year old appliance, worked great until 6 months ago. under warranty, service repairman said i was using too much soap( am not). he cleaned it with salt and vinegar stating i had lots of suds when he ran a rinse cycle. i always use jet dry and don't use the heat drying cycle. it didn't improve. i tried different soaps, more vinegar, and finally bought a special product to clean the dishwasher. the inside is stainless steel, very c
Hi,The scum, film and white residueproblems have started since the reductionof phosphates in dishwasher detergents.Here is a tip that will help you to solve the problem of films, residue, and scum in your dish ... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher
Have karcher k3.150 and it worked ok last time used and next I went to use it it was dead. is there a fuse to replace somewhere in it or other easy fix. It is about 2 years old but only used it 3 times.wife did a clean up and I can't find the manual.
... Pressure Washers
My dishwasher is leaving a film on all the dishes some of the times. Other times the appliance works fine but more and more often it is leaving a white film on all the dishes as though the rinse cycle is not working well. I have tried filling the jet dry compartment and have been using the same jet dry and detergent as always. The dishwasher is about ten years old and has been working well up to a few weeks ago. Ideas?
Check inlet water quality & whether softening salt is required. Check and fill rinse aid. refer user manual. ... Maytag 24 in. MDB3700 Built-in Dishwasher
Hi, I have a one year old karcher k.2.360, which has worked fine up unitl now. However, when I tried to use for the first time in several months, the detergent feed doesn't work. The detrgent tank is full, and the detergent hose isn't blocked at the intake end - you can easily blow through the filter/trap. The pressure side works fine. Cheers, Nic
... Pressure Washers
Re:dishwasher My dishwasher was working perfect. Now, everytime the cycle is done, the detergent door is open but the detergent is sitting right there. I was using the electrosol gel pack which was working great. Now, the gel pack is sitting there when i open it. On the bottom is of the dishwasher is a lot of sand-like particles. I clean this out everytime. I haven't changed anything and am wondering why, all of a sudden, it stopped working. I've had this less than a year. Thanks.
Ginga, first of all it's still under warranty so I would call for service. Here's a few things to consider; first, I would switch back to the powdered detergent like Cascade. You want to make sure that the water entering the dishwasher is at least 12 ... Kenmore 24 in. 16182 / 16189 Built-in Dishwasher
Hi, I've got a dw 681es wh nemo dishwasher. I turn it on, it starts working but it sounds funny....and nothing happens. after a while the start/reset button flashes and then it doesnt continue. Any clues? I start it on the quick wash cycle but it quickly flicks to the rinse cycle when this problem occurs. I used to just reset and it worked again but now it just wont work.
... Fisher and Paykel Dishwashers
I have Karcher 520m and when you press the trigger you can hear what sounds like a relay engaging but there is no water pressure, then it will fire up and work, but next time you press the trigger the same thing happens, I have been using it on harvested water, but even connected to the mains it does the same thing. Its now got to the stage it doesnt want to work at all.
The issue you are having is with the unloader valve in the pump. Now with the 520m it is a little bit harder to repair than with more gasoline powered pressure washers but it can still be done. It would be easier if I could just send you a email of t ... Karcher 1750 Psi Elec Pressure Washer
Stopped Working Hi, My Zanussi Aquapulse Dishwasher (DE6744S)has just stopped working. The red on/off switch still lights up when I try to start off a wash but nothing else happens. I know this is probably just a case of "call out a repair guy" but, even though I've had the machine a few years, I'm I bit miffed on the thought of coughing-up to have the thing repaired because I very rarely use it. Any suggestions? Many thanks
The problem is with the PCB, this is the board behind the buttons, you can buy this for £120 or you can get it fixed by QEA for about £45 link below. I am not an engineer but I replaced mine in 10 minutes.\015\012 ... Zanussi 24 in. DE6744S Free-standing Dishwasher
My Maytag dishwasher is 9 years old-- Model number MDB7100AWW, serial number 27754072ZQ It has worked fine until about a month ago, when I began noticing a kind of "scum" on the silverware and some of the dishes after completing a wash cycle. The top rack will squeak and have some resistance when pulled out, whereas before it always came out smoothly. I have always used powdered Cascade. I've tried using less, thinking I might be putting too much in. Then I got a rinse agent. These thin
We had the same problrms, and then the machine wouldn't even clean anything, we took apart the lower spinner and cleaned the plastic filters and now it works like new ... Maytag Dishwashers
I have a Briggs & Stratton Pro 3400 pressure washer that I got new last year and used for maybe 5 hours and it worked great. Have had it stored since then with stabilizer in the gas (I didn't run it dry) and now it won't run for more than a minute or two without dying. A dealer said it was probably bad gas and I now know that even with the stabilizer I should have run it dry last year before storing. Everything is like brand-new including plug and air filter so it must be the gas/carberator gunk
... Briggs & Stratton Prosumer 20324 Gas Pressure Washer
I have the two drawer model dish-drawer system. In the past the top seal leaked and since has been replaced with a new seal. Worked well for several years after but then the top drawer quit running. So we started to use the bottom drawer. That was fine for awhile althought it would pump waste water into the top drawer. Now neither drawer will work. The bottom drawer starts up and shuts down. I pulled the lower drawer and it is dry.
If your model has got an LCD display are you able to record what shows up on the display when the bottom drawer shuts down. If no display then are you able to note down the LEDs which are on inside the top of the drawer lid. It is likely there is no ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
My Hotpoint dishwasher won't fill with water. I have not used it for quite a while and last time I've used it (about a year or two ago) it worked fine.
Hotpoint dishwasher dont fill with water ... Hotpoint 24 in. HDA2000Z Built-in Dishwasher
Wash motor My dishwasher was working fine but the timer went out. It has sat there for about 1 year and I have now replaced it. It now cycles through but no water ever comes out to wash. I had an different dishwasher that we use to have at a lake house that would sit there over the winter and all I had to do was reach underneath and spin the little finned wheel and it would work....is there something like this on a DRU141 model? I just have a hard time believing that it is that when everything w
When a dishwasher doesn't get used, the gunk under the float switch dries up. Get that thing moving again, and you'll be back in business! ... Viking 24 in. Professional Series VUD141 (Ultra-Premium) Built-in Dishwasher
I have a neff dishwasher that is maybe 5 years old. im pretty sure there is nothing wrong with it as it was working perfectly fine before i had a plumbing problem a few days ago. after the plumbing problem was fixed the dishwasher doesnt seem to want to fill any longer. it sounds like it wants to work but its just not filling and going thru the cycle. does it just need to be reset or something? im not sure of the model number as ive misplaced the directions for it. could you please help? by the
Look for the connection from the valve to the inlet of diswasher. Check the hot water valve to be on. It is probably closed when anyone working on the plumping. Good luck. ... Neff 24 in. S5443X2 Built-in Dishwasher
Washer wasnt use in over a year when i started using it it work ok not to much power though and then it increased power and then starting blowing alot of black smoke from exhaust. when i tried to start it again after putting new gas it starting back firing and then would shut off.
... Karcher 2500 PSI Pressure Washer
I have a linea dishwasher model LDW 3SS i think it is about 3 years old , it used to start but not complete the cycle just stop halfway and then would only work if you slammed the door or pushed front of machine and now it wont work at all ???
Even though this is an old issue, I thought it would be good to close out.\015\012\015\012I had the same issue where the dishwasher would stop at two certain point in the program. If I'd manually advance past that point, it would keep goi ... Dishwashers
I just bought a used LG LDS 5811ST stainless steel built in dishwasher. The previous owner said he bought it 4 years ago. It's in great shape but doesn't work. It powers up but the water is not pumping into the dishwasher. The previous owner said that he thought it was the pump. He said he took it apart once and cleaned a bunch of crud out of some hoses and it worked for a while then started making funny noise and stopped. When i got it home i powered it up and connected water hose. It seems to
Rom the Service Manual:"1E INLET ERROR Not reached to the normal water level in spite of 10 min. water supply.The Hall sensor is OK?Check the frequency of Inlet Water by the Test Mode." ... Dishwashers