Having problems with your Dishwashers ?

My Maytag Quiet Series 300 light is blinking 5 times by the lock button. It won't do anything else other than blink 5 times if any other button is hit. Help!!


Answers :

When Control Lock is lit, all buttons are disabled. If you press
\015\012any pad while your dishwasher is locked, the light flashes
\015\0125 times. The dishwasher door can be opened while the
\015\012controls are locked.

To turn off Lock, press and hold Heated Dry for at least
\015\0123 seconds.

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Maytag Quiet Series 300 light is blinking 5 times by the lock button. It won't do anything else other than blink 5 times if any other button is hit. Help!!


When Control Lock is lit, all buttons are disabled. If you press\015\012any pad while your dishwasher is locked, the light flashes\015\0125 times. The dishwasher door can be opened while the\015\012controls are locked.To ... Dishwashers

Whirlpool Quiet Partner II model DU1145XTPS7 normal light repeating continuously. Then Cancel light started blinking too, at the same time after I tried sequences suggested in earlier posts. Do I try sequences with door open or closed? How many times do you press buttons? Please help! Thank you.


... Dishwashers

My dishwasher Whirlpool Gold Quiet Partner IV seems stuck. 2 of its buttons "rinse only" and "soak/scour" are blinking and it'snot doing anything else. Please help! Thanks.


... Whirlpool Dishwashers

I have a magtag quiet 100 series that has a broken handle but still shuts tight and seems to lock yet. Problem seems to be that the rinse only light will stay on for quite a long time and won't let me hit the wash button. When the rinse only light does go off, if I hit the wash button it starts but then switches to rinse only. Sometimes I can get lucky and get it to stay on wash after the rinse button is off for some time. Any suggestions?


... Maytag 24 in. DWD1500A Built-in Dishwasher

I have a Whirlpool Quiet Partner 2 and it simply won't start. The little GREEN light about the CLEAN button is blinking 7 times and then pauses. Then it blinks 7 times. Then pauses. It does this over and over.


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. If the clean light flashes 7 times, pauses, and then repeats. When\015\012the dishwasher doesn't sense a ... Whirlpool Dishwashers

I have a whirlpool gold quiet partner III. The cancel drain button works but nothing else. If you press any of the button for a period of time the normal button flashes; nothing happens though. Any thoughts????


Try to reset the dishwasher by using this sequence of keys within 6-8 secs.\015\012\015\012HiTemp/ heat Dry/ Hi Temp/ heat Dry/ Hi Temp / Heat dry.\015\012\015\012If it works all lights should turn on. Press Cancel to exit. ... Whirlpool GU2400XTP Built-in Dishwasher

Viking dishwasher M# DFUD142-PSS drains a little bit only then starts refilling, start button is blinking. When pressing the 2 buttons to drain have to press several times until responding then it drains just fine, also no push button light is on when pressing for drain. After doing all this machine worked fine for one wash only, then the same problem again after the wash cycle the water stays in the machine. Please help, thank you


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. Dishwasher not draining properly or not draining at all issues\015\012can arise due to different reasons ... Dishwashers

I have a Maytag Quiet Series 100 dishwasher. There is an icon with a "3" in it just to the left of "heat dry." I just noticed this "3" light is on and the dishwasher won't start when I push the "start/cancel" button. All that happens is the "3" light flashes when you push any of the other buttons, but it won't do anything else. Any help you can give me would be greatly appreciated. Thank you.


The "3" means hold for 3 seconds to child proof it. When it's on, none of the functions work. When you hold it again for 3 seconds, it turns off and your buttons will work again.\015\012Good luck! ... Dishwashers

Maytag dishwasher. The clean light stays on solid until I press any button then it blinks for several times then goes solid again. None of the other buttons light up when pressed. I unplugged it for over an hour to try to reset it but that did not help.


... Maytag MDB9600A Jetclean II Built-in Dishwasher

Dishwasher malfunction I have a Kenmore Ultra Wash Quiet Guard 3 dishwasher. One day, I found it with a blinking green ?clean? light. I went online to search for the manual, almost impossible to locate. Found a website where another using said to hit a 4 button sequence of ?heated dry? ?normal wash? ?heated dry? and normal wash. After this sequence, all lights went on and something that looked almost like a ?demo? sequence began (not sure now what that was). I hit ?cancel/drain? and it proceeded


Hi,The flashing light indicates that the control did not sense a 3 degree temperature rise with an 8 minute test. There are many reasons this could happen with a working heater. I put together a page that shows the reasons and you might b ... Kenmore 24 in. 15689 Built-in Dishwasher

Hobart lx18h Our commercial Hobart dishwaser stops working after running a few cycles. After pressing start the LED display will continually blink and nothing will happen. We'll turn it off and on again a few times to reset it and it will start up again eventually. We've had an appliance guy look at it multiple times. He's replaced a part or two for it but the problem continues and he isn't much help. Anyone else had any similar issues with this model of dishwasher?


... Dishwashers

Dishwasher stops at mid cycle. Starts blinking for 7 consecutive times stops and starts blinking again. A technician came and showed me how to reset by pushing different buttons and it will start again but only to stop once again. Please help. Email me at [email protected] Thank you Kitchen Aid KUDSO1FLSS6


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Control Panel won't let me hit the start button. The dishwasher is a little over a year old and is used at most once a week. The blue light on the bottom right of the dishwasher seems to no longer light up. The control panel will let me select the wash, but the start button and time indicator does not light up. Not sure if this a real defect and if just a simple exchange of the front control panel will fix the problem? Already tried resetting the circuit breaker and that did not help. Than


... Dacor Epicure ED24 Stainless Steel Builtin Dishwasher

Maytag Quiet Series 800 dishwasher won't start. The only button that I can get to work is pressing and holding the locking feature--that light eventually comes on. A couple of times I came back in an hour or so or the next morning and hit the start button and it started right up. Now it won't start at all. VERY FRUSTRATING!


... Maytag 24 in. MDB6100A Built-in Dishwasher

Normal light blinking on whirlpool quiet partner one


... Dishwashers

I have a Whirlpool GU2700XTSB1 dushwasher. It stopped one day and cleanning light was blinking. I was able to reset the dishwasher by pressing two of the button 3 times. Now when I run the dishwasher it fills the bottom with water, heats the water and then buzzes. The wash motor does not spin. Any help?


... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

Whirpool GU2500XTPTO type 575-0 quiet partner III will not begin new cycle, Pots & Pans light blinking, normal cycle solid green and the time remaining button has two green dashes. How do I reset the keypad, or is this anyotehr problem?


Turn off the power at the power box / for 5 min . reset the fuse and try again , this corrects some program problems . and if it does not the prog board will need replacement .. mm ... Dishwashers

Cannot find my manual for my Whirlpool Quiet Partner II. It stopped shortly after the beginning of a wash cycle, the clean button is blinking, and nothing I have attempted has helped.


Hi.There are several models that are part of the Quiet Partner II series.Please click here and check if this user manual applies. ... Whirlpool GU2400XTP Built-in Dishwasher

Have whirlpool gold dishwasher made in Mexico, the control lock light stays on, when i push it and hold it just blinks three times and then stays on steady and then does the same over and over, before it did this I noticed the lights for different cycles flashing randomly, and even pushing cancel button once in a while would start the machine up....I have tried to unplug the machine and then plug back in, but nothing is helping....any ideas??


... Whirlpool Dishwashers

I have a Kitchenaid 9741068h whisper quiet. It fills heats and then the cancel light starts to flash. it sounds like it wants to start but will not kick over. I can hit cancel a couple of times and it will work after several attemps. any help out there?


... KitchenAid 24 in. KUDI01ILBS Stainless Steel Built-in Dishwasher

I have a GE dishwasher model number GLD55OOLOOWW. It was starting a start cycle and i opened the door to put more dishes in and my finger must have hit a button on the door and now two lights flash off and on and it wont reset itself. It has been on for several hours and still blinking and beeping every so often and unplugging it does not help. Any suggestions how to solve this problem. Thank you.


Try pressing the cancel button ... Dishwashers

I have a maytag quiet series 300. When it is done with any of the cycles in leaves about 1-2 inches of water in the bottom of the dishwasher. I can manually hit the start button twice and it will go through a 2 minute cycle and pump out the water. I have cleaned the filter inside the dishwasher where it drains and have checked the hose to the disposal and it pumps out fine. It just doen't pump itself at the end of the cycle. HELP!


Here it is - Maytag Quiet Series 300 Manual ... Maytag Dishwashers

I have a Kenmore Quietguard Standard model 587 Dishwasher. It's about 3 years old. Lately, it has been running fine through the first hour and then towards the end, it will pause and the "Hi Temp" and "Heat Dry" like will start blinking at the same time. It's like it is stalled. When this happens, I open up the door and look at the bottom of the dishwasher were the screen is, and I see there is standing water. I press the "Start/Cancel" button to help it drain all the way, which it does, but th


Hi,My take on that would be a bad heating element....the dishwasher is looking for the heat from it and that never happens....so it goes no further and gives the alarm....I would get someone to check that heating element out and replace i ... Kenmore Dishwashers

We have a GE Profile Performance Triton Tri-Clean Wash System Quiet Power III built in dish washer. Our grandkids were playing with the button pad on the front panel and now it won't start and the "drying" light blinks. HELP!!


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. If you have already tried\015\012to reset it by pressing start/reset button and then pressing these buttons in\ ... Dishwashers

Kenmore ultra wash quiet guard dishwasher, the pots and pans and the normal wash button are blinking. The start and cancel and smart wash out tons have a faint light glowing. Thoughts? I tried the sequence of pressing heated dry, normal wash, heated dry, normal wash and that did nothing. I've flipped the breaker too. I was in process of taking it apart to clean filter, thinking that would help, but lost my manual and now I can't get that off to flea either:(. Sig


... Kenmore 24 in. 15689 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1274 seconds