Having problems with your Dishwashers ?

Dishlex Global 300. Eco light flashing and nothing happens.

\015 Dishlex Global 300. At startup, motor or pump sounds like it's running and Eco light is flashing. No water is entering the unit and I've checked all filters including at water supply. Only way to turn off is at the power point. I've tried holding the buttons in but no luck.\015

Answers :

Could be the water inlet valve or solenoid
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishlex Global 300. Eco light flashing and nothing happens.


Could be the water inlet valve or solenoid ... Dishwashers

Dishlex Global 300 the Economy light is flashing and the machine seems to be on but nothing is happening? Thanks Robert.


Check for leaks or the drain pump may be faulty ... Dishwashers

I have a dishlex global 300 on which I removed the front cover a black wire came loose and I didn't know where it came from thanks to jyackle5 I have fixed that issue. The problem I have now is the eco light flashes and that's it (nothing else functions). I removed the front panel as the bottom door seal had blown and junk oosed behind the front panels I washed the junk out and cleaned the hole washer while I was at it the bottom of the washer (where the heating element is) over filled so I tipp


Easy fix, Use a bit of force and pull the dishwasher out.Get a few towels and tilt to the left. Water will drain out. Push back in. wait 10 mins and turn on.\015\012\015\012\015\012\015\012Regards ... Dishwashers

Hi have a Dishlex Global 450 dishwasher which stops after about 15 minutes into the cycle. The is nothing flashing and no lights it just go off totally. There is water in the bottom of the dishwasher. help please


... Dishwashers

Dishlex Global 310. Any cycle I run starts...drains the water, fills up the bottom of the dishwasher... then it stops and the "fast" light is flashing. I've tried every cycle but the same thing happens. Can you please tell me what the problem is? Thanks


... Dishwashers

Dishlex Global 2000 starts makes a constant noise tries to start up then stops. Bit of water in the bottom of the dishwasher. Lights flash but does nothing


Have you checked that your outlet pipe is not blocked. if it is blocked machines are designed to stop to prevent flooding. this may explain why there is water in bottom ... Dishwashers

Dishlex Global 300 not pump out after rinse. Rinse light flashing


... Electrolux Dishwashers

Dishlex global 300. ECO light flashing.


If that fails then try emptying the over flow try found behind the kick panel below the door. 2 phillips screws will be found either side under plastic screw covers, behind kick panel you will find the cover for all internals remove a total of 6 scre ... Dishwashers

Lights on Dishwasher light up but nothing happens. When I reset power it lights up the high temp and sanitize button light up and LED displays PF. After I open the door they stop flashing. the far left five buttons light up when I push them and a corresponding number displays on the LED screen. the only lights that do not come on are the Delay button and power button. Don't know if they are working or just don't light up. No matter what lights up the unit does not turn on....:( ? help can't fin


Pf is power failure\015\012 your loosing voltage to the unit \015\012it may just be the door switch or it could be in the control\015\012 try starting the unit but keep your hand on the unit pushing the door in place,, its not a g ... Electrolux 24 in. EDW5500DSS Stainless Steel Built-in Dishwasher

Brand new, never used dishwasher. When I touch/press on the circle to select a function nothing happens. The PF (power failure) light keeps flashing & when I press clear/drain nothing happens. Won't allow me to select any other function.


... Frigidaire FGBD2451KF 24 in Builtin Dishwasher

Maytag mdb6601aww push normal wash button-- nothing happens. push other wash cycles, the lights flash about 30 times then stop-- then nothing happens. tried clearing codes. hi temp wash then heated dry , hi temp wash then heated dry. same problem. also tried normal wash then heated dry 3 times in 6 seconds--- same thing. also tried unplugging unit waiting 10 minutes with no luck. thanks


... Maytag 24 in. MDB6100A Built-in Dishwasher

My Dishlex global 300's rinse light is flashing after 5 mins use. About 2 inches of water stays at the bottom of the washer. Bought this second hand and it has not been used for a few months. Do I need to fill the reservoir under the washer or lean it at 45 degrees to dislodge anything in the sump. If you have had the problem of the washer starting its program and then stopping after 5 minutes and the rinse light flashing I would appreciate your advice. Cheers Hyph


The flashing rinse light is an error code. I am assuming that your control board is good because the lights are working. I'm also assuming that this model has two pumps. One for filling and one for draining. The rinse light flashing is probably i ... Dishwashers

Dishlex global 300 flashing eco light. i took the front of to fix broken handle while dishwasher was still plugged in. blew circuit breaker in house and now only the light labelled 'eco' flashes and no buttons respond. have I stuffed it?


I have a ge dishwasher that wont let water out like its supposed to. this morning i got up to water on the floor and water still in the bottom of the chamber what do i do to solve this problem ... Dishwashers

I have a Ariston l64 dishwasher, the cycle starts normal yet after draining the water two lights come up flashing and nothing happens afterwards. The 3hr and 9hr lights are flashing


... Ariston Technologies L63 Free-Standing Dishwasher

Ariston afa250 green light is flashing and nothing else happening it has only done a rinse then light came on flashing


... Dishwashers

I have a frididaire proffesional series aquasurge with speed clean dishwasher # PLD4375RFC3 dishwasher there is an Er code that just keeps flashing the china/crystal light is flashing as well as the low rinse light. it used to sound like it was running when you would close the door but nothing was happening inside. any ideas?


... Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher

FDB834RFS0 Six lights flashing at about 1 second intervals but nothing happens other than the flashing lights


... Frigidaire 24 in. FDBB840DC Stainless Steel Built-in Dishwasher

The eco light is flashing constantly on my Dishlex Global 300 dishwasher, it is making a noise like a pump is running continously, but the unit will not operate. Can you give me some possible faults and solutions. Regards Dave I have the same problem. The Eco light flashes and there is some sort of noise, not sure if it is a pump or a solenoid, but thats as far as it goes. A friend gave me the machine after aservice tech told him the main washer motor was gone. i have fitted a new motor, but


Its an overflow of water into the base of the machine.There is a float switch in the base of the machine in a small plastic dish.There is a metal cover with 2 small bolts that have to be removed to get to it.get the overflow c ... Dishwashers

I have a kenmore dishwasher model 66515832000 and it starts to do the cycle and about 10 seconds into it it stops and the quick rinse light starts flashing, it wont cancel or let anything else happen. if you open it and shut it , the light just flashes and nothing will work.


... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

Kenmore Ultra Wash Dishwasher Model 665.15779 LOCK ON light blinking on control panel, unable to use washer. If buttons were locked, LOCK ON light should be lit continually not flashing. If you press and hold NO HEAT DRY button to disengage lock, nothing happens. If you press the CANCEL button it begins to blink in unison with the LOCK ON light. How can I stop the light from blinking to allow button function again?


... Kenmore Dishwashers

Dishlex global 300 pot light flashes


... Hotpoint 24 in. DF55 Free-standing Dishwasher

Dishlex global 300.... The normal light starts flashing mid wash


I think it means the water heater in the dishwasher is not working,or the element is shot.\015\012my 300 had a burning smell before the light started flashing. ... Electrolux Dishwashers

After selecting a program, the dishwasher beeps for a while and the 3 buttons on the left flash too. Program wont start, water wont fill and nothing happens. THe lights keep flashing but the beeps stop for about 30 secon ds then start again. Help me Please.


Basically the dishwasher is telling you there is a fault - Not so useful I know! Plug out the machine and leave it for five minutes and see will it reset. If that does not work, you will need to reset it manually. To do this consult the manual. If yo ... Hotpoint 18 in. DC28 Slim-Line Built-in Dishwasher

Dishlex global 300 pots light is flashing while mormal light is on during cycle


... Dishwashers

Indesit idn 40 not working,light 1 and 3 flashing or light 2 green constant but nothing happening. water standing at bottom of the unit can't drain.


... Indesit 18 in. D41 Slim-Line Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1281 seconds