Having problems with your Dishwashers ?

The dishwasher won't turn on. It sings its little song and flashes error code that looks like an upside down and backwards F and an E. what's it telling me?


Answers :

Those are not common error codes. Try disconnecting the power to the unit by turning off the breaker in your panel box and then reenergize and see what happens.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The dishwasher won't turn on. It sings its little song and flashes error code that looks like an upside down and backwards F and an E. what's it telling me?


Those are not common error codes. Try disconnecting the power to the unit by turning off the breaker in your panel box and then reenergize and see what happens. ... Dishwashers

Flashing error codes that look like RO4 and RO8, not A04 or A08


... Indesit Dishwashers

We have a Kenwood KDW8ST2A Dishwasher which is about a month old. The other day we had to pull it out from under the worktop because something rolled under it. When we put it back and went to use it later that day, we got an E1 error code appear and it's been like that since. We pulled it back out to make sure that we hadn't accidently pulled or loosened any of the pipes. We have the manual which does tell us what the error means but it doesn't tell us how to fix it. I'm sure it must be somethin


You can find a manual here ... Dishwashers

We were hit by lighting and now my dishwasher top blinks from the minutes to an error code that look like a 118 but i don't see an error code in the book for that. It is a two drawer model


When lightning hits an appliance it hits toward least resistance, you need to replace the board in your dishwasher. ... Dishwashers

Code F2 I just replaced the door switch on an inoperable DD-602. My top drawer was working fine, but my bottom one has been offline for a while (door switch failed and I never got around to fixing it since I had the top). Well, my top finally failed too so I replaced both switches. Looks like everything is good on the top, but my bottom is erroring with an F2 code now. Kindof makes a thumping noise as it starts the cycle -- maybe 3-5 short thumps and then a 10 second delay, repeats. Any ideas? C


F2= \015\012The motor has not\015\012been sensed rotating\015\012\003 Foreign object has jammed the rotor\015\012\003 The rotor has failed\015\012\003 The hall sensor has failed\015\012\003 The electronic controller has ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fisher & Paykel DD603 Error code F2. My top dish draw is showing the error F2 , I have taken out the baskets, spray arm, propellors. The metal shaft is completley frozen, I can't move it at all. I see other posts say to wiggle it to free it but that doesn't work here. Can I get a copy of the service manual too? We are along way from a repair man to come look and I like to try myself before spending more money on it. My e-mail is [email protected] Thanks.


... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

Hi, i have an Indesit Di620 dishwasher which is displaying an error. The error code is lights 2 and 3 flashing. Can anybody tell me the area I should be looking to solve this please? Thanks


... Indesit DF125 24 in. Built-in Dishwasher

My dishwasher will not drain. it goes through the first 10 minutes of a program then i get the OE error code. i have checked my hose for kink or clogged-there is none, i have made sure it was level. i would like to get the filter off but it looks like i would have to take the drain pump out from the bottom to check if any thing is plugging it. was just wondering if anyone has any tips that would help. thanx


1)check the drain pump working\015\0122)check any block from drain pump to drain hose. ... LG LDF6810 Built-in Dishwasher

Hi My fdw70 dishwasher blew and smoke started coming out > I replaced the fuse and it was fine for a couple of cycles and now keeps coming up with the A10 error code . what part shall I change where is it and what does it look like > Cheers James


... Dishwashers

Maidaid halcyon evolustion 510 telling me 04 error code. whats this?


... Dishwashers

Teka dw6 55 FI, error codes 1-34---- flash contantly and you get 10 beeps it looks like its not draining is it the pump or just blocked?


Its not draining ... Dishwashers

Reset code I recently had a problem with my dishwasher that required me to use a reset code on my control panel. I can no longer find the manual that tells me that code. I was wondering if anyone knows it as to save a tech call. The error occurs when the clean light flashes. We have checked the heating element and the tech told us there is no problem there, we just need to reset the machine. The error has occured again, but this time because I tried to run the machine right when we came home fro


I believe the reset sequence is accomplished by pushing the NORMAL WASH then HEATED DRY buttons in that sequence two to three times. The unit will enter diagnostics mode, but can be stopped by pressing the CANCEL button. Let me know if this helps. ... Whirlpool 24 in. DU1050SS Built-in Dishwasher

I have a NVDE12W NOUVEAU dishwasher only a year old and it stops working midcycle with a error code E3. However I don't have a manual to know what this means? Its happened a few times and now I think it maybe stuffed? Can anyone tell me what this error code means?


Hi\015\012\015\012Thanks for using FixYa. E3 error means that the water heater element does\015\012not work properly or the filter mesh is blocked. You'll need to clean the\015\012filter mesh; if still the issue is not resolved t ... Dishwashers

Intermittent problem with error code E 01, which tells me there is a leak. However, I have turned the dishwasher on its side and back and am certain that the pan is empty. Indicates a false error code or sensor. How do I fix that or disable it?


... Electrolux 24 in. EDW5500DSS Stainless Steel Built-in Dishwasher

Error code I keep getting an error code R02 on my Indesit DE 73 dishwasher, can anyone tell me what this means


... Indesit 24 in. DE73 Evolution Free-standing Dishwasher

I have a Bosch SHU5316UC dishwasher. The last two times it ran, my wife says the display said "CL" (for clean) after running through the cycle, but she heard a "motor running" until she opened the dishwasher. Attempting to run the dishwasher tonight, it won't start - it displays a "P" (error code?) when you attempt to start it. Can you tell me what the error code P is? Thanks, Dave


P stands for program in computer algorthms. The device displays program whenver chages were made to the default settings. A powered on devices least has malfunction only requires reseting to attaon default features. Depending on the type of device, r ... Bosch SHU5316UC Dishwasher

Could you please tell me what error code 8


... Dishwashers

I have an LG Model 4324W Dishwasher. It is displaying the Cd error code and not finishing the cycle. The manual does not mention this code. Could you tell me what is wrong? Many thanks.


... LG Dishwashers

I need an error code description.I've got a A1 error and i would like to find out what is that mean..


... Electrolux 504200 Builtin Dishwasher

Dishwasher does not water to come go past inlet solenoid. I have checked pressure to value and it is good. Looking for part but having problem accessing parts store. when we turn on dishwasher it sounds like it is starting but there is no rush of water sound at the vent going to the garbage disposal like it used to. And then it errors out/stops.


... EuroTech 23 in. EDW254E Built-in Dishwasher

I just installed a new Frigidaire dishwasher. Took it through 1 cycle as the directions indicate looking for leaks. I now have it full of dishes for its maiden voyage, and I get an Er uo code. Cannot find this error code anywhere. Can someone help me. M# FGHD2433KW Jamie


This is a vent problem you need to check the vent motor and make sure tha the wire have not been pinched by the door spring and make sure it is connected properly.the vent should be located on the top or possibly the right side of the cabinet. ... Dishwashers

HE error My LG LD-14aw1 is showing HE error code - Heater Circuit is troubled???. (Not as much as owner!!!). I have repaired several dry solder joints in the control module, which have been causing various operating failures, but the HE problem has got me stumped. Can anyone provide me with a wiring diagram of the machine and or the control module? I'd like to trace the heater circuit to see if I can find the fault. Many thanks


From the manual: Errors: HE: Heater circuit failure.Please call your Authorized Service Center or LGECustomer Service at 1-800-243-0000(US), 1-888-542-2623(Canada). ... LG 24 in. LD-12BW5 Free-standing Dishwasher

Error "HO" Dishwasher shows error code "HO" and is very loud with what sounds like a small lawn mower motor running while the message flashs.


If your hot water isn’t hot enough it will display “HO” while heating the water to operating temperature.Thank You HuumPlease remember to leave a solved rating before you sign off! ... Dishwashers

Just fitted a new circuit control board for my indesit di62, the test cicle started and ran until finished. I heard two beebs to tell me cicle had finished but when I looked at the program selector the second and third lights were flashing. Had a chat on the forum and it mentions about draining off a flood tray but not sure how this is done so looking to confirm that this is the error message and how to correct it. thanks Dave.


Leave outlet hose flat down ground level ... Dishwashers

My Samsung DMR57 Dishwasher gives me error code 9e, telling me its a low water level error. Anyone know what this is and how to fix it ?


Our unit started displaying code 9E after filling, draining and filling again. At the beginning it was enough just to restart it. Finally this trick didn't work anymore. Before calling service for out of warranty I decided to take the unit out of the ... Samsung DMR77LHS Tall Tub Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0756 seconds