Having problems with your Dishwashers ?

My hotpoint aqarius dc26 dishwasher has stopped

\015 My hotpoint aquarius dc26 dishwasher has stopped working, it is 8 years old. When you start any of the cycles the pump starts but no water comes through to start the wash.\015

Answers :

This may be caused by a leak your dishwasher as a build in anti flood switch which stops water from entering when it leaks into the base of dishwasher . You may be able to check this for yourself by unplugging your dishwasher and slowly pulling it out and lean it back if water runs on to your floor you have had a leak .if at this point you turn it back on it might start to fill again .if it does start to fill turn it off again . it will need further examination to see why it leaking .if you feel you can't do this call your local engineer .
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My hotpoint aqarius dc26 dishwasher has stopped


This may be caused by a leak your dishwasher as a build in anti flood switch which stops water from entering when it leaks into the base of dishwasher . You may be able to check this for yourself by unplugging your dishwasher and slowly pulling it o ... Dishwashers

Dishwasher Hotpoint LFT114 - The dishwasher does not finish it's cycle. Two of the settings lights flash when dishwasher has stopped.


... Hotpoint Dishwashers

We have a hotpoint aqaurius dishwasher df23n. When put on wash 4, the timer stops half way through and has to be helped. When the programme then continues through the rinse cycle, it stops half way through. I have tested the water heater and thermostat electrically and they seem ok. Is there anyting else that stops the timer at these positions? The timer knob is free to turn and is not jamming? Steve B


... Hotpoint Dishwashers

Dishwasher issues hotpoint dishwasher model HDA1200 used for a year and put into storage for a year. reinstalled this weekend. dishwasher was fussy about the door latch for a minute...door latch did not want to engage all the way...but went into its cycle. we stopped it and added a few dishes for a test run it started right up and ran about 8 minutes and shut itself down. it will not restart. the power supply is ok. no leakage about the door once latch engaged. what can we do?


It can be the 10A fuse located in the back of the machine. but.... storage is kind of a problem with determining what is wrong with it.\015\012Mouse can have chewed the wires, moisture can have rusted or corroded some components.\015\012C ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Our Hotpoint Dishwasher Model HDA200X-73BA has two little white plastic pipe stubs poking out of the bottom of the dishwasher. During one of the cycles--(I don't think it is the drain cycle)-- some water is being released from one of these pipe stubs and then it stops and the other one runs some water. They each only run for a few seconds, but the water is just running on the floor. These little pipe stubs are about one half inch in diameter and project out of the bottom of the dishwasher about


Hello. go to the sears direct website, click on the blue link below, and enter your model number. ou can then access an excellent parts diagram which will show these stubs and what may be missing from them. Joe\015\012\015\012 ... Hotpoint Dishwashers

My Hotpoint FDW60 has stopped cleaning the dishes & the glasses are all cloudy, the poder doesn't dissolve & leaving a horrid residue on everythinh. Have always cleaned dishwasher on a reg


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Hotpoint Dishwasher BFI620 eco LED flashing and cycle has stopped


... Hotpoint 23 in. BFI62 Built-in Dishwasher

Hotpoint Dishwasher FDW60 stops part way through cycle and flashes on Eco 45 and Fast 40


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Hotpoint sdd910 Hotpoint dishwasher stops working error A 8 or A 10 flashes on the display. Any ideas wht this might be


... Dishwashers

Hotpoint BC145 Dishwasher not cleaning starts to kick in but then just sticks on the "R" light flashing and cannot reset even after turning off. Itbeeps when pressing the select button sound weaker and shorter than they used to and the light does not move from the "R". On a couple of times I have tried it has reset and then the dishwasher starts but after about 3 minutes there is a low beep(not the usual beep when a programme finishes) and the washer stops and the light is flashing on the "R" ag


... Hotpoint 18 in. BCI45 Slim-Line Built-in Dishwasher

My dishwasher just stopped working - Hotpoint 24 in. HDA3400G Built-in Dishwasher


... Hotpoint 24 in. HDA3400G Built-in Dishwasher

Hotpoint dishwasher BFV620 lights 2 and 4 flashing and will not complete a cycle. Dishwasher has been working ok but suddenly stopped and lights 2 and 4 flashing. Checked obvious blocked filter and kinked pipe etc,


... HP Dishwashers

My dishwasher is stopping through its cycle. I need the timer sequence chart for a hotpoint aquarius super plus df22 dishwasher


... Hotpoint Dishwashers

Hotpoint FDW60 Dishwasher stops and fast and delicate light flash


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

The rotary blades on my Hotpoint Dishwasher FDL70 have stopped rotating?


... Dishwashers

Hotpoint dishwasher LFT04 stopped working - help?!


... Dishwashers

Hotpoint bfi620 dishwasher Starts cycle then stops washing.


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

The door on my hotpoint dishwasher will not stop shut


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Hotpoint slimline dishwasher model dc26


... Hotpoint 18 in. DC26P Free-standing Dishwasher

I have a Hotpoint Dishwasher -Ultima FDW80 60cm. It keeps stopping midcycle and flashing AL 10. My manual does not state whtn the problem is. I have cleaned the filter and stocked up the salt. Help Please Lyn


\015\012I attempted to locate an answer to resolve the issue for you, but you have not provided me with enough information to access my service database. Please observe the TIP below, and post me back and I will be happy to assist you fur ... Dishwashers

Flashing lights I have a hotpoint dwf40p ser no ls12-ev03 it pumps fills then the wash light and the drying lights flash and dishwasher stops with no further progress


... Hotpoint 24 in. DWF32P Free-standing Dishwasher

Hotpoint aquarius dc26 dishwasher not heating or finishing program


... Hotpoint Dishwashers

Hotpoint dishwasher dw602bi cycle stopped with intermittant bleeping and all lights flashing. Tried switching off at mains. Will not work now. Help


... Dishwashers

My fdw60 hotpoint dishwasher seems to start then the fast light and the delicate light flash and it stops. Please help.


Have you tried cleaning out the filters in the base of the machine? Also make sure there is no bits in the filter sump. Then give it a clean using a dishwasher cleaner. ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

My Hotpoint dishwashers water stopped turning on. It has worked fine in the past but all of the sudden no water, just hot/dirty dishes.


Check that your float valve is not stuck in the upper position.This will stop water from entering machine.If it is not stuck( a utensil may be stuck under the float valve) then the float valve relay switch may be the problem The float valve is in the ... Hotpoint 24 in. HDA3400G Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1422 seconds