Having problems with your Dishwashers ?

When the cyle is complete the dishes are cold and wet and greasy ones not washed properly. I think it needs a new heater but the person who came out to look at it said it was because it is in my garage (?). I have always had my dishwasher in the garage and never had this problem. If it is the heater, is it an expensive repair or would I be better off buying new. I have a six year old Zanussi de6754


Answers :

At http://www.usersmanualguide.com/zanussi/dishwasher/de6754
\015\012you wil find the user manual, if the dish washer is instaled proper it does no mater where is putedn, if the dishes are cold it posibi to have a het element brocken or thermostat also can e amaged or only a wire. that person must ceck thoes things, and more than that this washer was orking in this place for few ears before. try to call another person to fix it. a serious man not a layzy. i repair professionall dishwasher and another equipments for restaurants and hotels and i look andmesure and after that i spock.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When the cyle is complete the dishes are cold and wet and greasy ones not washed properly. I think it needs a new heater but the person who came out to look at it said it was because it is in my garage (?). I have always had my dishwasher in the garage and never had this problem. If it is the heater, is it an expensive repair or would I be better off buying new. I have a six year old Zanussi de6754


At http://www.usersmanualguide.com/zanussi/dishwasher/de6754\015\012you wil find the user manual, if the dish washer is instaled proper it ... Dishwashers

We hav a aMaytag MJD 2000 AAW dishwashing machine displaying E3 which according to the manual means the water element does not work properly or th efilter mesh is blocked. The macine is not warming at all so we suspect the heater element is the problem. We where wondering how expensive this is to repair. Is it worth repairing or would buying a new appliance be a similar cost?


... Maytag Dishwashers

My electrolux 302 dishwasher does not seem to heat the water anymore, is it expensive to repair the heater


It can be the element is cheap enough but 9 times outta ten it,ll be a circuit board fault which can be exspensive. ... Electrolux Dishwashers

I HAVE ONE KELVINATOR ( KELLY ITALIA SPA) DISHWASHER SOME 20 YRS OLD, BUT BRAND NEW, NEVER USED. MOD: K15 3726800611 10 A 220V 50 HZ TOTAL POWER CO W 2050 WATER HEATER RESISTANCE W 1800 WASHING MOTOR DRAIN PUMP W 250 90 FRONT DOOR WAS OPENED FOR REPAIR AND NOW CANNOT FIX IT BACK. KINDLY SEND ME INSTRUCHTIONS WITH DRAWINGS. M. ZAFAR IQBAL 840 SHADMAN 1, LAHORE 54000, PAKISTAN email: [email protected]


... Kelvinator Dishwashers

I HAVE ONE KELVINATOR DISHWASHER SOME 20 YRS OLD, BUT BRAND NEW, NEVER USED. MOD: K15 3726800611 10 A 220V 50 HZ TOTAL POWER CO W 2050 WATER HEATER RESISTANCE W 1800 WASHING MOTOR DRAIN PUMP W 250 90 FRONT DOOR WAS OPENED FOR REPAIR AND NOW CANNOT FIX IT BACK. KINDLY SEND ME INSTRUCHTIONS WITH DRAWINGS. M. ZAFAR IQBAL 840 SHADMAN 1, LAHORE 54000, PAKISTAN email: [email protected]


... Kelvinator Dishwashers

Dishwasher is making a loud grinding noise when it's started. Doesn't matter the cycle choice; the cycle starts as normal then once started up starts making a sort of grinding noise as the water is pulsing, like something is stuck or blocking the "push" of water. I couldn't see anything stuck in the bottom - any thoughts before I call a repair person? I've never owned a dishwasher before - maybe there's a basic drain/blockage thing I should check out first? And, any recommendations for repair


... Maytag 24 in. MDBH970AW Built-in Dishwasher

I have a Kenmore 665.13873 Pro dishwasher about a little over 3 years old. I never know when the sosp dispenser is going to open and sometimes when it does open, the pack is still in tack and unused , even when I used the powder, it did the same thing. My glasses are always cloudly looking. I use the Cascade action packs. I have never been satisfied with this dishwasher although it is suppose to be top of the line. I paid a little over 1,300 for it. It is very quiet which I like, but I neve


... Kenmore Dishwashers

I have a SHU3032UC BOSH Dishwasher for a couple of years now. Always worked as expected. Latetly, the dishwasher never stops. It looks stuck on an "unknown cycle"... The cycle dial stays at the "bottom" cycle (there's nothing written). If I turn it 1-2 "clicks", the dishwasher continues its work and ultimatly finishes with very good cleaning results. Once, I open the dishwasher when it was stuck in the "bottom" position, and there was hot watter at the bottom. Here's what I've tried so


Hello, welcome to FixYa.\015\012\015\012Based on you description of the timer not advancing I suspect the thermostat isn't satisfied when heating the water.\015\012\015\012The SHU 30** unit`s with a mechanical timer have very few if any, issues with ... Dishwashers

Leaking from under dishwasher. Has run great since 1996. Under counter model in manufactured home. Chnaged to drop in pellet dishwasher detergent and it ran great. There is no water inside the dishwasher circular drain. We never use the heating coil to dry the dishes. We have turned off the water supply line under the sink to the dishwasher. Cool clear water is running out from under the bottom right corner. The hot water heater is right next to it and everything is dry and warm under it which i


Hi,Depending on the model you have this could be a couple of things. The most likely suspect is the water inlet valve. What I would recommend to do is take the bottom toe panel off, typically there are either 2 or 4 screws holding this pa ... Dishwashers

My son and daughter in law bought a new home with all ge appliances and the dishwasher is americana. the dishwasher from the start has never worked properly. the water is cold and the drying cycle doesn't heat up. also, it doesn't drain completely. I think that this dishwasher should be repaired or replaced free of charge.


I agree, especially if it is less than 1 year old. See if the builder of the house will make arrangements for repair or replacement under his guarantee. If not then try the store or company that supplied the dishwasher. If the appliance was registe ... Maytag Dishwasher

Extremely heavy limescale residue on all items after dishwasher has finished. water temp in house has been turned down. Had water tested by city water company and results were clear. 12 months ago maytag replaced heater element under recall, but dishwasher always seems too hot. Neighbours do not have this problem. Any advice would be most welcome.we only use quality powder and rinse aid. Have cleaned dishwasher numerous occasions. model MDB4651AWS1 SERIAL # NW5015848


Hi,The scum, film and white residueproblems have started since the reductionof phosphates in dishwasher detergents.Here is a tip that will help you to solve the problem of films, residue, and scum in your dish ... Maytag 24 in. MDB4651AWS Stainless Steel Built-in Dishwasher

We just bought a new Bosch dishwasher, I've never washed baby bottles in the dishwasher before, does anyone know if it is a "no-no" even in a Bosch? I have always thought that any baby bottle, (we use Dr. Browns), was not meant to go through the dishwasher, but I'm TIRED of hand washing them! Any experience/research with this? Many thanks!


Hi, I have now a 4 year old. My wife and I have always put the bottles in the dishwasher. It will be fine. ... Bosch 24 in. SHU43 Built-in Dishwasher

Dishwasher flood I have a whirlpool "Queit Partner I" type dishwasher. When I used it for the first time it flooded my kitchen floor. I had to stop in the middle of everything. What do I do from here. Not sure if I put in the correct detergent or if I put too much in. Never had one of these things before. I was always the dishwasher...help...I can be reached at [email protected] Thanks for your help.


... Dishwashers

I have a rheem electric 81v528 water heater. I drained it but there is still so much calcium residue I have to clean faucet filters around the house once a week. How do I get this sediment out of my water heater. I have never attempted any repair on a water heater so please be very elementary. Can I put Clr or limeaway in the tank to disolve? Thanks slecht


... Dishwashers

I have a dishwasher that hasn't been draining properly. For a while I could hit cancel drain cycle again and it would clear 1/2-1 of water out. But now that doesn't always do it. Someone told me to take filter out and see if it needs to be cleaned. Otherwise we have no other sink/plumbing problems with other kitchen areas. Please help! one handyman told me no use to work on dishwashers they are just throwaway with parts/service being so expensive.


The advise you recieved is correct. You will need to pull the unit out of the cabinet and disconnect the drain hose from the rear. Then remove the cover, There is a filter inside. If its clean then its time for a replacement unit. You could have a ... Whirlpool Dishwashers

The water in the dishwasher is always cold with no heat so a poor wash. Does the dishwasher have a built in heater element?


... Bosch 24 in. SGS43C02 Classixx Built-in Dishwasher

Dishwasher Repair Dishwasher is a Stoves/Newhome DW616 Rotating spray arms do not always operate. This is an intermittent problem - will sometimes work normally for a few days then arms will not move at all with no water coming from them. Machine appears to go through its normal cycle. Some times cycle starts normaly and spray arms stop working part way through.


It could be a motor or a pump issue. The dishwasher has a motor that attached to a pump which forces the water up into the sprayer arms and during the drain cycle, it pushes the water out of the dishwasher. \015\012The motor (and pump) located beneat ... Dishwashers

My dishwasher after the cycle is over still have a bit of dirty water remaining on the bottom. After few hours is getting more and more dirty water. I have a feeling that some kind of the valve is not working correctly which allows the water from the sink drain to come back? Am I right? Is it a big re[pair or marginal? My dishwasher is about 20 + years old and still the greates one I owned ( I had before Bosh ). I own the dishwaser for last 4 years but previous owner loved it and never repair


Hello Ma'am/Sir,\012 The Best thing you're going to do is to have new Dishwasher.A lot of brand new products can help you, rather than striving the old one...Hope it will help you! God Bless you...Thank you! ... Miele Dishwashers

I have a Kenmore dishwasher Model # 665.1376 which has always been a quiet unit. This dishwasher is about 4 years old. Now the dishes still come clean, however the cycles have a loud hum to each except for the dry cycle. Could this be a bearing in the motor, and if so how expensive is a new motor?


... Kenmore 13763 Stainless Steel Dishwasher

My dishwasher works except is does not appear to be getting water. David psr responded: Most likely the water valve is defective or stopped up with calcium deposits. In either event, you probably need to replace the water fill valve. Not a terribly expensive nor difficult job on most dishwashers. Do I call a plumber, appliance store repair department or look for a local handy man?


I agree that the fill valve may be bad or clogged. You can fairly easily remove the valve yourself if you are somewhat handy and then take it apart and clean it. I doubt if the old valve is electrically shot but it is possible. Cleaning it out may ... GE Dishwashers

LG model LDS5811WW/02 has never cleaned the dishes since first installation. Put clean dishes in and they will come out dirty too! Have tried all dishwasher soap types and brands and drying agents. Always scrape and rinse dishes prior to loading. Dishes loaded various ways but problem remains. Repairman says unit is working fine. Also never dries dishes completely. Often leaves soap dispenser completely or partially filled. We are on a farm and have hard water but we have a softener/iron remover


If the soap/detergent isn't completely rinsing out of dispenser, it sounds like water isn't directed the top spray-arm. possible a defective vario motor; as it directs water to the water channel that supplies water to the middle and upper spray arms. ... LG LDF8812 Stainless Steel Built-in Dishwasher

My dishwasher washes and drains ok but there is always about 2-3 cups of water that remain in the dishwasher after the cycle is complete. This water never drains out.


If the dish washerr is kept at a tilt, then it is possible that the pump never gets a chance to pump out. Use a good spirit level to set this right. If nott Please open your washer, open the outlet and check for any dirt accumulation, check to the pu ... Dishwashers

Maytag Dishwasher I would like to know the proper water level after DW fills. Older Whirlpool units a quick guide was when water just covered heater. I have a new D/W and the water supply is difficult to access, there is a kink in the water line slowing the water flow. The D/W fills to bottom of heater, but because the unit is so quiet I can't determine if it is timing out or working properly. I intend to repair water line when counter work is done. Thanks for any help Gary


Newer Maytags should fill close or up to the heater not over. Sounds like your alright for now but I would get that water line fixed. ... Maytag 24 in. MDB8951AWS Stainless Steel Built-in Dishwasher

My sound conditioned Whirlpool dishwasher is real old. It fills up completely with water. It looks like it will overflow, so I stop it. I thought it always started washing from the start. Do they always fill completely up with water, then start washing. I never noticed. I am afraid the water will overflow. Can it? Last time I ran this, it had a real loud motor. I used to hear the motor running from the start, but now I don't, just water filling up to what looks like overflow if I let it. I baile


... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

Dishwasher My dishwasher doesnt clean my dishes well lately. I rinse them off b4 putting them in. I dont overload and I dont cover the jets inside. It has always been good but even my silverware is coming out dirty when I clean them off b4 putting them in.Any suggestions on what to try? Its 10yrs old and never had a problem with it.


You may have debris clogging the suction for the wash motor. With a model number, I could tell you how. ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2240 seconds