Having problems with your Dishwashers ?

Can't find the over flow tray on my dishlex globale 300

\015 I have gone as far as tillting my washer backwards and removing the bottom gal plate and still can't see the the kidney shaped drip tray. I can see the water inlet soliniod the drain pump and the cycle pump can anyone help me from here\015

Answers :

Hi,
\015\012
\015\012The bottom base plate is the drip tray. The polystyrene float is for any overflow of water. This lifts up and activates a switch if your dishwasher has this option. You will also find the shape of the base directs all the water to this float switch. so when there is a water leak the unit switches off and doesn't flood your kitchen.
\015\012also there is an overflow pipe usually a plastic funnel or tube usually around the door hinge area. if excess suds are created in the cabinet from using too much detergent it spills into the base. if you have a water leak just check all the fittings inside the cabinet are tight as if they are loose water can leak out through these and then end up in the base.
\015\012
\015\012Hope this all helps
What make and model # do you have?

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Can't find the over flow tray on my dishlex globale 300


Hi,\015\012\015\012The bottom base plate is the drip tray. The polystyrene float is for any overflow of water. This lifts up and activates a switch if your dishwasher has this option. You will also find the shape of the base directs all t ... Dishwashers

I have a dishlex global 270 i cant find a model no i only have a serial and manufacturers no. What i wanted to find out is does this model have an element that heats the water. I only have one hose and when i used it with cold water it didnt heat up so i am using hot water.


Hi\015\012\015\012\015\012Thanks for using FixYa. I hope you understand that no one can tell you what are the specifications of the product until you provide the model no# however, dishlex usually have element in their dishwa ... Dishwashers

My dishlex globale 300 has a modle no that is dx300wa*02 the eco light and pump keeps running i have recieved advice to drain/dryout the kidney shapped over flow tray but mine doesn't seem to have one. i've taken off the bottom cover to get a closer look but still can't see it i've also tried tipping the washer on it's left side right side,backside and even upside down to try and drain the extra water but that has made no difference please help


Hi,\015\012Try taking the dishwasher out of its wall space and tipping it back and forth. Apparently the weight of water gathering in some component triggers the 'eco' function. Allow it to evaporate by waiting for few days. ... Dishwashers

Cant open the dishlex global 450 door , latch broken


... Dishwashers

I have a bosch SHV43A03GB dishwasher. It has a problem when it cut out water flow in. the guy who repairs it seem s only to have to push a button or switch under the machine to get it to work again, cant find switch/ button- please help!


Programmer not working ... Bosch 24 in. SHU53 Built-in Dishwasher

I have a Dishlex Global 500 dishwasher (DX500lWW*b). Woke up the other night to find water all over my kitchen floor. The hot water hose connector to the hot water tap split (bursted). The dishwater was not in operation at the time but I can only assume when the hose bursted the dishwater came on to alert me? the code on the dishwater is displaying ''oF'' - which means Incorrect fill level of fill time. I have consequently had the hose connector repaired but the display still has the code ''oF''


I found this\015\012\015\012"Hi - answer I was given by Electrolux Help was: pull machine out from under bench onto old towel, tip GENTLY onto left hand side (your left as you face the front of the machine) after it has drained, stand up ... Dishwashers

Do not know how to change settings where can I find a manual for a dishlex global 300?


Hi sharon. what settings do you need to change on the machine? please reply and i can guide you thru the changes. or you can ring electrolux and i"m sure they can help you. ... Dishwashers

I have a Dishlex Global 300 dishwasher that stopped working mid-cycle. I had to sponge out all the water. Now none of the buttons do anything and none of the lights come on. When I turn it on at the power outlet it gives a single beep, but I cant get it to do anything else. I've opened it up and there is no water or dampness anywhere inside. Any ideas?


It is your control board inside your dishwasher. ... Dishwashers

I have a dishlex global 500, will not draw water in, comes up with error code nf. I have taken all hoses and filters apart, cleaned them, still no luck. I cannot find a blockage. ps, the dishwasher tripped my power off , then error message came up when I reset power


... Dishwashers

Where do i find the solenoids on dishlex global 500 dishwasher


... Dishwashers

Miele dishwasher Intake Drain light on and beeping. No water in tray or blockage I can find..


... Miele Optima G2470SCVi Built-in Dishwasher

Dishlex global 500 pump running continuously


... Electrolux Dishwashers

How do you reset / clear dishlex global 300 dishwasher


... Dishwashers

Beko dwd3410s dishwasher water not heating up cant find a manual for it and cant find the heater element


Go to www.beko.co.uk\015\012then to support & at the bottom of the list is manuals ... Beko Dishwashers

Dishlex global 300


Try holding the start and program buttons simultaneously for a few seconds, it seemed to reset itself for me-i have done this a few times now. ... Dishwashers

Dishlex global 450 dishwasher won't fill properly


... Dishwashers

Like sand Not getting the dishes clean it seems like sand and other stuf in the glasses :( cant find any extra filters , have clean the regular ones in the bottom of the machine. Please can someone help me find a solution or find a manual online.


Clean out both top and bottom spray arms\015\012Deep Diver ... Bosch 24 in. SHU5305UC Built-in Dishwasher

Model 01902 2350 psi . engine runs fine , sprays out nozzle but lower pressure and water sprays out plastic elbow on relief valve , that is supose to **** in soap if used , cant hold finger over spray from elbow , high pressure , took apart relief valve and plastic valves all orings are ok , brass pump seals look ok , all back together , still blows out elbow . ?? plastic spools were out by somebody else , not sure if they are in right , cant find picture to compare .


It sounds as if the non return valve in the elbow is the wrong way around .The o-ring normally goes in first then the ball then the spring. Try it and good luck. ... Pressure Washers

Hi i am trying to remove my dishwasher from the (way it was attached to the undercounter) i cant find my mannual to find out how in the workd it is attached. Please help


The installation instructions can be downloaded from this site.\015\012Hope this is helpful. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I HAVE A MAYTAG MODEL MDBTT59AWQ DISHWASHER THAT WILL NOT START UP. LIGHT ON CONTROL PANAL FOR HEAVY AND LIGHT LOAD LIGHTS, DELAY ONE DOESNT AND THE START/CANCEL ONE DOESN'T LIGHT EITHER. WORKED FINE A COUPLE DAYS AGO. TRYING TO FIND A MANUAL OR PARTS BREAK DOWN BUT CANT SEEM TO FIND ONE FOR THAT MODEL.


... Maytag Dishwasher

North star eletric hot 2000 psi 3.5 gal per min oil pump had blown shaft seal. replaced with new pump. put small allen plug in return port. I have oil flow to the pump but none comes out port leading to burner even with shutoff switch removed and pump turning. Installed test gage 0 pressure. Took off bypass line and ran into can. pumps small amount of fuel into can that way but with uneven flow & small bubbles. nomatter what I do I just can't get fuel outlet port to burner. pump # A2VA-7116 pl


... Northstar Pressure Washers

Soap door on my Whirlpool dishwasher model # DU810SWKU0 does not open.I had inner door off to check rinse agent problem.Is there something i did putting inner door back on? If I close soap door and turn timer knob on outside of door the soap door will open after I make two full turns of the knob.If this cant be fixed can I just put soap in the bottom tray that has no door or put soap in both trays and do not close the soap door? Thank You RH.


... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Just installed fisher paykel model 88270 dishwasher, bottom drawer has no power,and top drawer does not fully drain. Cant find another power cord, is there a second one? Cant locate the manual.


... Fisher Dishwashers

WE HAVE GOT A BOSH DISHWASHER AND IT DOESN'T HAVE A CODE WE CAN ONLY FIND NUMBER 900035833 WHICH WAS INSIDE IT AND WE CANT FIND A manual to mach it


... Bosch 24 in. SGI43A72 Built-in Dishwasher

Hobart LX30 Thank you for your help earlier. I figured out a way to get the machine running on 220. Now my problem is finding the intake for the sanitizer and detergent. I have looked all over the machine and I cant find tubes anywhere. The guy I bought it off of tells me that when the water temp is over 170 you don't need any cleaning products. I just want a second opinion. I feel that our glassware is not as clean as we would like. Any thoughts?


I'm not sure I'm comfortable with the direction your seller is leading you. I assume this machine is installed in some type of place where you are serving food to the public. If this is the case, then the local health inspector will expect to see a w ... Hobart 24 in. LXIH-3 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0609 seconds