Having problems with your Dishwashers ?

Unit has been out of use for about 4 years - bought from Daimaru Auction and never used since. Have questions as for how long maschine can bee without beeing used and what i have to look at reusing unit after such long time of storage. Unit is very well presented, no any damages or visible defects


Answers :

Hi,
\015\012
\015\012As you have told us that the machine is very well presented with no damages or visisble conditions, but before using it i would advise you to put some lubricant on the machine parts(not electrical ) before using it.
\015\012Note that it is best if you use a lithium-based lubricant rather than silicone based lubricant.
\015\012Also check for any broken wires.
\015\012
\015\012Please start using the machine and as you have already told us that the machine is in good shape,
\015\012Do let us know if you face any issues.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Unit has been out of use for about 4 years - bought from Daimaru Auction and never used since. Have questions as for how long maschine can bee without beeing used and what i have to look at reusing unit after such long time of storage. Unit is very well presented, no any damages or visible defects


Hi,\015\012\015\012As you have told us that the machine is very well presented with no damages or visisble conditions, but before using it i would advise you to put some lubricant on the machine parts(not electrical ) before using it. ... Dishwashers

Kenmore Dishwasher model 665.1675592 doesn't seem to wash as well as it used to. Seems to have a low water level. Filler valve works, allows water in, but never seems to fill enough. No spray reaches top shelf, I think due to insufficient water level. It's like the timer doesn't stay on long enough for it to fill. Also cycle time seems WAY up, but if the timer is slow, how does it time out filling so fast? Looks like it would be slow all the time. Suggestions?


... Kenmore Dishwashers

My 5 year old bosch dishwasher cycles to one minute and then cycles forever and ever with very soapy water in the bottom. After a very long time, the water is out of the dishwasher but soap residue is left on the dishes and the bottom ot the dishwasher.We are presently using only 1/2 teaspoon of detergent (Finish brand). I have had a repairman here to look at it, but he didn't seem confident that it was a timer issue and even though I have paid the exorbitant service call fee, I am not sure I wa


Hello,Welcome to FixYa.Based on your description ... Bosch 24 in. SHU66C05 Stainless Steel Built-in Dishwasher

My dishwasher is brand new Model FDB1502RGS0. I used it for the first time today. It seemed to be cleaning for a very long time. It was up to 2 hours and I had to leave so I turned it off. How long should it take. That seems like an awfully long time. I kept waiting for the drying mode to start and it sounded like it kept filling up and emptying. Does this sound right? Please advise asap.


Most DW today take a minimum of 90 minutes. Run the hot water from the\015\012sink until it gets hot, then start the DW, this will shorted the first\015\012wash cycle. It is not uncommon for the DW to run 2hrs or more based\015\012upon the water temp ... Dishwashers

During power scrub cycle which is the one we use most of the time the dishwasher stays at one minute fot a long time. the dishes come out clean and it finally does finish cycle just dont know why it takes so long on last minute of cycle for so long


It's just heating the water more ... Bosch 24 in. SHU43 Built-in Dishwasher

For my Kudi01dl model dishwasher, the rinse light is on, but the unit will not respond to any buttons being pressed and won't turn on. When I press any buttons, two horizontal lines show in the front, but go off as soon as I let go of the button. Is there a ways to reset the unit? Everything was functioning fine the last time I used it. I use it about once a day. The problem started when I heard sounds coming from the unit, very loud motor sounds. The door was closed but I had not turned


... KitchenAid 24 in. KUDI01DL - Multiple Color Built-in Dishwasher

Have a bosch dishwasher model shu3032uc-14 doesn't clean very well it seems top spinner doesn't always turn, had service look at it and couldn.t find problem recommended to use a water softner, other people have same unit and do not use a softner and theirs works great what else should i look for thank you


... Maytag Dishwashers

80% of the time the unit finishes with an inch of water still in the bottom. We always prewash dishes , so shouldn't be clogged drains and have only used the unit a dozen times because of the drying problem.


Hi Please note that dishwashers don't drain out the complete water such that heating element doesn't overheat. However, if it seems to be a lot more water then it is due to clogged drain filter or drain pump. Turn off the dishwas ... Frigidaire Dishwashers

I have a Ryobi power washer with subaru motor, model #RY30080. I bought it 3.5 years ago. I only used it one time as purchased. This summer,it did not start. Yes, I left gasoline in the unit. I did not know that it require to drainout the gas prior to winter storage. Help, what can I do to get this machine starting again. Used only one time.


... Pressure Washers

Hi I have a flavel dwf640 w dishwasher and since i've had it it doesn't seem to be washing the dishes properly at all, glasses are all smokie looking, cutlery are all grey looking and its not taking the tea and coffee stains off the cups. I use finish powerball tablets and salt and rinse aid , i also have cleaned out the filters and used a dishwasher cleaner, and yet this is still happening, most of the time i have to scrub my dishes first and leave my cups and glasses and cutlery steeping to g


... Dishwashers

We have and older Jackson model 10 AB at church, used 10 to 20 times per year. The pump motor quit this summer and was replaced by a local appliance service company. About $700 job. Upon using it recently, the first time since the new pump was installed, the RINSE cycle seems very anemic, that is, low volume and low spin rate. The dishes were not completely rinsed. Temperature was correct, 185 degrees. The service person came back to look with no improvement and now the Heaters will not co


Sounds like a wiring problem but it is controled by a thermo to make sure you get to the proper tempt . so ck the connections and mke sure the thermo is good . . and the element is good . ..hope this helps mm . ... Jackson 10A Free-standing Dishwasher

My dishwasher is dripping quarter size drops of water right underneath the unit. I ran it last night and when I woke up water was all over the floor. The only thing was that I used a different soap for the first time. Suds were still in the unit. I'm running it now with the old soap and it's just dripping a few drops at a time.


Bottom door seal needs replaced. ... Dishwashers

I used the "rinse only" cycle on the dishwasher a little while ago. I've never used this cycle before. After dinner I tried to start the dishwasher, but no other buttons on the panel respond except the last one I used, which is the rinse only cycle. I push and push, I tried pushing and holding, nothing works, I get no lights no anything. I've been using the "light wash" cycle for a long time and I normally just push the start button and the last cycle used starts automatically, so I wasn't a


Try un-plugging the dishwasher (check for cord under the sink) or turn off the breaker to it to re-set the control board. If this does not resolve your issue you may have a defective key panel. ... Dishwashers

My dishs and glasses have a foggy film on them all of a sudden, I use a powder dishwasher det and tried jet dry too, I can't use liquid cascade as I used it before and I do not have softwater and liquid cascade immediately foggs up and leaves a film on dishs with hard water. So I do not know why this is happening to my dishs now with the powder I've been using for a long time??


Put two cups of vinegar into your machine and run the hottest and longest cycle you have this will clean the machine and solve the problem. ... Dishwashers

Bosch dishwasher starts cycle works down on time then time goes back up so running very long time. Recent use of cascade pods.


... Bosch Dishwashers

This dishwasher is older than most living people in this business. It works great except it is a 208 three phase unit. It is in St.Peter's church in New York Mills, MN. We bought it used during our remodel project in 1994 for a price of $800.00. That was our mistake. We had a converter installed to accomadate the 3 phase power supply. So we have this converter running 24 hours a day using up electricity and we use the dishwasher four times per year. I am wondering if we could replace the motor o


This unit is a dinosaur. The 3-phase converter had to cost twice as much as the unit. Best solution - turn the power off to the 3 phase converter when not in use.Better best solution - find a newer unit that will be repairable should it n ... Hobart AM14-253 Free-standing Dishwasher

Have a new GE Profile dishwasher. The LED time display started at 62 the first time we used the machine. It keeps going up and is now at 108. Is it broken and how do we reset the time back to something more reasonable. We typically pre-wash the dishes anyway and it shouldn't have to take that long to clean....thanks!


Have you tried to turn the mains power to dishwasher off and back on again.\015\012\015\012It also possible the inlet water temperature is not at the recommended temperature so it is compensating for heating it to the desired temperature. ... GE 24 in. Profile PDW9280JSS Built-in Dishwasher

I have a new LG Dishwasher LD120W1 purchased on 6/11/09. Have only used it approx 3 times. When I turned it on today it started up and after a few minutes it starts whistling and does not fill. Have looked at filter and spray arms, all clear. Could you please advise what else to do or look at. I can pull it out to look at hose it was installed by a plumber.


Hi,I would Glad to tell you what needs to be Done!! But, as the Dishwasher is Under Warranty, give them a call. Why to spend any Money, when the washer is under Warranty :) Now, It sounds like a Water Pressur ... LG Dishwashers

No pressure,but some times have hi pressure, but just for a few seconds. The person before me had the machine without been used for long time now has this problem. only had pressure for 2 times than nothing again help me please. Thank's Astro


First if you have a filter where the water is coming into machine and if you have not already cleaned the filter clean it,but i'm sure you have already thought of that after that the pump may have a problem, most of the time it is cheaper to buy ano ... Honda Karcher G2400HH-R Pressure Washer

Most recently, we have noticed that the dishes and silverware are coated with a filmy substance and serious streaking. We do have a water softener from Culligan, but we do not think this would all of a sudden cause this problem. We used to use a liquid detergent, but have been using the crystal detergent for some time now. any suggestions? Unit is probably around 6-7 years old.


Www.dishwasherfilter.com has an amazing product out that fixes this problem once and for all. it is a small filter that filters the hardminerals out of your water before en ... Dishwashers

I'm having a similar issue with a unit that I purchased from Best Buy a few weeks ago. I'm not sure of the model number as it was a display unit and they didn't give me the proper user manual, but it looks just like the unit pictured in this post. I've uploaded a video of the issue to YouTube : http://www.youtube.com/watch?v=uCx8DzY-Iv0 The first time we hooked it up, it ran for about an hour before shutting off and becoming completely unresponsive. None of the buttons would light up. We repl


Watched the youtube video about the problem with your dishwasher. The thing that I am unclear is who replaced the thermal fuse and the control board? Not sure how this was done without knowing the actual model number. Is it possible to clarify this ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have a kenmore dishwasher model #655.1374 or 655.1384 which is only about a year old. I am having a problem with the controls. It will not allow me to use smartwash. The only control that can be used is quick rinse. I reset it by pushing Sani rinse and heated dry. All the lights come on and it seems to do a test. But after that still the same thing except if I push start resume it goes to normal wash which stays on a long time and periodically the cancel drain light comes on as well as the 4


... Dishwashers

My sound conditioned Whirlpool dishwasher is real old. It fills up completely with water. It looks like it will overflow, so I stop it. I thought it always started washing from the start. Do they always fill completely up with water, then start washing. I never noticed. I am afraid the water will overflow. Can it? Last time I ran this, it had a real loud motor. I used to hear the motor running from the start, but now I don't, just water filling up to what looks like overflow if I let it. I baile


... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

The "clean light" on our Kitchenaid KUDIO1FLSS flashes 7 times and I cannot clear the problem to allow the unit to operate. Is there a sequence, using the control buttons, to permit the unit to run a system check? I disconnected the power for 30 minutes but that did not solve the problem.


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

European Bosch SKT 5002/02. Was disconnected by our plumber to install new cabinets. Not used during winter, as it is never used in winters. Fills with water, makes no noises but does nothing else. Have been told on-line to try to turn the motor (blades, I suppose) but it looks like the whole unit is behind galvanized panels and I don't want to do what I shouldn't......


Hi.Re:"Have been told on-line to try to turn the motor (blades, I suppose)" Someone has probably told you to energize the impeller pump motor directly by jumping its contacts to find out if the motor is working. That is a deli ... Bosch 22 in. SKT5108 Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0887 seconds