Having problems with your Dishwashers ?

Maytag dishwasher wont light up or start. the plug is securely plugged in and the outlet works


Answers :

Hello,

this is a power problem. Its either the power of the maytag is faulty or fuse has got burnt from the outlet socket.

Check the outlet socket fuse and if that's not where the fault is then, I am afraid you will have to end up giving the dishwasher to an expert because its not what you can do yourself. Its involves dismantling the dishwasher and checking the panel power panel.

Just try to trace the electric wire that enters into the dish washer and make sure there is current passing into the dishwasher. And if power is entering the dish washer and its not turning on, then it has to be diagnosed by an expert.

Best regards.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Maytag dishwasher wont light up or start. the plug is securely plugged in and the outlet works


Hello,this is a power problem. Its either the power of the maytag is faulty or fuse has got burnt from the outlet socket.Check the outlet socket fuse and if that's not where the fault is then, I am afraid you will have to end ... Dishwashers

My dishwasher hasn't been working for a while... It's plugged in and the breaker isn't tripped but it wont work the lights on the front aren't even working


Fire her ****!! and send her packing and find a new one LOL there is however a reset button under the front you can try to see if that helps ... Dishwashers

No power Lights on dishwasher do not light up It is plugged in and outlet is working


Ck and make sure door is closed. or ck door latch. ... Dishwashers

Dishwasher won't start and it is plugged to working outlet. Control panel lights do light up. When I turn the setting dial to start, nothing happens. It looks like the last cycle never finished as there is water on the bottom. Any thoughts what might be wrong?


... Whirlpool DU912 Dishwasher

The dishwasher does nothing like it isn't getting any power. No lights or anything. The disposal is plugged in the same outlet and it works.


The first place to start is with the main fuse if it is still intact then its a mains power component. and this will require a pro tech to trace and repair ... Whirlpool GU2400XTP Built-in Dishwasher

My dishwasher just stopped working. wont turn on. I tried plugging it in to a different outlet and it doesn't do anything.


Make sure the door is closed and latched. Electrical switch inside where handle will not allow unit to operate if it is not closed completely. ... Whirlpool GU2400XTP Built-in Dishwasher

Hi. I have hoover HFI 3015 dishwasher. Just went to put it on and all the lights are flashing with a constant alarm. Have checked inlet and outlet which seem okay. Have tried switching off at plug and it still wont reset. Any ideas? thanks


... Dishwashers

My Miele dishwasher turns off (light goes off) when door is shut and wont work


... Miele Optima G2470SCVi Built-in Dishwasher

Frigidaire Dishwasher won't start (lights cycle but no water/motor) Model Number: FDB1050REB2 Brand: Frigidaire Our dishwasher is 1.25 years old and already not working (grrr!). When it is turned on, the lights cycle through like a normal wash cycle, but the motor isn't engaged nor does any water cycle through. This happened about a month ago and I took everything apart to make sure all of the connections were secure and it started working again...not this time. Any ideas?


... Frigidaire Dishwashers

I have a diplomat hja 8630 integrated dishwasher and it has stopped working. When I turn it on all the program lights stay on, including the 'play' light and the dishwasher wont work no matter what I do. Hope someone can help


... Dishwashers

Matsui MF160 integrated dishwasher: Had problems for a while now with the buttons on the control panel ie: on button needed to be pressed down hard for it to connect and sometimes the wash cycle programme buttons would just keep flashing between the three of them and then they would settle down, for the past few days the on button light has stayed on and wont go off and now all the lights on the control panel have gone off and the dishwasher wont work at all, we have tried dis-connecting it, che


... Dishwashers

Hi In the middle of a wash cycle, my dishwasher tripped the circuit breaker on the wall. I diagnosed this by unpluggin dishwasher, plugging in a different appliance and switching circuit breaker back on. new appliance worked OK. When dishwasher had cooled, I tried it again on same circuit (which I knew was working properly). The lights came on for about three seconds, and then the circuit breaker cut back in again, so I knew it was the dishwasher that was causing the problem. Is there anyt


Ck the connections where the cord hooks to the wiring harness. look for hot or shorted wiring . also ck the contro panel for the same . generaly if you have a power draw like you are saying then you can see t ... Dishwashers

Haier dishwasher CDW300SS beeping 10 times and 4 lights flashing,,, help The dishwasher will work, it fills, it washes and it empties, BUT will not start now, and the 10 beeps and the four lights flashing,, so wont restart and go throught the program... Is there some way of resetting the dishwasher to restart. help thanks. glenn


... Haier Dishwashers

We have a Maytag Quiet Series 300 dishwasher (#MDBTT 60AWB) that is in a house we recently bought. A few days ago it worked, but now it won't turn on. We checked the plug that goes into the outlet and it is plugged in. Yesterday we did have a plumber come out and unjam the garbage disposal. I don't know if that could be the source. Is there a reset button on the dishwasher? Basically there is no power going to the dishwasher. Any suggestions?


... Maytag Dishwashers

Dishwasher does not seem to have power. I have a Kitchen Aid, under counter unit, 9 years old, model KUDS01I. I used it 2 nights ago with no problem. When I push a button, nothing happens, no lights show, etc. It is plugged into the lower half of a duplex socket with disposal plugged into the top. Disposal works, so the problem seems to be with the dishwasher. That also eliminates any issues related to breakers or ground fault indicators, etc. Is there a reset button on the dishwasher? Is there


... KitchenAid Dishwashers

I have a kenmore ultra dishwasher 655.177779990 and the lock out light was flashing until I unplugged all connectors and plugged back in. Now light stays on and everything else has stopped working. Tried to reset but no luck what can I do to reset dishwasher?


Hello & Welcome to FixYa\015\012\015\012\015\012You\015\012are right, the unit needs a reset. To reset the control you can press and hold\015\012the AIR DRY/RINSE ONLY button for 15second ... Dishwashers

I have a whirlpool aquasteam 6th sense dishwasher when i loaded it yesterday a light came on with the picture of a key and my dishwasher wont work can you shed any light on this please


It means it is locked just look for the key symbol on the main front of the machine and press for 3 seconds it will then unlock. ... Whirlpool ADP 8900 Dishwasher

My dishwasher Kenmore 665.13462k902 worked fine for a little over a year, now it wont even start. At first, the high temp button wouldnt light, then no lights until you pushed start...tonight, nothing works...any help?


... Kenmore Dishwashers

My dishwasher Kenmore 665.13462k902 worked fine for a little over a year, now it wont even start. At first, the high temp button wouldnt light, then no lights until you pushed start...tonight, nothing works...any help?


... Kenmore Dishwashers

I have a GE dishwasher with front control panel and at first the wash and dry lights stayed on and it was beeping every 30 sec. when I turned the breaker off for the required 30 sec. the lights started flashing and it is still beeping. The control panel seems to be frozen as it is not working and wont do anything.. everything was working fine before this. I bought it at Home Depot on 3/14/07 and had it installed by a licened electricion. Help


Call ge @ 800-386-1215 for service ... Dishwashers

No start The electrical outlet has power. The Miele G894 dishwasher is plug in. The dishwasher does not start. There is no LED lights lighted. Pushing any buttons on the face has no results. I was wondering if there was a master reset button like those on a motor.


Hello i'd check to see if theres a glass fuse in side the dishwasher it will be on the power board good luck\015\012\015\012shaun ... Miele 23 in. Novotronic G841 Built-In Dishwasher

My bosch smu50e15AU dishwasher ,wont work ,my daughter used dishwashing liquid ,in it ,it bubbled out around the door ,now the only lights funtioning is the end & check water light and it will only turn off at the powerpoint ??????


My SMU50e15AU dishwasher keeps stopping and the check water light keeps coming on. I have checked all the hoses and none of them are kinked. There is a platsic plate beside the filter that im not sure what it is as there is no picture of this in the ... Bosch Dishwashers

Kenmore undercounter dishwasher model 66517019400 wont start..I want to purchase a new control board do you think this is the problem? normal cycle light comes on, cancel button works, heat on button works, just wont start ??


It might not start because the water solenoid is failed, or the water level sensor is failed.\015\012\015\012You have to use a meter to test these components first. Put your voltmeter on the two leads going to the water solenoid, and psuh ... Kenmore Dishwashers

Dishwasher wont let u select a cycle...all buttons seem locked...ive unplugged it for 5 seconds or so and then plugged it back in and the normal wash button light comes on and the heated dry button light comes on, but it wont start and it doesnt respond when buttons are pushed...please help. thanks


... GE GLD4560NSS Stainless Steel Built-in Dishwasher

The three lights for Pots & Pans, Normal Wash, Econo Wash are all flashing. When I hold the start button down for four seconds, just the Normal light is on. However, once I close the door, all three lights are on again, and the dishwasher does not start. We have tried unpugging it and then plugging it in again. It worked once then went back to all three light flashing. Before this, only the Normal Wash and Econo Wash lights were flashing.


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012I can't seem to access any previous post dialog that may have taken place but I'd like to help if you can fill me in on whats taken place to this point.\015\012\015\012The scenario you describe i ... Viking DFB450 Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2058 seconds