Having problems with your Dishwashers ?

I need to fit a new handle to my Zanussi Dishwasher DA4142, how easy a job is this to do?


Answers :

Generally you can change the handle the same way you change a color on your panel. remove screw around the inner and outer door then you will see the screws holding the handle in place. pretty easy. if this helps you then help me with a 4 thumbs up post. thanks!
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need to fit a new handle to my Zanussi Dishwasher DA4142, how easy a job is this to do?


Generally you can change the handle the same way you change a color on your panel. remove screw around the inner and outer door then you will see the screws holding the handle in place. pretty easy. if this helps you then help me with a 4 thumbs up p ... Dishwashers

I am trying to fit a new outlet pipe to the dishwasher Hotpoint DWM 37 but the old pipe won't come out, what do I need to do? ( I have got the white clip off the back but the pipe seems to be fitted into the dishwasher itself)


... Hotpoint 24 in. DWM37 Built-in Dishwasher

I have a Zanussi Fitted dishwasher and I notice that the board under my kitchen seems to be getting black,I think it is the dishwasher leaking water from underneath.. Is there any common problems with this type of dishwasher. Waste pipes leaking etc?? Are they easy to get out of the units and what shoulf I watch out for.


Yes sounds like some kind of water leak. Take of the front plinth and check underneath the units and DW. I presume you DW is adjacent to the sink so please cheak all pipes including waste asap. Also opening the DW door whilst it is running can splash ... Zanussi ZT485 Built-in Dishwasher

Dishwasher opening Due to a kitchen remodel with a slanting floor, I have a dishwasher opening that is only 33.5 inches high at the front where the new tile stops. Most dishwashers say they need 33 7/8" but Boshe and Jenn-Air seem to fit maybe. Any thoughts?


You can remove the feet from the bottom of the dishwasher ... Miele 24 in. G656SCi Plus SS Built-in Dishwasher

My zanussi fitted dishwasher is leaking water through the door. removed front panel to see what is going on and the water is spurting out of two gaps in the seal. the seal is brand new and manufactured with these gaps. is there too much water in the dishwasher - does it have float valve that could be at fault?


It has a pressure stut,that should tell it to stop filling the machine,it sounds like it has gone ... Zanussi 24 in. ZDT6041 Built-in Dishwasher

Model 587784100 My 18inch Kenmore apartment-sized portable dishwasher leaks when running and needs a new main rubber gasket (where the door seals the washer), and a new collar of some sort of white hard plastic collar at the very bottom of the spinning washer arm (which I believe helps make it spin more freely and not "chatter"?) My question is: Is it possible foe a handy person to replace these parts (looks fairly easy), or should I get a proper Kenmore/Sears repairman to fix it?


If you think you can do it then do it. it is normally not any harder than it looks. now because i work there i would say call them :) but you can change those parts fairly easily ... Kenmore Dishwashers

When the cyle is complete the dishes are cold and wet and greasy ones not washed properly. I think it needs a new heater but the person who came out to look at it said it was because it is in my garage (?). I have always had my dishwasher in the garage and never had this problem. If it is the heater, is it an expensive repair or would I be better off buying new. I have a six year old Zanussi de6754


At http://www.usersmanualguide.com/zanussi/dishwasher/de6754\015\012you wil find the user manual, if the dish washer is instaled proper it ... Dishwashers

I just got delivery of my new Blanco BFD4X dishwasher, but need to remove the top, so i can fit unit into my dishwasher space. But not sure how to do.


... Dishwashers

Our dishwasher had to be removed. In reconnecting it to the water supply under the sink, the plumber could not keep it from leaking. I think there was a rubber washer that got lost during the disconnect/connect procedure. He then proceeded to gut off the end of the PEX hose which has a ridge and the last 1/2 inch is a little smaller than the hose. Now he says we need to order a new PEX hose from the factory. The PEX hose is too big to fit into the fitting. Cannot a normnal flex hose for thi


... Dishwashers

Need exact maytag MDBD820 dishwasher specs (measurements) so I can replace it with a new dishwasher with same dimensions which will fit in the same small space. I am unable to pull the old maytag all the way out to measure it. thanks!


... Maytag Dishwasher

I have a Candy CS 455M slimline dishwasher which is 3 years old. The program button has stopped moving round I put dishwasher on and went to work and it was still washing the dishes when I got home from work 8 hours later. I thought it might have stuck and been a one off but no it happens every time is it the timer? is a new timer easy to fit?


... Candy 17 in. CS455 Built-in Dishwasher

Replacing dishwasher and need the dimensions for the Whirlpool Gold GU980SCGB3 Built-in Dishwasher to make sure the new one fits where this one is currently. Can you help?


... Whirlpool 24 in. GU980SCG Built-in Dishwasher

I am an Australian who has bought a second hand Defy Dishmaid dishwasher from a South African work mate. It is a 2/3 year old machine that he bought over from South Africa. When he moved into a new house the machine did not fit his kitchen bench opening much to his frustration so he sold it. When placed in my kitchen it was a tight fit and upon recent inspection the floor pan of the unit, it may have buckled. It worked well until recently when we did some renovations when I needed to remove


Hi\015\012\015\012This means that the dishwasher is unable to drain water completely, you can run your washer at\015\012its hottest temperature setting with 3 cups of vinegar inside the unit. After\015\012this take off ... Dishwashers

Fitted New Dishwasher Control Panel - Need reset sequence


One likely cause you can try first is to disconnect it from power via the cord or a breaker. after a brief period, it may reset itself.otherwise you likely have a logic board issue.logic boards seem to be very vulnerable in dishwasher env ... GE Profile PDW8400J Built-in Dishwasher

I need to fit an "aesthetic" door to my new Kenwood KID60S10 integrated dishwasher and the instructions are woefully inadequate - can you point the way to any guidance? Thanks, Geoff


... Kenwood Dishwashers

I have purchaed a new dishwasher not long ago. I would like to install it by myself. What tools and accessories and needed for the job?


You would need a Dishwasher Installation Kit that contains all you might need. It has everything you need to connect your dishwasher to your waterline, including a 6-foot braided stainless steel waterline, a 3/8-inch compression union, an "L" fitting ... Dishwasher Accessories

Need new door handle #fdb658rac1 - Dishwashers


... Dishwashers

Maytag Dishwasher Model No. MDB8601AWS Plastic 4-inch door handle latch is broken. I need a new one replacement. Could you provide me a part number for the latch? Thank you, Philip Monsees


Source for 144 different parts for your dishwasher:\015\012 ... Maytag MDB8601AWS Built-in Dishwasher

I have a Lady Kenmore(model 665-1596581) that needs replacing. Is there a current DW model that will accept the wood panels from the Lady Kenmore? Where can I find the dimensions of the current cabinet door kit for the DU 1055 XTS to see if the old oak panels will fit the new dishwasher.


... Whirlpool DU1055XTS Built-in Dishwasher

Hi I have a Zanussi ZDF501 dishwasher that stopped heating up intermittently. It got worse and I fitted a new heater and all was ok for a few months. Then the intermittent failure started again. Note that I tested the old heater and it is actually OK without a short circuit so I don't think it was the problem adn can be re-used. Could it be the thermostat or heat sensor? I am concerned it might be the PCB since the failure was intermittent. Thanks Dave


In my case, although the solder joints on the relay looked poor, improving them didn't help. I had to replace the relay. Fortunately, Maplin stock a compatible one, JM67X for 1.99. See ... Zanussi Dishwashers

My zanussi dishwasher zsf4123s stopped getting hot,i bought a new heating element but still does not heat up,though im not sure if i fitted it correctly


... Zanussi ZT485 Built-in Dishwasher

I need the dimensions of my maytag 24 inch 18 yr old builtin WU284 dishwasher. I was planning on replacing it, and I wanted to make sure the new one would fit into the opening.


... Dishwashers

HI I HAVE A ZANUSSI ZDF221 DISHWASHER THE WATER WASN'T GETTING HOT ,SO I FITTED A NEW ELEMENT BUT IT IS STILL THE SAME ,ANY IDEAS WHAT IT COULD BE MANY THANKS ALAN GRIFFITHS


Hi the most likely cause is the electronic mounted in the control panel behind the progamme dial. there is a relay which can unsolder itself. you can try resoldering (use lead free solder). or change the electronic. ... Zanussi Dishwashers

My handle has snapped on my zanussi dishwasher ZDF 231 do i have to source a new door


... Zanussi Dishwashers

I have a Bosch dishwasher without a model number however stencilled on the back it says New Hydraulc 25/10/07 900073929 and it has stopped pumping out and I have cleared whatever is easy to reach and clean, but still needs help. What can I do now?


... Bosch 24 in. SGS56E02 Exxcel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2523 seconds