Having problems with your Dishwashers ?

We have a Kenmore dishwasher model # 15777990. The touch panel stopped working all of a sudden. The only one that does work is the the cancel/drain button. Any ideas?


Answers :

Hi, this is just a simple case of partial contact.. All you need to do is general servicing of the control panel board, if you don't do it now, it will also affect the cancel/drain button.
So call in a technician to service it now....

Take care
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Still not working. Any one with any ideas how i can get it working again.thanks


Bad main control board,and fixing the board will only be a short fix.Sorry! ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Our dishwasher was taking in water, circulating it but not heating it up or moving through the cycle. My husband took the control panel off and there were some scorch marks on it so we got a new one. He replaced the control panel and the dishwasher went fine for one night. It heated up and washed everything perfectly. The next day when we put it on it was back to square one plus the lights on the control panel are now not working. Just wondered if anyone has any idea what we could do or are


Yes it's time to visit the dump ... Siemens 24 in. SE64A630GB Built-In Dishwasher

I have a Kenmore Ultra wash dishwasher model # 665.13692K600. It was working fine one day then all of a sudden I have nothing. No lights no nothing. I have tried shutting the breaker off and it didn't work. It is only two years old, if you have any idea that would be great. Thanks!!


You probably blew your thermal fuse that is attache to the main circut board, you can buy the thermal fuse seperatly. it is located in the console. ... Dishwashers

I brought my 2 yr old Kitchenaid model kudp01dl over from my foreclosed home to install where I live now, and the left side of the touchpad to run a load doesn't work anymore. I know one wire had jostled loose underneath, and my husband re-connected it to it's terminal, but could there be another I am not seeing as well? Or any other ideas? It still works fine to cancel, drain, and select drying options, etc, but I can't start a load!!!


It Is SOMEWHAT Common for WIres / or PLUGS to Come looes on Apliances Your Husband May need To Remove A Pannel and Thourelt INSPECT FOR this what you DISCRIBEVARY WELL MAY BE AS SIMPLE AS 1 WRE OR EVEV 1 PLUG OR WIRES THAT IS DISABLEING THE UNIT FROM ... KitchenAid 24 in. KUDP01DL Built-in Dishwasher

We have a Kenmore dishwasher model # 15777990. The touch panel stopped working all of a sudden. The only one that does work is the the cancel/drain button. Any ideas?


Hi, this is just a simple case of partial contact.. All you need to do is general servicing of the control panel board, if you don't do it now, it will also affect the cancel/drain button.So call in a technician to service it now.... ... Dishwashers

My Kenmore dishwasher model #66515639000 quit working. It was washing dishes just fine one day and then the next the buttons weren't working properly. The pots & pans button was flashing with the cancel button. After searching on your site, I tried to resent the control panel by pressing the normal wash button and the air dry button 3 times then opening and closing the dishwasher. Now the quick rinse button is flashing. Any ideas of what to do now?


... Dishwashers

I changed the handel and switch assembly on my dishwasher because the old one was broke.The dishwasher does not turn on. It still doesn't work. it doesnt even light up. although one button does glow a little. Do you have any idea what it could be? the model number is MDBH955AWB


Check for line voltage at the door switches and from there to the control board thats to the right of the door latch switches for line voltage,if you have line voltages in all these areas then replace the front membrane push button control panel that ... Maytag MDB9600A Jetclean II Built-in Dishwasher

Rosieres LVI 980A dishwasher displays error message 'E1' implying water supply is switched off - but it isn't. After a week or so it works normally and then after one wash displays E1 again. Any ideas?


... Dishwashers

Got dx303sk dishwasher heater not working a new one was fitted two months ago now stop heating any idea


First of all check the continuity of the heaters as if the heaters are open there will be no heating. Now if the heaters are good then the fault is with the switching, so your focus now must be to see the area of fault of the program switching. ... Electrolux Dishwashers

I'm attempting to reuse a Maytag dishwasher motor for a bench grinder. Since this is a reversible motor, I'm not sure how to connect the wiring to a simple switch so that it works in one direction only. The motor has 4 wires: blue, gray, red, yellow. Not sure which to connect to the hot (black), return (white) and ground (bare) wires from the romex and can't find a wiring diagram online for this dishwasher. Any ideas? Thanks.


... Hobart 29 in. AM15-1 Free-Standing Dishwasher

New SHE4AM16UC, professionally installed eight months ago. Worked fine with very light usage until now. Dishwasher starts normally but stops and signals "clean" after less than five minutes on any cycle. One inch of water in bottom that (I think) drains when a new cycle starts. Soap tablets are not ejected from compartment. Bosch authorized repairman says he now has two client dishwashers with identical symptoms and is asking Bosch support for ideas (he's changed pump, control unit, and float sw


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. If the clean light flashes, pauses, and then repeats.\015\012When the dishwasher doesn't sense a water t ... Bosch SHE4AM16UC 24 in. Built-in Dishwasher

I HAVE A WHIRLPOOL QUIET PARTNER 3 IT IS 38 MONTHS OLD IT IS USED 2-3 TIMES A WEEK BY WHEN I START THE WASHER, ONCE IT KICKS IN, IT DELIVERS THE LOUDEST SHRILL NOISE ONE CAN IMAGINE. IT IS GETTING LOUDER EVERY TIME I USE IT. IN FACT YOU CANNOT HEAR THE TV FOR THE LOUD ''SCHRILLY'' WHINE I AM OUT OF WORK AND HAVE NO MONEY FOR A REPAIRMAN I HAVE A 3 YR OLD HOME AND THIS REALLY BUMS ME OUT ANY IDEAS HOW I CAN SAVE MY WHIRLPOOL? THANKS IN ADVANCE MARTY


... Dishwashers

I am having the a problem with the bottom drawer on my Fisher & Paykel DD 603SS. Top drains just fine. I cleaned both the drain filter and the hose and it still won't drain. I had a service tech come out and he couldn't figure it out either...he thinks its the "computer" and the "sensor" and he wants me to order new ones - cost is like $210! I really don;t think it's the computer...the electronics seem to work fine...any ideas? Before this all started, a fork fell down and stopped the arm fro


The good thing is that you have a double drawer which means you have somethnng to continue cleaning dishes while you are fixing the other drawer and if necessary, you have a set of spares to try out as part of fault finding. That is the positive side ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have a Hoover Nextra HND 315 si dishwasher. The power light on the front comes on, but none of the programme buttons light up or work?? Have tried taking the panel off the front but all seems to be moulded in one peice and am unable to access the inside electrics...any ideas??


... Dishwashers

My Bosch dishwasher, model SHX46A05UC/30 has been working fine. I ran it once today on the Power Scrub Plus cycle (always use this one). Shortly after unloading the dishwasher I needed to run it again with more dishes. Within a few minutes of running the dishwasher I heard loud, almost grinding noises. Nothing appears to be stuck. Any ideas on what to do? This dishwasher has always been quiet up until today.


... Bosch 24 in. SHX36L05UC Stainless Steel Built-in Dishwasher

Code F2 I just replaced the door switch on an inoperable DD-602. My top drawer was working fine, but my bottom one has been offline for a while (door switch failed and I never got around to fixing it since I had the top). Well, my top finally failed too so I replaced both switches. Looks like everything is good on the top, but my bottom is erroring with an F2 code now. Kindof makes a thumping noise as it starts the cycle -- maybe 3-5 short thumps and then a 10 second delay, repeats. Any ideas? C


F2= \015\012The motor has not\015\012been sensed rotating\015\012\003 Foreign object has jammed the rotor\015\012\003 The rotor has failed\015\012\003 The hall sensor has failed\015\012\003 The electronic controller has ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Hi, the heating element in my Tricity Bendix DH200 needs replaced. I have purchased a new one but cannot work out where to locate the original. Any ideas as to how I would go about this? Thanks.


... Tricity Bendix 23 in. DH092 Free-standing Dishwasher

DD603HSS Hi from France. i'm the owner of F&P dishdrawer DD603HSS for 5 years and half. (New Zealand made) yesterday, the top drawer looks with no power, no lcd , nothing. like no power alimentation. as you know, for a 5&1/2 years appliance, there is no more warranty... have you any idea for the cause of this trouble. is there a fuse and the location of this one ? i know each drawer is autonomous, then i suppose each drawer is protected by a fuse. - i precise "The bottom drawer works fine".


There is only one power supply or input so you need to find out where the power stops from the bottom to the top drawer ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have a pressure washer with a faip 3 piston pump. the other day i was using it and it stopped unloading. i cleaned the unloader and it didn't help. I bought a new one and it still won't work. I e-mailed Ryobi and they will not respond. There were no instructions on installing and adjusting the unloader. Could you give me an idea how to install and set up the new unloader. Any help would be most appreciated.


I think your main problem is that the unloader valve needs to be lubricated. Use the very best water resistant bearing grease you can find. If you can e-mail me a pic of your unloader assembly I can try to explain how to set it up. [email protected] ... Honda Pressure Washers

I have a Bosch dishwasher Model SHE58C05. This model has two displays, one on the front where you can see and one with the hidden controls that you can't see when the dishwasher is closed. The display in the front all of a sudden stopped working today. Top still works but I can't tell how many minutes are left while its during the cylcle. I did have to cancel a cycle this morning because I picked the wrong one. Is it possible I hit a strange sequence and somehow cancelled this display (wishf


If you check your user manual there is a section that will guide you through turning off/on the display screen. I have tried to include the link for Bosch manual downloader but their site is down at the moment. If you do not have your manual and ther ... Dishwashers

Kenmore Ultra Wash model #665.1374* purchased 1/26/08 electronic control pad doesn't work properly - one wash cycle works (no matter which cycle is selected, it defaults to same one - light wash) - "washing" and "drying" cycle lights don't work -


... Kenmore Dishwashers

All Cycle Lights on with one blinking sometimes working often not working.


1) tight the connector wires very well and clean with spray contact, of course unplugged the machine2)resolder all point from the board for colder joint3) Try again.4) If the problem persist the problem is the board defective.5) Call ... KitchenAid KUDS301V Dishwasher

Smeg DF410SDX problem with Lights 5 and 6 stay on! nothing works, can not get any other settings to work! any ideas, nothing is mentioned in the manual about these error codes. thanks for any ideas


... Dishwashers

I have got a problem with my circuit board on my homark dw45bi any ideas where i can get a new one or fix the old one there is power going into 1 side and coming out of it but not going into the other side any ideas???


... Dishwashers

Our GE model GSD4320Z00B is having a problem with the drain system. I've run the unit in the test mode and it does pump the dishwasher down. The problem is the unit does NOT pump down during a normal wash cycle. The fact that the unit works in test tells me it is not the pump. I've checked all the hoses and drain paths and there are no obstructions, again verified by the fact it works in test mode. Any test that can be used to determine the problem besides replacing parts one by one?


... GE 24 in. GSD4320Z Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1211 seconds