Having problems with your Dishwashers ?

I have a Whirlpool Quite Partner II dishwasher that does not seem to have electricity. The 20 Amp breaker is OK. What else can I check?


Answers :

You need to also check the main power line to the dishwasher.there is a bigger chance that the control board has gone bad,also need to check the thermistor on the bottom of the machine this could also give you a power failure problem
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Whirlpool Quite Partner II dishwasher that does not seem to have electricity. The 20 Amp breaker is OK. What else can I check?


You need to also check the main power line to the dishwasher.there is a bigger chance that the control board has gone bad,also need to check the thermistor on the bottom of the machine this could also give you a power failure problem ... Dishwashers

Whirlpool dishwasher This dishwasher quit in the middle of a wash cycle,we had to empty it and wash by hand. I thought that maybe the breaker to the dishwasher popped but when checked it had not .I then noticed that there are no lights on the electronic key board .Even when not in use there should be one red LED that is lit. It almost seems as if there is no power to the dishwasher. Is there some type of backup safety switch or breaker on the dishwasher itself that I could reset?


Fuse on control board. ... Dishwashers

Own a Frigidaire Dishwasher Model Number FDB4315LFSO and now after about 2 years suddenly the display will not light and function anything. Without pulling the power panel off the whole line circuit seems to have power as they have my disposal unit tied into same electric line and that runs and so does everything else and no breaker is tripped. Is their a reset somewhere to check or any ideas what can casue the display panel not to function any commands at all. Nick


... Dishwashers

When trying to start the dishwasher, pressing the Normal wash button, the dishwasher gives a huge clunk and then it trips the circuit breaker. Upon resetting the breaker, I tried the next button over, which is Soak and Wash, and it seems to go thru the cycle fine. Another time I tried the Normal button, but put the left dial on Rinse and it started up, but it would clunk periodically and it seemed to have a 'hot' smell. I'm worried to use it - what could this be? Is there anything else I can try


Hi\015\012\015\012This is a very dangerous situation you must remove from the wall supply and desist from using, such a fault could easily make the casing "Live" and anyone touching it may be killed. You need to discover why this is happe ... Dishwashers

My dishwasher so my dishwasher seemed to have quitworking during a cycle. like breaker triped or something. i checked the breaker and thats fine. it seams like its hard wired in though. Would that be right? and is there a fuse or something that could/would blow during a wash? I dont know what model it is or anything it was in the house when i got it. The dishwasher is built in and it seems decently old its a kenmore ultra wash and it has like 10 buttons for the differend cycles on the left and a


Sounds like the fuse on the control blew. you can replace the fuse for\015\012around $20 or you can cut and splice the wires for free. If that doesnt\015\012work then you may have a loose conection in your junction box under the\015\012dishwasher. ... Kenmore 24 in. 15932 Built-in Dishwasher

I have a Bosch Dishwasher about 10 years old, model SHV4803UC/U07. Yesterday it stopped working along with no lights on the selector buttons. I have reset the circuit breaker ( which did seem to not be off at any rate). It seem not to be getting any power if it's not the circuit breaker what else could cause this?


... Bosch Dishwashers

The dishwasher seems to have no power. Fuses and breakers were checked and are ok. Is there a hidden breaker on the dishwasher?


Hi,\015\012There are no hidden breakers but the Electronic Control Board can fail and kill everything like you are experiencing...................\015\012\015\012Here is the part you need to get your dishwasher working agian... ... Whirlpool GU2700XTSS / GU2700XTSY Built-in Dishwasher

The pump doesn't seem to put out enough water pressure to turn the various revolving heads/nozzles in the washer - all washing heads are operable (ie unblocked) while the S shaped nozzle at the base and the small round nozzle at the top/ceiling of the cabinet do revolve slightly or slowly - but the two main nozzles spout water but not enough to revolve Is this a defective pump or a partially blocked pump ? - or something else - I have checked everything else and they appear to be functioning


It will be helpful to know the make and model number of the dishwasher to diagnose the problem you have.\015\012\015\012Generally this is attributed to a blocked chopper assembly in the wash circuit but hard to be sure if your model has o ... Dishwashers

Our dishwasher just died. It quit. the lights on the top won't come on and when you push them, nothing happens. It started and ran fine earlier, and when my wife checked on it...it was dead. There is a little bit of water in the bottom that didn't drain. What is the problem? Also...I checked the breakers and they are all good. Tom


I would check if your getting power to the motor ? Follow the electrical cord that you plug into the outlet you will have to take the cover off.Your going to have to use an electrical tester follow the cord all the way to where the wire connects.( Ma ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Hello, My GE dishwasher stopped draining. Model Number: VSD2304JOOWW I emptied out the dishwasher of the liquid, removed the cover and checked the filter. (Didn't look bad.) Checked the drain pipe under the sink and there was a little debris (slime) but very minimal. The garbage disposal was installed at the same time as the dishwasher 3 years ago (brand new place). What else could it be? Any advice would be helpful as my new home seems to be falling apart and it is getting pretty e


Drain pump either disconnected or jambed ... GE Profile PDW8400J Built-in Dishwasher

I have a Kenmore Elite Dishwasher Model 665.13773K600. It seems to have no power to the touch pad (top) control panel. I have already checked the circuit breaker and the power to the dishwasher. A friend said that it may perhaps be the thermo fuse cut out that needs to be replaced. 1) Is this true? 2) How can I remove the 1" thick control panel touch pad after removing the six screws- it seems to be stuck, and I don't want to break the plastic touchpad.


... Kenmore Dishwashers

I have a GE Quiet Power 3 dishwasher that was working fine last week. Over the weekend I ran it and we could hear a banging noise, so my boyfriend opened it three or four times in a row (during the cycle) to figure out what it was. The fourth time, it went dead. I checked and it had tripped the breaker. I reset the breaker and the dishwasher seemed to be working again, however the lights on the front were flashing (they hadn't previously), and now it will run for about 10 minutes but no water ru


Were you able to figure this out? We have the same problem here! ... Maytag Dishwasher

My Whiripool gold (Model Number)gu1200xtkso Does not drain - Everything else works fine but when the cycle is over the water is still Present. I dont know how to unscrew anything. I cant seem to find what to take off.. seems in possible to even check help....


... Dishwashers

I have a Kitchenaid Dishwasher model #KUDP01FLSS5 The problem I am experiencing is no lights or seemingly any power to the console. I have already checked the breaker and this seems to be OK. In reading other posts, I am starting to think that I need to reset the console but am unsure how to proceed. Any assistance is much appreciated.


... KitchenAid 24 in. KUDP01FL Built-in Dishwasher

I have a Bosch SMU2046Uc/14 about 15 years old. Sometimes it works, sometimes not, for the last couple of months. Now it has stopped working completely as if no power. Checked the breaker. Another problem - one of our kids just today jammed the door lock on it and we cannot get the door to latch at all. Can you help with any one of these problems? How do you fix or reset the door latch??? What else can we check to troubleshoot the dishwasher? Thanks!


... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

The machine does not seem to rinse properly. We have checked the water fill level, water temperature, spray arms are not clogged, have determined it is not a hard water problem and have tried Glass Magic and CLR to verify the lattter. What else can we check to stop getting a film on everything in the machine? Plastics come out terrible, glasses and dishes foggy and sometimes still greasy. The model # is GU2700XTSY0 from the Whirlpool line of Quiet Partner 4. Any suggestions would help. Thanks!


Too much detergent; not rinsing well; hard water... There is an acid wash to revamp glasses/ you'd need to google it... ... Whirlpool GU2700XTSS / GU2700XTSY Built-in Dishwasher

The machine has suddenly stopped cleaning properly. I put a cleaner through every few weeks and the inside is clean. I have blown through the pipes and they seem to be ok. I have removed the arms and filter and all seem to be free of debris. Not sure what else to check. Are there any filters behind or underneath the machine?


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Neff 24 in. S4443 Built-in Dishwasher

My GE Profile dishwasher which may be 10 years old has worked perfectly until today. We push start and nothing happens. We have checked the breaker box and all appears fine. What else should I check?


Check for a blown fuse or ... Dishwashers

My dishwasher is not quite 2yrs. old and has always worked great until now. Top rack cups and mugs still are dirty inside from coffee, lipstick, etc., glasses have spots and are cloudy, and silverware seems to have streaks and become darker. I always turn hot water on at faucet prior to running dishwasher. I have check the water faucet and it is 120 degrees. After starting the dishwasher I checked and the water is not even 100. After about 20 mins. the water was aprrox. 117 degrees. The


Hello,Welcome to FixYa,Based on your description I`d suspect a plugged wash pump.The place to start for that is to pull the pump filter, spray arm and check for food deposit, broken glass, undesolved detergent and ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

My dishwasher doesn't seem to be letting the jet dry out to the dishes. The silverware and the glasses seem dull and spotty and when I checked the jet dry it is still completely full. I haven't added any in quite some time.


The problem is hard water. Go to www.dishwasherfilter.com. They have a new product out that solves this problem once and for all. It filters the water entering your d ... GE Nautilus 24" Built-in Dishwasher

Hi, My EdgeStar dishwasher suddenly started leaking during the draining process ... looks like a sprinkler down one bottom side. I've removed the hoses to check for a blockage, and checked the screws on the bottom, and those all seem OK. What else can I do? Any helpful suggestion is most appreciated. Liz


Www.edgestar.com/ownersmanuals/DWP40Sownersmanual.pdf - United States\015\012\015\012\015\012\015\012Above is your user manual, below, is the support website for Edgestar.\015\0 ... EdgeStar DWP40S Free-Standing Dishwasher

I'm not sure exactly what has happened, I washed a load of dishesand everything seemed fine, but when I went to wash a load yesterday, my Kenmore Ultra Wash III, Model # 1677990simply would not turn on and I found water in the bottom. I checked the house circut breaker and it is fine, is there a fuse or breaker on the machine somewhere? Please help!!!


... Kenmore 24 in. 15932 Built-in Dishwasher

Nothing lights up. seems like no electricity. checked breaker in breaker box, not tripped.


Hi.If possible use an extension to test the appliance on a different main socket , or test the socket using a different device. In any case check power cord connection.If main is OK replace the ... KitchenAid 24 in. KUDK02CRBS Stainless Steel Built-in Dishwasher

Unit went dead. There is no power (electric) to it. I checked the circuit breaker and even changed the breaker, but no power. Removed the bottom foot panel and did not see any reset button. I don't know what else to look for.


The electronic control board has failed & needs to be replaced,by someone who knows what there doing.GOOD LUCKECO KIZZA ... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

No power to dishwasher; checked breakers they seem


You need to check the power only:\015\012 1- check the power come to the wall right ,if not\015\012get elecricity man to bring it to plug in the wall\015\012 2- check the cord o ... Whirlpool Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1051 seconds