Having problems with your Dishwashers ?

I need the hose adaptor that is attached to the

\015 I need the hose adaptor that is attached to the hoses on the dishwasher that lets water in and out of and attatches to the faucet\015

Answers :

Try AppliancePartsPro.com You will need your make / model #
Are talking about a washer,or a dishwasher?
\015\012if its a washer you are talking about a faucet adapter. you can get this at any plumbing supply. or put in model at sears direct parts.com and you see the pic of unit and parts. only model#needed. let me know if this works.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need the hose adaptor that is attached to the


Try AppliancePartsPro.com You will need your make / model # ... Dishwashers

We're trying to install our dishwasher and there is a 3rd hose attached on the side. It appears to be a drain of some kind, part number, we think, printed on it is FRU 10967 19/07/04 08:33 Can you tell us what it is and where and how to attach. The one it's replacing only had the water hose and the drain hose, no third hose. Thanks


I just installed my Bosch dishwasher a few days ago and wondered about the same thing. The instructions for hooking up water supply and drain lines did not mention this third hose at all. \012\012However, 'the third hose' (which appears open on ... Bosch 24 in. SHU43 Built-in Dishwasher

Bought suction hose for karcher in order to use water from bucket. Have attached hose but there is no water being sucked from the bucket . One side of hose attached to washer the other dropped in bucket is this right? The end in the bucket has no suction, and a depressable valve that seems to be impeding the water suction. Do I remove this valve ?


... Karcher 26408500 Pressure Washer 25Foot ExtensionReplacement Hose

There are two hoses coming from my Bosch SHE45M06UC dishwasher. One is obviously the drain coming from the back of the unit, and the other is attached to the side looped and not connected to anything. I went online to the Bosch website for a installation manual and it describes this hose as a air venting hose. Does the end attach anywhere or does it just hang loose on the unit. My husband detached it from its original position and thought it was part of the water line. HELP!


Many people realize the dishwasher connects to a little hose on the sink, it is called an air gap. However, many people wonder " The air gap is there to prevent the water from being siphoned out of the dishwasher. When water flows through the drain ... Bosch Dishwashers

Installation we have two loose white acordian type hoses, one attached to the side of the unit and the other comes from underneath. Do we attach both hoses to the drainage under the sink, and if not where does the hose go that does not go to the drainage under the sink?


It sounds like you have connected your dishwasher to a garbage disposal.\015\012\015\012\015\012The 2 hoses provided with your dishwasher connect together. \015\012You run the drain hose through ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

We just hooked up our old built in GE dishwasher and the water is shooting out the left side of the unit where the black water hose enters the tub. Shouldn't the water be entering into the wash arm? The hose isn't clogged. It attaches to a white plastic piece that is part of the unit itself. The water is entering both the tub but also shooting out of 2 slits approx 1 1/2" each. located right below where u attach the hose.. Any help would be greatly appreciated!


... GE GSD5130 Dishwasher

The top spinning paddle on my simpson silencio dishwasher 950 came off. I was able to re-attach it but I notice that there is no hose for the water to enter the top paddle from - can someone please tell me where this hose would go and where I should be looking. There is an opening at the top of the machine but no attachment from there to the top paddle. thank you.


The end of the spray arm should plug straight into the hole at the back of you machine when you push the top basket in. ... Dishwashers

I am reinstalling after a remodel. there is a hose on the side that is attached to the dishwasher but the opposite end is not attached. Wher does this hose connect to?


... Bosch 24 in. SHX33A02 / SHX33A06 Free-standing Dishwasher

The quick connect attachment on the hose is leaking when connected to the machine. I would like to take off that attachment and replace it with a standard connector similar to a garden hose. How do I do this.


... Pressure Washers

Low Pressure with no hose attached, pressure is good, attach hose without wand and pressure drops 50%. Have had pump apart 10 times, have checked bypass valve, have even removed bypass and filled passage way so water could not bypass wihout any change. Am down to thinking pump casting is cracked allowing bypassing to happen. Does each of the three piston chambers have a check valve so one piston is not pumping back into another piston chamber?


I worked at a tool rental while attending college and had the opportunity to work on a variety of pressure washers, however, they were of the commercial type. Commercial washers are slightly different in that they usually have seperated components fo ... Karcher 2500 PSI Pressure Washer

My portable dishwasher hose that attaches to the faucet is to short for where I want my portable dishwasher to sit. I would like for it to sit in one spot. I am not allowed to alter or cut holes in the side of cabinets, I am renting. Is there an extension for the hose to the faucet? If not, what can I do to make the hose longer? If I really have to I will cut the two hoses that comes from the dishwasher to the faucet, but I would rather have an extension first.


You should be able to find extension or replacement hoses that you can use to extend the existing hoses at a hardware store. If you need to join two hoses that have female connectors, adaptors with two male connections are available. ... Dishwashers

I just had a Haus slimline dishwasher delivered and have tried to set it up. I have followed the instructions to the letter but the water inlet hose keeps leaking out water when you move the dishwasher into place after attaching the hoses. I have tried the manufacturer's hose they provided and two spare i have in my cupboard. I even went out and bought some 3/4" washers and added extra washers to the inlet hose, but it still leaks. What is wrong?


It is possible the dishwasher inlet is set for low water pressure.\015\012\015\012Check the water pressure setting matches your inlet water pressure.\015\012It might help if you provide the model number of the dishwasher. ... Dishwashers

During installation of new dishwasher when I was attaching drain hose to pump I saw a small red rubber fap attached to end of pump discharge nozzle. Is this a backflow prevention or something to keep


It is a back flow preventer. Leave it alone and attach the drain hose. ... GE Profile PDW8400J Built-in Dishwasher

Soap feed The soap feed hose on my Karcher 2650 does not suck up the soap into the washer. I pulled off the connector piece that the hose is connected to. I can blow through the hose. There is a little metal finger thing that you can tell pushes up into place when the water pressure is high. It seems like it is supposed to drop down and allow some soap through when the water is running. I found a loose(attached to nothing) gasket, looks like a little donut. It was just free floating in t


I fixed mine works good too, watch my video step by step i put it on youtube ... Karcher G2650HHR Gas Pressure Washer

I OWN A COLEMAN 1500 POWERMATE POWER WASHER. AND NEED TO PURCHASE EITHER AN EXTENSION OR A NEW HOSE AND WAND COMBO OF 50 FEET. THE REASON BEING THAT I AM HAVING DIFFICULTY WASHING THE UPPER PARTS OF MY 3 LEVEL HOME. THE HOSE ATTACHMENT IS A TWIST/TYPE AND THE WAND/HOSE IS ALL IN ONE. CAN ANYBODY GIVE ME A RESONABLE AND ECONOMICAL SOLUTION. ALSO WOULD THE ADDITIONAL HOSE HAVE ANY NEGATIVE IMPACT ON THE WASHER AND ITS CAPABILITIES? THANK YOU IN ADVANCE


Here are a couple of links to the stuff you need:\015\012\015\012link 1\015\012\015\012 ... Pressure Washers

Bosch SHU992SUC Dishwasher does not drain. It's not clogged in the external hose, the filters are not dirty. I moved the Dishwasher outside and ran it with the input attached to the garden hose and the output drain hose laying on the ground so there is absolutely no chance of restriction due to the way it's plumbed in. This model does not even show up on Bosch web site. I guess I have to start taking apart the machine blind with no service manual. Ideas? It's less than 10 years old I think. M


PUT THE MACHINE IN DRAIN MODE IF YOU DONT HEAR A HUMMING NOISE THEN THE DRAIN PUMP IS BAD. CHANGE YOUR DRAIN PUMP. ... Bosch SHU9925UC Built-in Dishwasher

Pressure hose wont stay attached to karcher unit


... Karcher K3.540 Electric Pressure Washer

GE Mod # GSD22360Z04WW will not drain water. I manually pushed the solenoid down and the pump and motor seemed to run. No water pumped out of the hose that was disconnected from the garbage disposer. I have discovered that the plug for the disposer was not taken out where the dishwasher hose attached. The dish washer stopped working after a new disposer was installed. I rotated the control knob and at no time did the solenoid for the pump operate. It went back to normal position after control kn


... Dishwashers

I have a maytag portable dishwasher purchase it 14 months ago, the hose that attaches to the faucet leaks and wont stay connected, is it worth buying a new hose?


You need to replace the faucet adapter ... Maytag MDC4650AWB 24 in Builtin Dishwasher

The rubber hose from the solenoid to the rectanglar shaped box on the side of the unit where the water goes into the unit. the rubber hose has water comming out when unattached for the side of the unit, however when reattached water gurgles and sprays out of the rectangular shaped box that takes the water into the unit. unit seems to operate fine, just leaks really really bad from the attachement point outside unit.....


... Whirlpool 24 in. DU927QWD Built-in Dishwasher

Pressure Once I have the powerwasher started and going (water to it before starting) i can't get it to go to full pressure it will prime up like it's going to go to full pressure give me just a shot of full pressure then go back down to probably half pressure and remain there then prime again for a second then back a coninues cycle! Maybe there's a seal or something somewhere I should look at. Hose and pressure from house is good, the seal whee the hose attaches to the bottom of the washer is ne


This is usually a problem with the "dump valve" defective in not being able to hold the pressure but only able to release it prematurely as it should only do so when to much pressur is built up inline. Only recommend qualified pump tech. But check pu ... Coleman Pressure Washers

Bosch SHX45M05UC/48 I'm trying to install my dishwasher....but, the hose attached to the right side of the dishwasher looks like it should be connecting, at the other end, to another place within the dishwasher. I can't figure out where it connects and I'm sure I shouldn't have two drainage hoses. Help. mm


... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

I just bought a simpson silenco 850 dishwasher & my son picked it up & took it to the property to install it .He said the waste pipe hose was missing the rubber end with the silver clip to hook on .Do I need to buy a new hose or could I find another rubber piece to slip over & re-attach the clip? Thanks


... Dishwashers

My Whirlpool Gold Model #GU980SCG52 is leaking on the outside of the Water inlet. The hose is attached on top, but the water is leaking out of the opening on the front side under the hose.


HI. this is a inlet assembly issue. The water inlet valve can be identified by the water hoses connected to it. One hose will lead from the valve to the pump/motor assembly in the center of the dishwasher. Check that the hoses are securely connected ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Hose problem I am trying to find the end attachment for the hose it broke off


... McCulloch FHH18A Electric Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0450 seconds