Having problems with your Dishwashers ?

My 20 year old dishwaher just broke its lock. Somehow it seized when I locked the door. My husband took it out but we still cannot open its door and take out the dishes. The handle fell out when he tried to open it. How can we access to open it?


Answers :

YOU HAVE ELIMINATED THE EASY WAYS, ARE YOU PLANNING ON REPLACING IT OR REPAIR, IF REPAIR CALL A TECH. IF REPLACE, THE LOCK MECHANISM IS AT THE TOP CENTER OF BODY. ACCESS WOULD REQUIRE REMOVAL OF D/W, AND ASSOCIATED CLEAN UP OF THE WATER LEFT. JUST REMEMBER THAT YOU HAVE BREAKABLE DISHES INSIDE. WHEN YOU PROCEED. YOU MAY UNPLUG AND REMOVE THE SIDE SCREWS AND SEE WHAT IS EXPOSED WHEN YOU REMOVE THE BLANK FRONT METAL PIECE.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My 20 year old dishwaher just broke its lock. Somehow it seized when I locked the door. My husband took it out but we still cannot open its door and take out the dishes. The handle fell out when he tried to open it. How can we access to open it?


YOU HAVE ELIMINATED THE EASY WAYS, ARE YOU PLANNING ON REPLACING IT OR REPAIR, IF REPAIR CALL A TECH. IF REPLACE, THE LOCK MECHANISM IS AT THE TOP CENTER OF BODY. ACCESS WOULD REQUIRE REMOVAL OF D/W, AND ASSOCIATED CLEAN UP OF THE WATER LEFT. JUST RE ... Dishwashers

The door handle is broken which enables the opening of the door. Therefor we can't open the door and need to replace the handle but dont know how . The handle is situated inside the door and there are no screws around it to to take it apart. It is an Indiset DG5000 model. There are screws at the edges of the door.


I had a similar problem with a similar model.\015\012Insert a fine screwdriver into the small space immediately abive the handle. Press the inside end down firmly and the lock should release.\015\012I ran mine for about 3 weeks, this wa ... Dishwashers

My dishwasher handle is broken and i can't open the door, it is bolted to the counter and i can't unscrew it to pull it out because i cannot open the door


Even with a broken handle, you S H O U L D be able to press the Open latch with a screw driver (flat blade).\015\012If that fails, you can use the screwdriver to force the fastening screws out of the underside of the cabinet (or use a hack saw ... Dishwashers

Model no. MDB6100AWW. Just unloaded the dishwasher. Shut the door and immediately heard clicking (regular cadence). All indicator lights (arrow-shaped) for clean, dry, wash and heating delay were blinking. Opened the door, waited a few minutes, closed the door. Now, just the "Clean" and "6 Hour" arrow indicator lights and "Heated Dry" button light indicator are still blinking continuously. Cannot override. What's going on? Dishwasher came with the house when we purchased it 6 years ago. Proba


Hi Thanks for using FixYa. To resolve this you will have to reset the console. Do this by closing the door and press these buttons in sequence...-high temp wash-heated dry ... Maytag 24 in. MDB6100A Built-in Dishwasher

There was no category for general home repair or locksmith services, so I hope someone can help me. The doorknob on my master BR closet is broken... the knob will turn but nothing happens. The door opens into the closet, so I cannot access the screws or the door hinges on the inside of the closet. The molding on the bedroom side of the door prevents me from sliding a credit card to move the latch. The knob has no lock, just a flat surface on the knob, but other bedroom doorknobs have a small acc


I used a hatchet. You have to replace it anyway. ... Dishwashers

Dishwasher handle The handle that opens and closes the dishwasher door still works but is very loose. quit


There should be a slot for an allen rench on the under side of the handle that will tighten the handle up. ... Dishwashers

Hi. We have a Bosch 4072 6301 which is about 9 years old and has always worked well. Recently is has begun to leave dishes unclean, particularily on the top shelf but also on the bottom. I have checked the water jets for blockages, checked the drain (as far as it is accessible). The heating element stills works as there is steam when the door is opened. If I open in the middle of the cycle I can see water coming out of the jets correctly, I can't tell if the pressure is correct. Any th


... Bosch 24 in. SGS4072 Free-standing Dishwasher

Indesit d63 dishwasher, door locked shut. took top off+got to latch, the plastic catch wouldn't pull out of the latch. undid it all, all seems unbroken but cannot seem to arrange the latch so that it will allow the plastic catch to come out when levered. also not sure if the handle is supposed to click the switch to another position, or just tweak the switch as it opens the door. is a new latch supplied with the switch ?


Check with whoever you order the latch from, usually parts are individual for electrical parts and never assume that the screw or washer will come with new one, save every piece. ... Indesit 24 in. D63 Free-standing Dishwasher

Mod #: MDB6600AWB Ser #: 16505148CG No water comes out of spray arms, checked and cleaned filter-OK. Wash impeller is cracked where it slides onto the hexagon rod but it you take the filter flow plate off and put the impeller back on, when you put the unit on rinse only and quickly open the door you can see it is still turning and moving the water. The unit still fills and drains. it just does not have enough force with the impeller to force the water into the spray arms.


Hi,\015\012 \015\012Please check the bellow link regarding your query....\015\012 \015\012 ... Maytag 24 in. MDB6600A Jetclean II Built-in Dishwasher

1991 Tappan dishwasher door has come unhinged but still works. The door just feels heavy when I open it. It will take several hours to fix. Should I just replace the whole unit? I don't know what the lifespan of dishwashers is


It may actually be a simple fix. There are generally 2 screws at the top of the unit that hold it in place you may have to also adjust the front legs down. The whole unit should slide out a little without having to unhook anything. If it is a copper ... Tappan 19 in. MDS251RE Free-standing Dishwasher

Machine cannot finish cycle and is stuck in pumping out mode. Only tiny amount of water in drain basin at bottom, no excessive water. Was set at 10pm, still attempting to drain 8am! Has no diagnostic dials or manual over rides so continues on whether door is open or closed, even if I switch off and on again. Possible related issue, recently finish at end of washes has been "grainy", far from perfect, surfaces slightly sandy feeling.


... Bosch 24 in. SGV43A03 Built-In Dishwasher

Put dishwasher on and 3 hours later went to unload. opened door to find END light had not come on and both 55 degree buttons were lit (I'm sure I only depressed middle 55 degree button button), 65 degree button was unlit. There was still some water in the bottom of the appliance. went through the procedure in the manual but cannot change the current state of the appliance i.e. the 2 lights on. HELP PLEASE! Model is TECNIK FD7811


... Tecnik Dishwashers

Hoover HED 6612/1-80 dishwasher all four lights flash and beep whilst the machine drains, after a couple of minutes the beeping stops but the four lights glow. Cannot reset to cancel. Also still makes draining noise whilst the door is opened. There is no water at the bottom of the machine


Not sure if you have got a user manual for this dishwasher. You can download one from this site.\015\012\015\012You have a flood situation ... Hoover Dishwashers

My dishwasher is a KitchenAid Sculptura Model KUDR24SE or KUDY24SE according to my manual. I cannot open the door. The release handle seems to be loose from the latch.


... KitchenAid Dishwashers

Our Bosch SGS 53E02 AU/30 Dishwasher has the Tap Light on all the time while the Dishwasher is filling up. It appears as though water cannot get through and takes a long time to fill. It also does not allow the wash cycle to start and the powder door does not open. Can you also get any Service manuals for this model?


... Bosch Dishwashers

SGV53E0GB/56 Machine still activates when door is open. Will pump out water but will not take any in. Makes water sucking noise.


... Bosch Dishwashers

I have a Nobel dishwasher. After a wash this morning the door handle now does not work and I cannot gain access to empty. Any suggestions as to how I get into the machine!


... Jenn-Air 24 in. JDB1090AWS Stainless Steel Built-in Dishwasher

Door handle is locked in place and cannot open


Need more information, make and model , type of handle. I've seen a few stuck handles, one of them someone glued shut. ... Dishwashers

Takes more than 2 hours to complete a one hour cycle. Will sit on "1" minute left for the last 45-60 mins. If the door is opened during this long one minute the washer still has water in it and will reset to 13 mins remaining.


Hello,\015\012\015\012Welcome to fixya.\015\012 \015\012**What I`m about to share applies to Almost all Electronic control B/S/H/ dishwashers. That includes Bosch, Thermador ... Bosch SHU5315UC Dishwasher

My dishwasher is a kitcheaid scuptura model KUDR24 OR KUDY24SE. I cannot open the door. The releae handle seems to be loose from the latch.


... KitchenAid Dishwashers

Tricity Bendix DH090 water valve closes too early. Insufficient water causes program to stop before first heating cycle. If I switch off, open the machine & pour an extra pint of water in, shut the door & switch on again the wash takes place and completes perfectly to specification. OK so the problem seems to be that level detector No 1 switches off the water inlet valve early and level detector No 2 (apparently) halts the cycle since it detects insufficient water in the machine. I cannot see t


... Tricity Bendix 18 in. DH090 Free-standing Dishwasher

Hoover HEDS 668 dishwasher all four lights flash and beep whilst the machine drains, after a couple of minutes the beeping stops but the four lights glow. Cannot reset to cancel. Also still makes draining noise whilst the door is opened. There is no water at the bottom of the machine.


... Dishwashers

Hoover HEDS 668 dishwasher all four lights flash and beep whilst the machine drains, after a couple of minutes the beeping stops but the four lights glow. Cannot reset to cancel. Also still makes draining noise whilst the door is opened. There is no water at the bottom of the machine.


... Dishwashers

Have the Kenmore Limited Edition dishwasher, model # 665.15892100. When dishwasher is running, you can hear the soap container flip open. However, @ end of washer's completion, and main door is opened, the soap is still in the container. Some has leaked out, but the majority is still in the container. Dishes are still dirty, so it appears that either there is no water to disperse the soap, or does the door really open? Any ideas?


Check the wash arms to see if food has not cloged the holes stopping water getting through\015\012if these are clean the machine may not have enough water entering machine\015\012also check how you stack machine ... Dishwashers

Frigidaire model F71C12PHS0 is not washing, it goes through the cycle and when the door is opened the soap container is open with soap still in it. We have run it with the door open to see if it is spraying and it is. The heat is working because when we open it at the end of cycle it is hot. Yet soap is still there and dishes are not clean. Thanks to anyone who can help me trouble shoot this.


... Frigidaire 18 in. FDR252RB Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0871 seconds