Having problems with your Dishwashers ?

Whirlpool dishwasher: two loose wires need to be reconnected. Unable to determine which termings to reconnect the two loose wires.


Answers :

If both wires go too the same switch/componet and these are the only two wires that connect to this componet it doesn't matter which wire goes where.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Whirlpool dishwasher: two loose wires need to be reconnected. Unable to determine which termings to reconnect the two loose wires.


If both wires go too the same switch/componet and these are the only two wires that connect to this componet it doesn't matter which wire goes where. ... Dishwashers

Need the wiring diagram for the front panel/door of the dishwasher. The wiring diagram in the owners manual does not provide adequate description of which wires connect where. My problem is that, in taking off the door, two wires became disconnected and I cannot tell where they should be reconnected. I called Viking and they are unwilling to provide this (they prefer I call an authorized repair person). Does anyone know whether a repair manual exists for this and where I might get ahold of one.


This is all I could find go to this address www.specsserver.com/CACHE/FILE5412.PDF at the very end is wiring diagram but its not in detail ... Viking DFUD042 Built-in Dishwasher

My Whirlpool ADP7000 dishwasher is not washing properly and is displaying E3 which is a heater element problem. I opened the front cover to have a look and some wires came loose, so now I also need a


... Whirlpool Dishwashers

We need to connect it back to the built in wires in the dishwasher. We need to know what colours or wires connect to the flat gold metal plates, there is a black plastic case that slips on and then 3 plates underneath and on the top, but not quite sure if that is correct. Then there is still wires that are loose that need connecting. Part NO. C00059727 Copreci - Merloni 1 160010266 TD02 0008


... Dishwashers

KitchenAid dishwasher Hi I have kitchen aid kds 20 dishwasher around 25 years old it has a broken motor and I was trying to put a new motor in it,the old motor has 3 wires white,black and ground but no extra startrelay. the new motor (partno: 4171686 from whirlpool) has 4 wires white,black , yellow and ground , also in package was startrelay but no wiring info for this motor. I Need wiring info if someone can help. Regards. Bjorgvinj


... KitchenAid Dishwashers

My Indesit dishwasher needs to have the micro switch aquastop replaced but not sure which wire goes on which contact on the switch. Two wires , one pink and one brown.


... Indesit 24 in. DI67 Free-standing Dishwasher

I have a kitchen aid dishwasher model number KUD101TJBLO. I have had the thermal fuse replaced numerous times. It may run two weeks ir it may rub two cycles then the fuse blows. My serviceman has given up on finding a solution.He has replaced the control board and the door switch. However it continues blowing the fuse. I read on the internet that you need to replace the entire wiring kit that comes with the fuse but my repairman says this will not fix the problem and refused to replace the kit.


Hi\015\012\015\012\015\012Thanks for using FixYa. Please check for the short on the wires near the heating element. Also check the resistance of the heating element, it should not be more than 1.6 K ohms. Also ma ... KitchenAid Dishwashers

I have a Bosch dishwasher, model SHU9915UC/U11. The spring mechanism on the detergent door cracked, and I bought the part to replace it. I took the front cover off of the dishwasher to determine how to replace it. Two white plastic "things", maybe spacers, fell out. I need 2 things: a) how to gain access to the spring on the detergent door so that I can replace it, and b) how to put the door spacers back on. An exploded parts view would probably help a great deal. Michael J. Orr


Hello! This is Guru...Saailer...I have your information...Due to size limitations I'll need your e-mail address in order to send it to you...Send an e-mail to me and I'll send an exploded view diagram and parts list...Guru...saailer... ... Bosch SHU9915UC Dishwasher

I NEED A WIRING DIAGRAM FOR A WHIRLPOOL DISHWASHER MOD DUC600XTS7 AND FOR SEARS DISHWASHER 665.16572202


Hi. Ok, I have located the diagrams you seek. I will post two links below to the diagrams.DUC600XTS7 ... Dishwashers

I purchased a Whirlpool dishwasher # DU945PWSQ0 from Lowes Hardware. I don't see this model number listed but I need help just the same. There are two plastic bags containing insulation that were tacky glued to my dishwasher. I don't know if they are packing materials or should they be left intact.


That is insolation it stay's on ... Whirlpool GU2400XTP Built-in Dishwasher

I have a Whirlpool dishwasher DU800CWDB4. Two plastic pieces ended up on the bottom of the dishwasher one day. I have determined that they are the upper 2 pieces of the lower spray arm tower. I can't figure out how to get them to fit back on correctly.


... Whirlpool 24 in. DU800CWD Built-in Dishwasher

My dishwasher did not come with power cord. what kind of cord do it need and how do i connect the cord? On the new cord how will i know which one to connect to the white and black wire? The dishwasher is Whirlpool model du930pwsb, Sku numbmer 451-5344.


120 Volt 16 gauge, 3 wire power cord.\015\012\015\012Brass Screw is Black, White Screw is is Common, Green is Ground....Try Home Deport for a cord. If no screws are on the dishwasher, use wire nuts and elec. tape ... Whirlpool 24 in. DU930PWP Built-in Dishwasher

Need wiring diagram for whirlpool GU1500XTLS0 dishwasher


... Whirlpool Dishwashers

I purchased a diswasher (Hotpoint)about 1-1.5 years ago. It's model # is HDA3400G02CC and its SS# is TH887451Y. I don't think I registered it. No Matter, Two days ago, my garbage disposal stopped working. I checked the outlet. It had power. The switch to the Disposal was next to the outlet. I assumed that the switch was wired from the outlet. It wasn't. Bottom line, the switch nut was loose. I tightened it and problem solved. When I turned on the dishwasher, nothing happened. It acts like


I purchased your service (telephone support) and the dishwasher expert contacted me. We discussed the issue, he made recommendations. I followed his advise and solved the problem. Before I could recontact him, he called to follow up on my progress. ... GE Dishwashers

Water level leaking need wiring diagram - Whirlpool 24 in. ADP6940 Dishwasher


... Whirlpool 24 in. ADP6940 Dishwasher

Need to find a new door control panel for whirlpool adp530 18 ins dishwasher control dial fixing broken.dail loose


... Whirlpool 18 in. ADP530 Free-standing Dishwasher

Jdb2100aws dishwasher - door handle fasteners loose, handle ready to drop off. This is a dissambly question: The middle section of the door has an upper one-third (which contains the input switch strip) and a lower two-thirds; the upper section must be removed to tighten the door handle fasteners. After wiring is disconnected (yes, power is OFF), the upper section appears to be held to the shell by some kind of barbed fastened from the inside, run through a tab on the door shell and into a fema


After removing the stainless cover l tried to disassemble the door further but found it difficult, there is a hard thick plastic cover, i took my dremel and cut a small hole large enough for a wrench to fit and tighten the thin nut on the handle, lin ... Jenn-Air 24 in. JDB2100AWS Built-in Dishwasher

LG dishwasher quit mid cycle. no power to the front panel. I drained the water and found a two pronged wire by the drain hose disconnected. reconnected it and I still get no power on the control panel


Here is the video for you its intresting to get it repaired V ... LG Dishwashers

Remove the lower wash arm (1) by turning the nut (4) clockwise (right) lift the arm off, there is a bearing (3) (small thin plastic washer) under the arm, be sure not to loose it. Lift the tab on the back of the feed tube cap (2) and swing it to the right and lift up, this may need a bit of pressure to release it This is for my Whirlpool dishwasher DU1100XTP. I'm putting it back together and can't remember if the plastic washer goes on top or underneath the feed tube cap. Also how do I remo


This is not a tuff job plastic washer goes on top . and torx screws . you use a proper torx tip for the screw size . ( you can go to sears parts .com and put in model # and see a good break down of the wash arm s and t ... Dishwashers

I was given a dishwasher and need to know how to install has only two wires


The wires on the Dishwasher should be Black and White\015\012\015\012Black Wire is the Line or HOT Wire \015\012\015\012White Wire is the Neutral Wire\015\012\015\012Green Wire From the House goes to the Frame of ... Dishwashers

Whirlpool dishwasher model# GU2451, two years old. On any cycle, it counts down to 44 and won't go any lower. It sounds like a motor is constantly running when it hits 44. It will continue like this until I shut off the machine. What needs to be fixed?


Hi,Go to the house breaker box and find the breaker for the dishwasher.Turn the power off form the box for 10 minutes and this will reset the system.This should usually clear any electronic glitches and enable you to start. ... Whirlpool Dishwashers

Which of the two wires conecting power cord in dishwasher is the hot wire


... Kenmore Dishwashers

Need to know how replace a 3 prong plug on my dishwasher model # fdb1050rem0 frigidaire dishwasher the wires on dishwasher are white,black,red wires on 3 prong are green an 2 white wires


On libnk below tells you how to change the plug. Step 8\015\012\015\012http://manuals.frigidaire.com/prodinfo_pdf/Kinston/15442730 ... Frigidaire Dishwashers

I have a frigidaire dishwasher model fdb750rcc1. The wires somehow came loose while trying to fix the handle. I found a place for each wire via the wire diagram, however there is a green wire loose and I cannot figure where this wire goes.


... Frigidaire 24 in. FDB750RCC Stainless Steel Built-in Dishwasher

I am installing a dishwasher. When I went to wire I had only two wires a white and blue comming through the house wiring and a white and black from the dishwasher. Does blue go to black. White to white and how do I gound it Thanks George


If you have a volt/ohm meter you can check for Power on the Blue wire. Or you can open the face of your fuse box and look to make sure the Blue wire is connected to the fuse. If it is, just hook up your Black from dishwasher to the blue from house. ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2562 seconds