Having problems with your Dishwashers ?

Often the dishes are coming out with dried on food. tried using different dishwasher soaps, using jet dry - we are no longer using the machine because we can't tell when this is going to happen. dishwasher repair guy - said nothing is wrong with it. Densan


Answers :

You can't put a cake in the thing like the maytag commercial, - DUH - . try to rince the dishes or even scrap them into the trash can, or if you have dogs, well just a thought. Good Luck!
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Often the dishes are coming out with dried on food. tried using different dishwasher soaps, using jet dry - we are no longer using the machine because we can't tell when this is going to happen. dishwasher repair guy - said nothing is wrong with it. Densan


You can't put a cake in the thing like the maytag commercial, - DUH - . try to rince the dishes or even scrap them into the trash can, or if you have dogs, well just a thought. Good Luck! ... Dishwashers

In the last month I have noticed that my dishes aren't getting clean. My dishwasher is less than a year old and has done a great job so far. I tried adjusting the amount of rinse aid and the amount of soap but nothing works. the dishes come out "clean" without food residue on them, but they are so cloudy that I don't want to use them. I will go back to handwashing and sell the dishwasher is this is the way it is going to be cleaning. (The repair guy said nothing is wrong with it.) It is mod


First I would run the hot water until hot. Then start the dishwasher on the longest setting with the dispenser door closed( no detergent). Then after about 10-15 minutes open the door and check to see if the dispenser door opened, it should have. The ... LG Dishwashers

I have gas in the oil fill and oil coming out of the exhaust of my Ridgid pressure washer. I lent it to my father who isnt mechanical at all so anything could have happened while he was using it. He has since passed away so he cant tell me if he did anything wrong to it. Its a Ridgid with a Subaru SP170 OHC Engine. Any help would be appreciated. Scot


Check to see if the oil is overfilled first.If the oil is at a normal level, the engine was probably overheated or ran low on oil.It is also possible that the machine was tipped over and oil ran into the cylinder. ... Pressure Washers

I have tall tub model: LDF7920WW. It is not drying thoroughly; the walls are full of condensation & dishes are damp. I operate the dishwasher late at night & unload the following morning. I am not sure if my dishwasher was properly hooked up by a reputable plumbing company in my city. The authorized repair service tells me the problem with my D/W is that I am not using a rinse agent. I do not use chemicals like these in my home, let alone on my dishes. Is this the only probability of my


... LG 24" XL Tall Tub Built-In Dishwasher - White

We getting the error message LE on the dishwaser model #LDF6810ST. The repair Official repair man that came out to supposedly fix the dishwasher called LG to find out what was wrong with it and they told him to tell us that we need to replace the motor and wiring harness and the Technician told us to order the "motor and wiring harness" charged us $100 and left and the dishwasher that is only 2 years old and we paid a little over $800 for is still broke. Now when trying to order the "motor and w


Motor assy pn# 4681ED1004A is the motor you will need. ... LG Dishwashers

I bought an IKEA Renlig DW60 dishwasher about 6 months - the controls are located on the inside top of the door. Ordinarily the dishwasher turns on and three red LEDs on the far right of the control panel light up. On occasion however only a single red LED indicating the temperature of the last wash I carried out will go on (it is always the 50 degree light as this is always the wash temperature I use). When this happens the dishwasher appears to be stuck and will not start when I shut th


Press and hold the cancel button for about 5 seconds. This resets the electronics and gets it going again ... Dishwashers

Hi, I have not use my GE dishwasher for over six months now. I just turned it on yesterday and discovered that the dishwasher will fill the water but then it does not go to the next step. I tried different dial cycle and nothing happens. I suspect there is an issue with the timer? What should I do to fix this problem? Thank you


The heating element has gone more than likely, check condition £25 to replace ... Dishwashers

The slide on the upper basket keeps falling out. It's been fixed twice but doesn't hold. The second repair man who put the slide back in the rollers said he couldn't see anything wrong with it, but it still didn't hold, so he called your tech dept. who said they had roller and slide kits at a total cost of $66 for this model. The slide kit had a new part number but the tech department didn't tell the repair man why they'd changed the part. The roller kit was one for dishwashers the sides o


One option is installing stainless steel washers on the rack supports that screw into the side of the tub. The rack falls down because there is too much "slop" with the rack...a couple small washers to space them tighter normally does the trick. ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Dishwasher ESF4150: What are the symbols indicating on the dishwasher? Star? scoop? Line with arrow from side? Half circle with 3 stream lines going up? What looks like a pan with handle or maybe something being poured into it? How do I use the button 3 in 1 as compared or in combination with other programs? Please if you can give me simple answers because I cannot get a repair man where I live and I have no internet or telephone landline. I live in a very remote area. Thank you.


... Electrolux Dishwashers

Smeg dishwasher leaking through the door ive removed the lower door seal but dont know how it should go on happened all of a sudden and there was a desert spoon in the bottom of the dishwasher . im hoping it leaked because it dislodged the seal the seal came out easily from the outside of the dishwaser. can any one tell me how to replace it and which way it is supposed to sit model number sa425 smeg


... Dishwashers

The power is going to the dishwasher. The on off buttons work. No error codes. The salt light is lite (has been for 5 years) but now I get zero response when shutting the door (after selecting any of the 6 run options). There is no noise, no water, nothing happens. How do I repair this dishwasher so that it will run again?


Door switch failure. This will shut down all other start options. Inspect and possible replacement. See if you can activate it with something with door open. Give it a good close look... ... Dishwashers

I have a whirlpool DWH B10W. Last week the main drain outside blocked and none of my service machines were working (not draining). The main drain has now been unblocked and every machine except the dishwasher are now working fine. The plumber has checked the drainpipes again and says all are now clear. When I try to use the dishwasher, after the initial drain it stops and starts beeping at me. I have also noticed that no water is going into the machine. What's happening?


The error most likely indicates a Long Drain Sequence (Drain Exceeds 8 Minutes) - Select 'cancel' twice to clear error code. \015\012 \015\012 \015 ... Dishwashers

Siemens dishwasher model SE24A232/43 When going thorugh the cycle it sudddenly stops - all lights go off. Sometimes it recovers (several minutes or several hours), sometimes it is neccessary to wait, open/close door and restart (sometimes it responds to this and sometimes not). Eventually after several such trials it completes the cycle. Control system was suspected, sent for check and repair but nothing wrong found with it. The "all lights off" symptom makes me suspect it is some kind of a


... Siemens 18 in. SF24A262 ExtraKlasse Free-standing Dishwasher

Dishwasher I turn on the dishwasher and all the buttons flash, (no noise) i can go through and try and select a setting but when i press start nothing happens the buttons just keep flashing? Do you have an instruction manual or can you tell me how i would get one?


What brand is it? go to that web site put in model number and download it there. also you might have the controls locked press and hold the heated dry button for three seconds to see if that unlocks the controlls. ... Dishwashers

I have a Whirlpool ADP6515. It's been working fine for about 2 years now but recently cycles are not completing properly, it can run for 30-40 minutes depending upon cycle. The start light is flashing a 4 times repeatedly, I think this happens when it moves from a wash to a pump cycle but not sure. We have to hold down the start button to force it to go to the end of the cycle and the the lights stop. If we do that we can then use the dishwasher the next time, but only after we force it to go to


While replacing the console board, the replacement should be of same version. The boards are using programmable IC. Hence matching the software version is a must. Only the manufacturer or his authorized provider can help regarding t ... Whirlpool Gold 24 in BuiltIn Dishwasher w Adaptive Wash Cycle 24 in Builtin Dishwasher

We have a Whirlpool GU980 Series Dishwasher. All the lights work. No matter what setting I use, it fills up, and then nothing happens. The "washing" light will be turned on, but nothing happens. I try to drain the machine, it will make a sound like it's going to begin a process, then it just stops. Do these things just "die" after some time? This machine is 7 years old.


Sounds like something is caught in the pump impeller. you will need to take the pump apart inside the tub. ... Whirlpool GU2400XTP Built-in Dishwasher

Stopped Working Hi, My Zanussi Aquapulse Dishwasher (DE6744S)has just stopped working. The red on/off switch still lights up when I try to start off a wash but nothing else happens. I know this is probably just a case of "call out a repair guy" but, even though I've had the machine a few years, I'm I bit miffed on the thought of coughing-up to have the thing repaired because I very rarely use it. Any suggestions? Many thanks


The problem is with the PCB, this is the board behind the buttons, you can buy this for £120 or you can get it fixed by QEA for about £45 link below. I am not an engineer but I replaced mine in 10 minutes.\015\012 ... Zanussi 24 in. DE6744S Free-standing Dishwasher

We have a turbothermic Miele dishwasher...It tells me it has a blocked drainage outlet...took it apart ,no blockage,cleaned the pump area of any debris but all clear...I rang mile support and they told me to try resetting it ....I t did work and we used the dishwasher..but it has the same problem again ..cant't remember how to reset it ..


I hope this information will be helpful. ... Miele Dishwashers

My dishes come out smelling like fishworms. It is horrible. I have to hand wash the dishes, cups, etc. Do you have any idea what is wrong? This happens more often than not. My dishwasher is about 4 years old. I use Cascade for the detergent.


\012Hi,Check your heating element.. \012A bad heating element causes many problems in dishwashers…Dishwasher Problems The ... Kenmore 24 in. 15079 Built-in Dishwasher

I have a Bosch Exclusiv dishwasher (Model SGS 8812 GB) which, from installation in January 2002, has consistently caused glassware to go cloudy. This happens after about 8/10 weeks from buying new glasses. I use Finish Rinse Aid and Salt and have an independent water softener installed. This is proving an expensive exercise, as I need to replace glassware every 10/12 weeks. Have you any suggestions, please? Thank you - Doreen Sheardown


You are sandblasting your glasses. The added salt with the salt from the softener is causing the cloudiness. If you are rinsing the dishes to be mostly clean first and using the suggested amount of detergent you are way over sudsing.#1 St ... Bosch 24 in. SHE43C05UC Stainless Steel Free-Standing Dishwasher

I have a dishlex dx302 dishwasher. Was working fine last use, but this time getting error message 1H, then all lights go out and nothing happens. Can you help?


... Electrolux Dishwashers

Started dishwasher and then it stopped, still has power going to it but control panel does not respond. When less than a year old, the same thing happened and the repair man said it was a thermal coupler.. is that the same as a thermal fuse and does that sound like what it may be again?


... KitchenAid KUDD03STSS Stainless Steel 23 in. Built-in Dishwasher

My dishwasher does not heat up the water. It seems to go through the cycles but uses cold, not even luke warm, water. What is wrong?


Well, if it's worked in the past, the most likely suspect is the water heating element -- this is used when "Water Heat" is selected on the controls.\015\012\015\012Otherwise, just hot water from your water heater is used -- I'm assuming ... Dishwashers

Cant get my zdt6053 dishwasher working. press the on/off switch and a green light will flash but will go off again and nothing happens. please help. Ray


My Zanussi ZDT 6503 INTERGRATED DISHWAHER IS STUCK ON A PROGRAME HOW DO I RESET IT ... Zanussi 23 in. ZDi6053SX Built-in Dishwasher

Bosch aquasensor I have just had a plumber install a second hand dishwasher as above, he left after he heard the water coming in, two mins after it stopped and nothing else happened bar the time still going, he has plumbed it into the cold water, is this correct or am I doing something wrong. Please help, thanks


No it should be plumbed into the hot side... it will not wash untill the water is hot enough ... ... Bosch 24 in. SHU43 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2678 seconds