Having problems with your Dishwashers ?

The door on our dishwasher no longer opens gradually, it slams to the ground. I think it is the hinge or spring mechanism but I don't know what I need to replace.


Answers :

You need to open the washer and then remove the side pannels (sometimes you must first unscrew fro back and the front bottom of the washer). Some have sprinngs that just unhooked and some have springs and nylon rope etc attached to the door spring that breaks). Only by opening will you be able to physically see the problem.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The door on our dishwasher no longer opens gradually, it slams to the ground. I think it is the hinge or spring mechanism but I don't know what I need to replace.


You need to open the washer and then remove the side pannels (sometimes you must first unscrew fro back and the front bottom of the washer). Some have sprinngs that just unhooked and some have springs and nylon rope etc attached to the door spring th ... Dishwashers

I need a heating element (i think) for my whirlpool quiet partner 1 dish washer, but i need the model number and I dont have it with me, do you know the part number for the heating element that I need or do I have to know the model of my dishwasher? it started with DU and was either DU1100 something or DU1050 something?


Your Whirlpool Quiet Partner 1 should have its model number inside along the left side. Mine is DU1010XTXT1. Your heater part is original Manufacture # W10518394. Can be purchased for about $38.00 at \012 ... Whirlpool Dishwashers

I have a Bosch dishwasher, model SHU9915UC/U11. The spring mechanism on the detergent door cracked, and I bought the part to replace it. I took the front cover off of the dishwasher to determine how to replace it. Two white plastic "things", maybe spacers, fell out. I need 2 things: a) how to gain access to the spring on the detergent door so that I can replace it, and b) how to put the door spacers back on. An exploded parts view would probably help a great deal. Michael J. Orr


Hello! This is Guru...Saailer...I have your information...Due to size limitations I'll need your e-mail address in order to send it to you...Send an e-mail to me and I'll send an exploded view diagram and parts list...Guru...saailer... ... Bosch SHU9915UC Dishwasher

Door mechanism door has 2 springs on each side, on the right the spring works on its own. But come to the left side and it has a long belt type piece of metal,the spring and a hook type piece that makes up how the door opens and closes.this left side has come apart and dont know how it goes together,therefore the door just drops very sharply to the dismay of my partner.plz reply to [email protected]


Wind metal strap around plastic bush and hook above hinge ... Candy 24 in. CD622 Free-standing Dishwasher

The cable to the door of my GE Potscrubber 900 dish washer (model GSD900L-02) broke. I purchase the replacement cable and now need to know how to reinstall this new cable. The replacement parts include two cables and two springs. Can you provide a "visual" of how this cable connects to the lower left corner of the door???


Question, my cable just broke yesterday. Where did you buy the part? ... Maytag Dishwasher

I need to replace the springs for the door of my Asea Skandia Cylinda 1200 dishwasher. Can anyone please tell me the specifications for the springs so I know what to ask for when purchasing new ones?


Hi, welcome to FixYa.\015\012\015\012I have complete specs. and part numbers on my home PC but I am away for a few more hours. \015\012\015\012If you wouldn`t mind waiting a while ( 3-4 hrs. ) I can certainly help you.\0 ... Dishwashers

I have a Chef Classic dishwasher ( model B8913WW) which is no longer heating the water, I assume I need to replace the element but nobody in my area knows where to get parts for this make or model, any ideas please??


If you know how to use a multimeter you can get to the heater connections and check the resistance of the element. it chould be about 26 ohme. Also the over heat protector thermostat should measure zero ohms. Make sure all wires connected to the heat ... Dishwashers

A round band came loose during a wash. It is a think black rubber-type band. The band is in tact it just need to be put back on, however i dont know where it came from. Dishwasher is a small version if that makes a difference.


That sounds like it came off of your small apliances (blender, food prosecer...) there is not any rubber washers on the inside of 99.9% of dishwashers becauss thay can melt in the heat. ... Dishwashers

The cover of the detergent dispenser does not latch properly and will flip open. The dishwasher is 6 years old and I think we need to replace the dispenser assembly but don't know how to take it off the door and put it back. The model number is GU1500XTKB0 Thank you for your help.


I've posted this before. The latch just needs a good cleaning. In the past, something placed in the washer kept the door from opening properly, which caused detergent to dry under the latch. This has happen several times until I figured it out. Don't ... Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher

The door handle is broken which enables the opening of the door. Therefor we can't open the door and need to replace the handle but dont know how . The handle is situated inside the door and there are no screws around it to to take it apart. It is an Indiset DG5000 model. There are screws at the edges of the door.


I had a similar problem with a similar model.\015\012Insert a fine screwdriver into the small space immediately abive the handle. Press the inside end down firmly and the lock should release.\015\012I ran mine for about 3 weeks, this wa ... Dishwashers

KITCHEN AID STAINLESS DISHWASHER MODEL #kuds02frssWe just replaced both springs in the door and the latch mechanism and the soap dispenser that still does not work. Our door will not stay shut. MY HUSBAND NEEDS HELP.. PLEASE HELP. HE IS VERY GOOD AT REPAIRS AND IS STUMPED!!


Hi.Your husband must check wiring harness from electronic control to door lock solenoid.The solenoid should also be tested reading Ohms with a multimeter.Here parts and diagrams: ... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

My magic chef dishwasher door springs broke. I need to know how to access the bottom of the dishwasher to replace the broken parts.


Open the back door and see whether the hooking points visible.Look from the front end also to get an idea! ... Dishwashers

My small boy fell on my open dishwasher door (Bosch) and now it's opening slightly in mid cycle and cutting off. It's not leaking or anything and works perfectly if I clamp it closed. When it's opened down then, it's very slightly slanted downwards. I have taken it 2 a repair shop twice and they've failed to sort it saying that its the sensor may need to be replaced but I think it's the hinges are strained. What should I do?


... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

I HAVE A DISHWASHER, KITCHENAID SUPERBA, I DON'T HAVE THE MODEL OR SERIAL NO#. THE ONLY NO#. I CAN FIND IS 8270140, THE DISHWASHER IS NOT RESPONDING TO ANY COMMANDS, THE RINSE LIGHT IS BLINKING AND THAT IT!!! I TRIED TO CANCEL BUT THE LIGHT COMES ON LIKE DASHES ON THE SGREEN THEN WHEN I HIT CANEL AGAIN IT GOES OUT, AND THE RINSE LIGHT JUST KEEPS BLINKING. HELP ME I THINK IT JUST NEEDS REST BUT I DONT KNOW HOW ? I CAN WITH THE HOUSE WHEN WE BOUGHT IT, HELP!!!! THANKS MARLA


I HAVE A DISHWASHER, KITCHENAID SUPERBA, I DON'T HAVE THE MODEL OR SERIAL NO#. THE ONLY NO#. I CAN FIND IS 8270140. The unit is not drying the dishes?\015\012 ... KitchenAid Dishwashers

Hi I have a maytag quiet series 300 with model # MDBTT60AWW and it will not start. All the lights lite up but it will not start. I recently just had to replace an element due to a recall so when he was hear fixing the element I asked him what he thinks could be the problem and he said it sounds like it possibly needs a new control panel. Does this sound right and if so do you know where I can get a control panel. Thanks for your help


... Dishwashers

Operations manual Need to know where i can get a manual for my dishwasher as when we bought the house, one wasnt provided. Dont know what the cycles are all i know is how to turn it on and do a full cycle..dont know what the other buttons are for and I LOVE buttons...but...need to know what they are for


Get the model number from the dishwasher. Most brands have websites where you can find owners manuals and print them off. ... Dishwashers

It won't start. It has to be in the handle. What needs to be replaced or repaired? I know its getting electricity. Is there are relay switch that might need replacing. I know it is in the handle area.


Their is a lever switch, that can fail, please rate/vote this response ... Maytag 24 in. MDB3700 Built-in Dishwasher

I have a G 2400 HH-R and I need to replace the pump oil, I know I need Karcher Pump Oil 6.288-050.0 but I don't know HOW to drain and replace the oil. Thanks, Bill


... Honda Karcher G2400HH-R Pressure Washer

Bosch dishwasher (SXH55MO6UC/46): The power comes on and runs normal, but no water is coming into the unit. I was told that it was a water inlet valve that needs to be replaced (part #263833). I need to know if this is what needs to be replaced and if so, is this something that I can do or do I need an expert repair service to do it? If it is something that I can do, I need instructions. I am handy, but this is something that I have not done before, Thank you, Craig Covey


Hi Craig,Yes it may be the fill valve...but first take off the pipe or hose and check the screen just inside the fill valve...some do not have it but most do...also check that water comes out of the hose or pipe at the valve....THEN ... Bosch Integra® 500 SHX55M05UC Built-in Dishwasher

I have a Kenmore Ultra Wash Dishwasher model 665.16379301. The spinner from the top of the dishwasher has come off. I have a replacement part but need to know what is required to replace it. Do I need to remove the feed tube assembly in order to replace it?


... Kenmore Dishwashers

Need a service/repair manual for a Bosch SGS0905AU/01. The machine is completely dead (no display) after a burnt smell came from it. On the pump motor is a broken/melted brown attachment with a broken ceramic(?) disc inside which looks like some type of capacitor. I really need to know what this is/was so I can replace it. Also, need to know whether there is another fuse somewhere in the machine as that has most likely blown as well. TIA


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012While I can provide a overall Bosch service manual if you post an email address, Based on your description I'd say the issue actually with the motor start relay and consiquently the control...as ... Bosch Dishwashers

We need to replace the little rubber latch that keeps the dispenser door closed on our Kitchenaid dishwasher. Do we need to replace the whole detergent dispencing unit or just the latch. And if we do have to replace the whole thing, do you know how it attaches and have advice for that repair? Type is Kitchenaid KUDS01IJ


Check here ... KitchenAid Dishwashers

I have a Maytag Quiet Series 300 Model # MDB8601AWS and serial # 10142983NA. I need to replace the bottom rack as many of the prongs have broken off and I need a bigger utensil holder. I know it has a safty recall and a local repairman is coming on Saturday. Where do I buy the replacement racks and holder?


... Maytag 24 in. PDC3600A Built-in Dishwasher

De dietrich dvf300ju2 needs door spring replacing - I have the spring but cant find it to replace.....


To replace the spring you need to pull the dishwasher out and look on the sides. You might also have to lay it on its back to see the springs.. ... De Dietrich 23 in. DVF110J Built-in Dishwasher

Whirlpool dishwasher model DU1055XTSQ2 will not run. Only half of lights on control panel working. Probably need to replace control panel. Do I need to replace the bi-metal fuse also. What does the bi-metal fuse do, how would I know if bi-metal is bad, what are symptoms.


... Whirlpool Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1272 seconds