Having problems with your Dishwashers ?

I have a kenmore dishwasher model 665, an the quick wash light keeps blinking. and the appliance will not work. i have tried pushing the cancel botton , the start botton. all it does is the quck botton stills blink, and no responces. can you tell me what is wrong. thank you E. P.


Answers :

Check your manual for the error message. May be certain additives are empty. In some machines salt, rinser etc
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a kenmore dishwasher model 665, an the quick wash light keeps blinking. and the appliance will not work. i have tried pushing the cancel botton , the start botton. all it does is the quck botton stills blink, and no responces. can you tell me what is wrong. thank you E. P.


Check your manual for the error message. May be certain additives are empty. In some machines salt, rinser etc ... Dishwashers

I have a whirlpool dishwasher thats a quiet partner 2. the cancel drain light keeps blinking and nothing else is happening. i try to unlock it and then the normal light starts blinking also and still nothing happens. i called a local repair shop and they said i need to change the control board so i did and its still does the same thing. can you give me an idea of where i need to start to fix my problem?


Can you here the pump running or check to make sure there is no water in the base... ... Dishwashers

"Quick Rinse" light blinks constantly, unable to select "start" unable to select "normal wash" sometimes can select "pots and pans" but still not able to start. Was working normally, when it stopped at end or pre-rinse to start the main washing cycle, the "quick rinse" light came on blinking, and no other button works except as described above. Thanks,


Hi,\015\012 \015\012Check out the console assembly. take off the inside cover and the plastic over the electronics, just remove the two screws holding down the circuit board, pull it to the side, then blow ... Dishwashers

I have a kenmore dishwasher mdl#665.16022401the clean light blinks all the time and i push the cancel button and then wash and the start and the start button light blinks 3 times and nothing happens.the clean light is still blinking.


... Dishwashers

Won start Was using the pressure washer 1st time this year and started on the second pull. Ran out of gas shut-off also noticed it needed oil. Believe, I put too much oil so, I drained some and added gas. At first, there was no resistant in the pull so waited an hour and tried again. This time the resistant was there on the pull but still would not start; no attempt even to turn over. It's been a couple of days...changed the spark plug although, hardware guy said nothing was wrong with it..still


... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

When I turned the dishwasher on the lights started blinking and making a noise. When I opened it back up, lights are still blinking and now it is beeping every 30 seconds. I have tried to reset the dishwasher and have even unplugged it. It is still blinking and beeping. Any suggestions?


... GE GLD4100MBB / GLD4100MCC / GLD4100MWW Built-in Dishwasher

Kitchaid kudd01dp top drawer start button blinks and won't start. we have turned power off and on and it still won't reset and start. How do we reset and start unit?


... KitchenAid Dishwashers

My dishwasher is 6 years old it started making clicking and knocking sounds about a week ago. The display is blinking crazy at about 37 minutes left in washing cylce it blinks 37, HO, and CL. It blinks other numbers also. The water still seems to be flowing in and out fine. It's heating up and draining when canceled. I'm running it on normal wash and high temp. cycle. It sounds like the sensing parts in the door are going off and on.


... Frigidaire 24 in. PLDS9999CC Stainless Steel Built-in Dishwasher

Electrolux Dishwasher Model EIDW6105GB1... no error codes...I select the cycle, everthing appears normal...start to hear water fill, but doesn't progress to point of opening soap container. When I open the door all lights are blinking. I've canceled and tried various cycles, but with same result... all lights are blinking. Even tried just a rinse only. all lights still blinking.... This unit is only 4 years old!


... Electrolux Dishwashers

Not working clean light blinks 7 times and stops and starts blinking 7 times i was told it was the heating element but i replaced it and it still blinks please help me someone thanks alot


Solution #3 is good, but you need to hit "High Temp Wash" and then "Heated Dry" back and forth 3x to reset the computer. ... Whirlpool 24 in. DU1055XTPS Stainless Steel Built-in Dishwasher

The clean light on our KitchenAid KUDS01IL dishwasher is blinking and washer won't start What is wrong?


... KitchenAid 24 in. KUDS01ILWH Built-in Dishwasher

My dishwasher keeps blinking the "clean" light and will not start. I have tried turning off the breaker to reset the machine but it still wont start even after pushing all the buttons.


... Kenmore 24 in. 16049 Built-in Dishwasher

Steam clean light blinking steady will not let me start machine. We tried to unplug machine still not stopping the blinking


... Maytag MDB8959AWS Builtin Dishwasher

The dishwasher won't start, its stuck, pots/pan button is blinking, & the timer has (2)_ _ bars blinking. I tried to reset/pushed the start/resume button nothing happened. I pushed the cancel/drain button still nothing happened. I close the door tight..nothing. I check the trays if there something stuck inside..nothing. I unplug/replug the power cord nothing? my wife was using it when this got stuck about 3 weeks ago.


Did you hold the start/resume button for at least 3 seconds if this works the dishwasher will start ok but if there is a fault it will fail again best you contact your nearest service agent good luck ... Whirlpool GU2400XTP Built-in Dishwasher

We have a whirlpool quiet partner iii. It was working fine and was opened mid cycle. Then it wouldnt drain. Then all the lights started blinking. At some point it drained the water out. We flipped the breaker and now just the normal cycle light is flashing. Flipped breaker again that didnt work. Tried the reset code hi temp wash and heated dry. Normal light still blinking. Help please?


See this causes and fix it. God bles you\012 \012 \012 \012 \012 Check Fault Codes\012 \012 \012 \012 \012 \012 \012 \012 \012 ... Dishwashers

I have DeWalt3750 psi pressure washer, its been long time since I used it, now that I wanted to use it, I can not start it. I already changed the oil and filled it up with new oil but still can not start, What is wrong with the washer? thank you


Here is the long answer with everything we learned while using a power washer twice a day for years::This assumes you did not turn power washer over or on its side to drain oil, or dirty oil will flow into carburetor requiring complete carburet ... Dewalt 3800 PSI Pressure Washer

Hello, My Ariston LSI 68 A dishwater have a problem: During the washing in reduct mode,(the 3rd program from left) after about 1 hr , he does'n end the washing and blinking the second light from left. (the normal washing program). In the dishwater still remain about 1 inch of hot water, the drying never start. If you can send me the blinks codes of my dishwater i appreciate very much. Thanks Leonardo Italy


The Ariston dishwasher alarms should be in the user manual. However, I cannot find the manual for your model. \015\012\015\012But I have found ... Dishwashers

My dishwasher's clean light will not stop blinking and it will not allow me to start a new cycle. I have canceled the cycle unplugged it and let it sit but the light is still blinking


Your\015\012dishwasher will do this as a safety in case the element is broken and\015\012feeding electrical current into the water. Sometimes just a false\015\012reading.Reset your console by pressing: ... Whirlpool 24 in. DU1055XTPS Stainless Steel Built-in Dishwasher

I have a Kitchenaid Dishwasher Model #KUDI01FLBL6. The heavy wash light is blinking on it. If I hit cancel, all the lights start blinking on the panel. I have replaced the control panel part #8564542 on it and it's still doing the same thing. The tech sheet is missing on it so I'm not sure if I should reset or how to do a diagnostic on it. Can you help with telling me what to do?


HI. The control board was actually not the issue here. The interface will be the lone culprit in this case. There is a stuck circuit or button that is causing this warning(blinking lights). The button is mounted on the interface and you will need to, ... KitchenAid 24 in. KUDI01FL - Multiple Color Built-in Dishwasher

Dishwasher has power but the delicate light blinks continuously. tried flipping breaker to reset but still blinks preventing the dishwasher to start. Any solution?


... Samsung DMR77LHS Tall Tub Dishwasher

I have a GE dishwasher model number GLD55OOLOOWW. It was starting a start cycle and i opened the door to put more dishes in and my finger must have hit a button on the door and now two lights flash off and on and it wont reset itself. It has been on for several hours and still blinking and beeping every so often and unplugging it does not help. Any suggestions how to solve this problem. Thank you.


Try pressing the cancel button ... Dishwashers

GE MODEL GSD5600GOOWW When start is pushed it goes directly into RINSE and blinks. Then after a minute it stopr asnd beeps continuely. What is wrong?


... Dishwashers

There seems to be an electrical fault in my dishwasher. It is a slimline candy dishwasher purchased only three years ago. Everytime I try to start it all the electricity goes in the downstairs of my house. I changed the fuse twice and it worked for a while only for the same thing to happen again. I also tried to turn off all other electical equipment downstairs to see if this made a difference, but it still didn't work. Would you have any idea what is wrong with it? Thanks. S. Byrne


Hello sue by rne.. \015\012If your fuse blows when you are running the dishwasher alone, I would agree that your dishwasher may have a problem however becuse you stated that it works sometimes..I am more apt to believe that when you run the di ... Dishwashers

Dishwasher stopped working. Lights blinking on panel. Turned off breaker and turned it back on after 10 secs and it still would not start.


... KitchenAid Dishwashers

Hi, I have a Miele G681 dish washer with an intake/drain light problem. I've read all posts about similar problems I could find both on this forum and others but I'm afraid I still can't figure my problem out. The intake/drain light starts blinking mid way into the dishwashing process. The dish washer fills up, rinses, drains, water is hot, everything seems to function just fine. Some time after the tablet drops from its door mounted container, and the time estimate reaches 46 minutes r


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1303 seconds