Having problems with your Dishwashers ?

Dirty dishes and flashing sprayarm light

\015 Miele premiere dishwasherHG01 model G891 sti Sprayarm is always lit when running.even ran it empty and it litdishes, glasses utensils are dirty. i cleaned trap and nothing is blocking spray arm.\015

Answers :

Hello. Check the rear of the drawer where the spray arm water supply is in the rear. Make sure all is aligned there. Sometimes, a support becomes unclipped or misaligned so that the full volume of water does not get to the spray arm.
\015\012
\015\012Also, do these things:
\015\0121. Run a full hot cycle with only two cups of white vinegar and 1/2 cup of baking soda added into the dishwasher.
\015\0122. Consider rinsing dishes of food debris before inserting in dishwasher. Although the dishwasher will still do the job it will not do as good a job I assure you. Joe
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dirty dishes and flashing sprayarm light


Hello. Check the rear of the drawer where the spray arm water supply is in the rear. Make sure all is aligned there. Sometimes, a support becomes unclipped or misaligned so that the full volume of water does not get to the spray arm.\015\012 ... Dishwashers

The green clean light keeps flashing even after unloading dishes and replace with dirty dishes. now i can't get the dish washer to start washing


This may help in your situation. The following link explains how you may be able to clear the blinking clean light problem:http://www.f ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Dirty dishes and now a flashing light


Dishes not coming out clean might be because u need to clean your dishwasher.. but with the electric shock aswell ... i think its done for .. go get a new one. ... Indesit 24 in. IDL500 Built-In Dishwasher

The red light flashes next to the salt light and when dishwasher finishes its cycle most of the dishes are still dirty


... Indesit 24 in. IDL700 Built-In Dishwasher

Fdl750 goes through cycle dishes still dirty two red and one green light flashing fast sounds as if water is entering and exiting ok


... Hotpoint-Ariston FDL570A 24 in Portable Dishwasher

Our Whirlpool KUDP01ILBS2 dishwasher isn't working like it used to. Dishes seem to be getting partially clean, they aren't getting dry at all and it seems they may be being rinsed/washed with dirty water. There is plenty of water in the machine when I interupt the cleaning cycle. I always run the hot water in the sink before I start the dishwasher so the first water into the dishwasher is as hot as possible. Also the sani-rinse light is flashing when the cycle "completes".


Heat that is retained in the dishes is largely responsible for drying\015\012in this dishwasher. Since plastics do not retain heat very well, they\015\012will not dry as well as glasses, ceramics or metal dishes. Rinse aid\015\012must be used so that ... Dishwashers

Dishlex Global 310 model. My dishwasher has water sitting on the bottom of it and it wont drain. I noticed it after I did a cycle of dirty dishes and the 'fast' light was flashing when I went to open it. Which shouldnt have been because it was on a normal wash. The water has been sitting at the bottom for 2 days now and still wont drain! I've taken out all the parts on the bottom which come out and cleaned them. Still no change however.


Just ran another cycle and it was fine ... Dishwashers

I just bought a MDBTT53AWB1 dishwasher two weeks ago. The "clean" light is flashing eventhough I emptied the dishwasher and placed dirty dishes in. It will not allow me to run a new cycle. Can you help


... Maytag Dishwashers

My hotpoint dishwasher slimline sw60 has a flashing deleciate light after the cycle, we have worked out that it is not heating the water now but running fine and drying the dirty dishes! Can it be fixed easily at a deccent price or is it better to get a new one?


... Dishwashers

I have a Kenmore Elite dishwasher (model 665.1315), and the dishwasher will run through the wash cycle as expected, but when it gets to the heated dry cycle , it doesn't appear to dry. It will then flash a fault code 81 (8 short flashes of the 'clean' light, pause, and then 1 more short flash of the 'clean' light, longer pause, and repeat the code). The dishes seem to be somewhat dry, but there is certainly water on the dishes and on the tub (there is never any water standing in the tub, and t


Hi,Check your heating element.. \012A bad heating element causes many problems in dishwashers...Dishwasher Problems The ... Kenmore 24 in. 15932 Built-in Dishwasher

My dishwasher will not start just these three lights are flashing at the same time. What should I do? The three lights that are flashing are smart wash , normal wash and cancel drain. The dish washer


Try turning breaker panel for that off, and back on. might just need to be reset. If that doesn't work, call the repair man ... Dishwashers

I have a Triton dishwasher. Last cycle, it completed washing then started drying and started beeping and the drying light is flashing. When I finally opened the latch, the beeping stopped, but the drying light is still flashing. The dishes were clean and warm - they air dried the rest of the way. I have not been able to get the drying light to go off. I have turned the breaker off over night, and flipped back on. The dishwasher goes back to flashing washing, and then clicks to drying and th


Hi,\015\012Make sure the salt level is ok - add 1Kg of salt if you have not done it in a while, and check rinse-aid level if apliccable.\015\012\015\012If this does nothing, then remove the lower kick panel for access to a data shee ... GE Dishwashers

I rinsed my dishes first, then i put in a tablet to wash the dishes ad never thought any more about it untill the following morning i went to empty the dishes and discovered that the dishes had not been washed and the tablet was still in its compartment, i also noticed that there is dirty water in the bottom of the dishwasher, on the panal there are two lights CHECK WATER, AND THE ACTIVE LIGHT is on, i would be very grateful if you tell me what is the problen. thank you ANNETTE BECK


Sounds like the drain is clogged, so the dirty water is not draining and the dishwasher won't cycle because if it did it would overflow (causing a mess). So I would suggest trying to remove the obstruction (could be food or a utensil, etc.... at the ... Dishwashers

Ran dishwasher overnight came downstairs this morning and instead of a steady green light indicating the dishes are clean, i see a flashing green light indicating dishes are not sanitized. how do you get rid of green light.


Hi.If the dishwasher is not sanitizin that means that the machine does not detect that the water temperature required for sanitizing (120) is reached.I do not have make an model info. Most appliances will reset simply by tripp ... Dishwashers

I have model GU3600XTSY2. Sometimes the pots and pans light flashes for no reason. Sometimes I can push that button and it stops. However, the cycle I select to wash the dishes is constantly interupted by the pots and pans (P&P) light flashing. If I push the P&P button, the wash cycle usually starts where it left off. Sometimes it will go back to the beginning of the cycle and begin all over again and get caught in a loop; start washer, P&P flashes, push P&P, begins cycle from beginning, P&


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Asko d3100 I have an asko d3100 dishwasher. Its just out of warranty and now the cup saucer light flashes and the water pump is continuing to pump even though there is no water. The dish washer wont start. What is the problem. I think the flashing cup saucer light is reporting a fault. If I know what the fault is for example faulty relay or pump then I can replace it. Can you help me with this one? Is there a service manual I prbably can get my hands on.


Remove the lower panel at the back of the machine. If there is water on the bottom pan, wipe it up with a towel or so, and the machine schould be like new again ;-)\015\012\015\012Good luck ... Dishwashers

Trouble shooting I have a green flashing light and the dish washer will not work while this light is flashing. What is wrong?


... Kenmore 24" Built-In Dishwasher with UltraWash HE Wash System

My kitchenaid dishwasher model # kuds02frss2 stopped working after I ran a cycle of dishes last night. When I looked at it this morning 3 lights were flashing: normal, china and cancel. When I turn off the breaker and turn it back on the same lights resume flashing. Any ideas on what this could be?


... Dishwashers

Kitchenaid kudc03fvss0 dishwasher stopped mid cycle without drying dishes last week and then stopped altogether with lights flashing and full basin. I disassembled filter/pump cover in bottom and cleared several plastic pieces and cleaned chopping blade and screen. After unplugging/plugging and pressing cancel button the pump runs for about 10 seconds and stops with normal and heavy duty lights flashing. What should I check next?


... Dishwashers

My Kenmore model 665.16022401 has the problem w/ the clean light flashing. I tried the bottom combo of hi temp wash, heated dry, high temp wash, heated dry and it re-set my dishwasher but then after I tried to run a new load it doesn't seem like it finishes all the way through because there is still soap left in the soap dispenser and the dishes arn't all clean, plus the green clean light begins flashing again. Don't know what to do.


... Kenmore 24 in. 16022 Built-in Dishwasher

I have a Bosch dishwasher sg145e16gb It does not wash the dishes clean and all 3 lights are flashing. I have put in some salt and rinse aid but lights still flashing.


... Bosch 24 in. SHU43 Built-in Dishwasher

We have ASKO 1805 dish washer. As soon as turn on the power all lights are start flashing and there is no response whatever button is pushed. All the lights simply keep flashing. There is no water being pumped into the machine.


Child lock may be activated ... Asko Dishwashers

I have the Whirlpool Quiet Partner 1 the wash cycle starts and about 20 Min.'s into it the clean light starts flashing or the the start light, one or the other each time and it wont dry the dish's anymore we have already replaced the panel once and it has always popped when it is filling with water or changing cycles. HELP!!!! I hate washing dish's and I am beginning to hate all Whirlpool Appliances.


If the clean light blinks 7 times thats you heating circuit. Test the heater with an ohm meeting to see if it has open. If so order the heater kit and it comes with the control board. ... Whirlpool GU2400XTP Built-in Dishwasher

I have a Frigidaire Gallery dishwasher model number FDB989GFC2. All of the indicator lights on the right side are flashing (Controls lock, add-a-dish, washing, etc.). when buttons are pushed I get no response. Have tried turning off at circuit breaker for 1 hour, when powered back all lights still flashing and still no response from pushing buttons. Any ideas?


You need to rpelace the electronic control board ... Frigidaire FDB989GF Dishwasher

Lights flashing at end of cycle, dishes not clean


I switched it off at the wall and left it for a minute and set the dial to Stop and then set it again from the beginning and so far it has been fine. Thanks, DCD ... Miele Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1222 seconds