Having problems with your Dishwashers ?

Meiko FV40.2 errors 203 and 304 popping up

\015 When trying to turn the dishwasher on it usually can't get past the err 304. When it has made it past this point it will read err 203. I'm trying to find out the different reasons for these errors and a service manual to help walk me through the repair. I've not done much work on dishwashers before but have repaired many other machines and problems in the past with little difficulty. Is there anyone who can point me in the right direction?\015

Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Meiko FV40.2 errors 203 and 304 popping up


... Dishwashers

We have a Meiko FV 40.2 and are getting Error 111, code 1 We can no longer find our manual. Any assistance you can provide would be appreciated. Thank you.


... Meiko FV 40.2 Dishwasher

Our Meiko keeps popping up with error's 203 and 304


What is the problem actually? ... Meiko FV 40.2 Dishwasher

Please help We turn the machine on and error #304 pops up. The units almost up toTemperature but doesn't quite make it. A day or two before this washappening error #203 had popped up a couple times. The operationsmanual states the reasons for some other errors but not these.


Hi, you dont state the make and model of your machine. ... Dishwashers

On my bosch shu66 diswasher the error code indicates a number 1, aqua sensor I think. There is a screw missing in the soap dispensor and it's been letting water into the door interior. could this be repaired by replacement of the screw and drying out the interior insulation and wiring The solution I tried didn't clear the error code on the panel. Is there a reset or do I need to replace the aqua sensor or ? The machine still won't start and displays a #1 on display. There is no water in the whi


... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

OE Error I'm getting an OE error which is a drainage trouble error. I checked the hose and the drain, and everything is clear. My diswhwasher runs 98% of its full cycle and usually with 2 minutes to go I get this error. I have 2 opinins as to why this is happeneing. 1. Maybe the clog is in my trash compactor, however that seems to be working fine and my sink is funning with no slow down. 2. My 2nd theory is I have to reset the progam within the dishwasher. Like how sometimes I


Had the same problem and had the pump replaced ... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

Hi I have a LG LD-2052 dishwasher. It gives me an E 0 error - the water does not pump out when I open the machine after a few minutes when started to wash and message of E 0 appears? Have cleaned an


... LG Dishwashers

HI, We have a Meiko DV 80.2, with a recurring error code of 204. I changed the booster level switch, and it worked for a while, but is now showing the same error 204. Any ideas Please ?


... Meiko Dishwashers

I have a Bosch SGE63E05UC dishwasher that keeps intermittently showing an "E:25" error code. Occasionally it will get all the way through a cycle without going into error, but more often than not it will error and stop. So far the main control module in the front panel and drain pump have been replaced and the problem persists. All hoses have been checked and are clean (unit is only 1 year old) and drains well, when it does drain. Any suggestions?


... Bosch SGE63E05UC 24 in Builtin Dishwasher

I have had an E24 error message on my Siemens freestanding dishwasher. As well as the Error message the the little tap sign lights up too. Up until now the problem has occurred around 1 in 3 attempts and mainly at night but not in the day. When it does work the washer works perfectly and washes well. Today it will not work at all. The error always comes up 2 minutes into any cycle. I've tried turning the water feed off and on and in the past this has worked. It sounds like no water is gettin


Hi Steve\015\012\015\012E24 error normally indicates failure to drain, the first\015\012thing to check is that the water is actually being supplied to the appliance\015\012and is turned on. If it is then check the water inlet valve, if th ... Siemens 24 in. SE25T250 Free-Standing Dishwasher

Miele dishwasher optima G 2420. during instalation and test for water hardness display shows 'P' then '1' then '0'. is this a water hardness of '1' or of '10'


... Miele Optima G2470SCSF Dishwasher

Error 203 meiko disheasher - Meiko FV 40.2 Dishwasher


... Meiko FV 40.2 Dishwasher

KitchenAid Dishwasher KUDP01FL: Called repairman to replace balance link kit. Then door extremely stiff to open & heard loud pop when one of the ropes came off the roller. Repairman came back & put rope back on & replaced door seal, then the door won't close & he claims need a new door latch. When he left, door again extremely stiff to open & heard same loud pop when one of the ropes came off the roller. Now he says he can't fix it and to call someone else. I now have three problems: (1) The doo


May have bent door hinges,, need to check all alignment of door, hinges and latches... ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Error 03 -"Wash pump not operating" and sometimes Error 12 "drain valve is running when it should be off". About one third of time runs normally. Other times only E03 or E 12 after E03 and restart attempts(pwr off/on). Pwr off 1 min before restart attemps. Last 45 uses eventually does run to finish. Local tech unable to replicate problem in one $100 service call.


... Electrolux Dishwashers

Meiko DV 80.2 Dishwasher error 702 - Meiko DV 80.2 Dishwasher


... Meiko DV 80.2 Dishwasher

What is Meiko FV 40.2 error code 304 - Meiko FV 40.2 Dishwasher


... Meiko FV 40.2 Dishwasher

Quan KPS1 error on MEIKO K200 VAP Dishwasher - Meiko Dishwashers


... Meiko Dishwashers

Meiko dv80.2 error 201 - Meiko DV 80.2 Dishwasher


Error code 201 Indicates the incorrect water level...in that the level was not achieved during filling...check the following.Correct water level was not reached during initial filling.Check that the water hose is correctly att ... Meiko DV 80.2 Dishwasher

The note by FixAllPhil entitled "Poor cleaning or noisy pump on Whirlpool or Kenmore dishwasher" has a significant error. The first step should be to "Remove the lower wash arm (1) by turning the nut CLOCKWISE (right)". I damaged the threads on my dishwasher nut by trying to turn it counterclockwise. Once that error is corrected, please remove this post.


Thank you! ... Whirlpool Dishwashers

My bosch dw gives a error code of 1 this is an over or under water filling fault not a heating error which is posted on this site which one is correct


Hello, welcome to Fixya. Actually an error code "1" refers ONLY to a heating error. I'm not sure what you've based your info on, but "1" being displayed has nothibg to do with a water fill/level issue what-so-ever with any Bosch dishwashers. Here's h ... Bosch 24 in. SHU43 Built-in Dishwasher

Error 901 en meiko FV250.2 - Meiko DV 80.2 Dishwasher


... Meiko DV 80.2 Dishwasher

Er 1 my dish washer is displaying an error 1. am I able to fix it myself?


... EuroTech 24 in. EDW132C Built-in Dishwasher

Hi I have a Whirlpool ADP60001X, 4 years old. Problem - Error 4 showed so I fixed that then started another cycle and it shows up error 1 now - what does that mean & how to fix - help would be appreciated thank you


... Whirlpool 24 in. ADP6940 Dishwasher

Meiko dv 80.2 error code 203 - Meiko DV 80.2 Dishwasher


... Meiko DV 80.2 Dishwasher

Meiko dv200.2 error codes - Meiko FV 40.2 Dishwasher


... Meiko FV 40.2 Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0691 seconds