Having problems with your Dishwashers ?

I have a siemens GV630 control pannel inside my Bosch Aquasensor Dishwasher Model number SGS5302AU/07 it has a blown electronic componet on the main electronic control pannel. There are four of these identical semi conductor components on this pannel one of them has exploded. The part number off the component is Z9MY748 this part needs to be replaced where can I purchase this part (I live in Acukland New Zealand) Yours Sincerely, Casper Vissers.


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a siemens GV630 control pannel inside my Bosch Aquasensor Dishwasher Model number SGS5302AU/07 it has a blown electronic componet on the main electronic control pannel. There are four of these identical semi conductor components on this pannel one of them has exploded. The part number off the component is Z9MY748 this part needs to be replaced where can I purchase this part (I live in Acukland New Zealand) Yours Sincerely, Casper Vissers.


... Dishwashers

I need to replace the heating element and electronic control board on my Kitchenaid KUDS01DL Dishwasher. I have the parts. I have been able to find directions on how to replace the heating element, but am not finding anything on the electronic control board. I don't even know where this part goes. I am guessing somewhere in the door, but can't find any instructions. Help...


... KitchenAid 24 in. KUDS01DLSS Built-in Dishwasher

My KitchenAid KUDS01FLSS0 won't turn on when the "Start" button is pushed. Several months ago it began requiring multiple pushes to get it to start. All the cycle lights on the control panel work when pushed - except the "Start" button. Online & repair parts person suggested I replace the: - Tail Cable Ribbon; did not fix problem, then - - Electronic Control Board (interface) which also did not fix it. Should I replace the Electronic Control Board that is actually the part with the buttons


... KitchenAid Dishwashers

Judging from the information on this forum and others, we think we need to replace the control module on our Bosch dishwasher (she45m05uc/50). The general consensus seems to be that the module has an underrated relay and will burn out again. Has the board been redesigned? Is there a newer board that would work in our model? Bosch says that only part number 676962 will work. Thanks for your help, Deb


... Bosch Evolution 500 SHE45M05UC Stainless Steel Dishwasher

Bosch model SHU9915UC dish whasher water feed will not turn off. Need to know if control can be repaired or replaced? Part number, where can I order one, can I change it myself, I am handy.


Hello,Welcome to FixYa. ... Bosch SHU9915UC Dishwasher

The electronic module in both dishwashers have been infiltrated by German Cockroaches and subsequently dont work. I need service replacement modules (2 Off) and I can fit them myself. Part Number 528397NAP. Where can I source these. I live in Newcastle NSW.


... Dishwashers

WHAT ARE THE THERMAL FUSE SPECIFICATIONS FOR KENMORE ELITE MODEL 66513122K701SERIAL NUMBER FY1211868 AND WHAT IS THE PART NUMBER FOR A THERMAL FUSE KIT? WE HAVE HAD TWO FUSES BLOW AND THERE DAMAGE TO THE WIRING ON THE LEFT HAND SIDE OF THE CONTROL PANEL THAT CONNECTS O THE SWITCH. THEIR IS DISCOLORATION ON THE PARTS AND WIRING. WE HAVE SEEN EXPERTS STATE THAT IN ORDER TO CORRECT OUR ISSUE WITH THE FUSE BURNING OUT WE NEED A THERMAL FUSE KIT AND WE NEED THE SWITCH AND THE WIRING THAT CONNECTS TO


Http://appliancejunk.com/ge/dishwasher/31-9137.pdf\015\012\015\012A ... Dishwashers

I have a kudso1flss6 dishwasher with the clean light flashing 7 times. Can I replace just the control unit or do I have to replace the heating element also? I also need to know how to replace the part or parts. Help!


Depress cancel button. Turn off power WHILE STILLL HOLDING DOWN cancel button, turn power back on. Viola! ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

We had a repairman come in because the dishwasher wasn't working. He said to replace part numbers WD21X10169 interlock switch and part # WD21X10215 module control. I have now replaced both parts and the dishwaher is making a high pitch sound and not working.


It could be something stuck in the pump/sump area.. sorry. ... Dishwashers

After a power surge the dishwasher does not work at all. It just beeps constantly. There are no lights on the touch pad at all. The only thing that stops it from beeping is to remove the 2 pin black and white wires. I replaced the control module. Nothing changes. Do I need to replace the touch pad? What about the 3 digit clock? These parts together cost 145 dollars. I do not want to buy these parts and put them in to find out that did not fix the issue. I also unplugged the


... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

Need new detergent cup dispenser for Model KUDI220T4. The detergent cup dispenser (Part number AP3042989) has been discontinued. Need to find the replacement part and directions on how to remove existing detergent cup dispenser and install new detergent cup dispenser.


... Kitchen and Much More Dishwashers

I have a Whirlpool Model DU943PWKQ0 dishwasher. Several of the controls on the front panel no longer work, ie normal wash, cnacel and drain, etc. Others like heavy duty wash work perfectly. It appears the most used are what is not functioning. My question is should I replace the Microcomputer assembly part number 8530929 or the Console (with overlay) part number 8274732. Can you help as I cannot really afford both!


... Dishwashers

The start switch (right side) not power switch (left side) broke....(below the overlay). I need to replace the switch and overlay. What part(s) do I need to fix the switch. I now have overlay part number. This is for "start" switch... Thanks


Hello again,\015\012\015\012I'm glad I was able to help you earlier with the overlay, unfortunately I'm not sure I can go 2 for 2 because the start switch issue is going to be a little more involved.\015\012\015\0 ... Asko 24 in. 1805 Built-in Dishwasher

Whirlpool GU1500 XTLS Dishwasher, need control panel part number


Just go to this site and you will find the part you are looking for.\015\012 http://tiny.cc/z5Sy6 ... Dishwashers

I have a kitchen aid dishwasher model number KUD101TJBLO. I have had the thermal fuse replaced numerous times. It may run two weeks ir it may rub two cycles then the fuse blows. My serviceman has given up on finding a solution.He has replaced the control board and the door switch. However it continues blowing the fuse. I read on the internet that you need to replace the entire wiring kit that comes with the fuse but my repairman says this will not fix the problem and refused to replace the kit.


Hi\015\012\015\012\015\012Thanks for using FixYa. Please check for the short on the wires near the heating element. Also check the resistance of the heating element, it should not be more than 1.6 K ohms. Also ma ... KitchenAid Dishwashers

Need model number or manual for dishlex hydrapulse ecosave dishwasher as need to replace electronics


There are several versions of the Dishlex Hydrapulse Ecosave Dishwasher The 300, the 550 and the 1000 models all have Dishlex Hydrapulse Ecosave in their sales data. To get you the correct manual OR parts I need your model number and GEOGRAPHIC loca ... Whirlpool 24" Built-In Dishwasher - Black-on-Black

The lower spray arm came off during a dishwasher cycle and melted. The dishwasher is okay but I need a replacement spray arm for a Sears Galaxy dishwasher model number 587.15139400 I have searched google for replacement parts for this model and have not found a place where I can get a lower spray arm. Any help would be appreciated.


Sears parts dept ... Sears 24 in. 14181 Built-in Dishwasher

I need the upper and lower rack rollers replaced but do not know the part numbers. I am looking for a parts diagram on the internet but have been unable to find one. GE Nautilus, Model GSD2200G00CC


This link, provided by www.repairclinic.com shows what you need.\015\012\015\012 ... GE Nautilus 24" Built-in Dishwasher

I have a KITCHEN AID DISHWASHER Model Number: KUDV24SEBL2 and need to replace the Shield, Sound Tub Part No. 3378573. No one has it in stock. Any suggestions on where to find one or build my own replacement?


Hi,You could buy it from :-http://www.appliancepartsworldwide.com/Store_SearchResults.aspx?S=385148&ST=PBMIt is in stock as per them.Let me know,if needed further assistance.Hope i helped yo ... KitchenAid 34 in. KUDV24SE Built-in Dishwasher

Just need a part number, I have a CA-2003-HDHB pressure washer and I need the part number for the valve kit. also if you could direct me to where I might find a parts breakdown online for my machine, in case I need more part numbers. Thank you. Joe G.


... Mi T M Pressure Washers

Repairman out twice...quote too high -replaced plug in parts Sears guy said were needed in control board area. Still-blinking lights /no water filling/no progress thru sequence. Sequence shown on "


REPLACE WATER INLET SOLENOID ... Kenmore 24 in. 16309 Built-in Dishwasher

Kenmore dishwasher 13749 needs a new electronic control panel


I have a similar problem. The control panel buttons are peeling off. It seems like a manufacturing defect rather htan steam damage. Did you replace the panel?Thank you. Michele. ... Kenmore 13742 / 13744 / 13749 Built-in Dishwasher

Need to replace electronic control module how do we remove front panel of our single dish drawer


... Fisher and Paykel 23 in. DD-603 Built-in Dishwasher

Is shy66c05uc/14 the same model number as shy66c0fuc ? If so I need a the filter that inserts under the big mesh plate in the bottom of the dishwashwasher- where is the best place to replace such a part? Mine seems to be literally coming apart at the seams!


... Bosch 24 in. SHY66C05 Stainless Steel Built-in Dishwasher

My power button cover broke on the dishwasher and I figured out the part number I needed, but when I put it back together I got the wires crossed on the board and door switch. Now the control lights up , but the dishwasher will not run a cycle. THe question is does the plug on the door switch have to be a certain way, because there are three wires and you can connect the plug both ways. I did turn the plug, but it still does not run. Did I break the switch? Bosch SHU9956uc/14


The wires do have to be a certain way on the door. Otherwise a door open can tell the board that's it shut and vice versa. The easiest way to do it, is test the switch with an ohmmeter, place the meter on the switch, push button in and see if the rea ... Bosch SHU9956 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0783 seconds