Having problems with your Dishwashers ?

Our Ariston LD87 dishwasher is displaying the error code AL04,also the clip on the door is broken and no longer shuts properly. what can we do to solve these two issues? Thanks


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Our Ariston LD87 dishwasher is displaying the error code AL04,also the clip on the door is broken and no longer shuts properly. what can we do to solve these two issues? Thanks


... Dishwashers

My Brandt VF300 dishwasher is not draining properly. If I empty the residual water (by hand) I can still use it but the water still remains in the bottom at the end of each cycle. How can I fix this? It's driving me nuts! Also the door is not functioning properly something has broken that supports the weight of the door. It can only be shut completely or open completely! Is there a part that can be bought to fix this?


... Dishwashers

I have two problems with my GUI1500 dishwasher. The 1st is that when water starts entering the dishwasher I hear a loud hammering/vibrating sound. It's strange, but the sound will stop if I turn on a faucet in the house. The other problem I have is that the soap dispensor will no longer stay closed. The Plastic tab that holds it shut has basically disintegrated. Will this cause the dishes to not come clean? Can this part be replaced? I don't see any visable screws holding it onto the door.


Hi - welcome to FixYa,\015\012\015\012The first problem isn't a fault with the washer, it's a plumbing problem called "water hammer", which is a resonating vibration through your pipes. It's usually caused by a toilet flush valve, but can ... Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher

Hello all, We have an Ikea Whirlpool DWF 416 that is a couple of years old and has never caused any problems. From today the door has stopped shutting properly. The electronics and internal mechanisms seem to be working fine, since when you turn it on the cycle starts - but only if you hold the door shut. Has maybe a catch gone? Any ideas for fixing a door-shutting problem like this? Thanks in advance! Dave


The catch is no longer working. Contact IKEA for the replacement part. I'm sure it's available through EBAY or something, but probably not guaranteed or as reliable. ... Dishwashers

Door not shutting properly


... Dishwashers

I have a Bosch SHU8805UC/14 dishwasher. I took the front door panel off to install it better but ended up with two extra pieces that look like either part 935400 Door Guard, or 935526 Support. I cannot seem to find any place on the inside of the door where these pieces would fit. The dishwasher works fine but seems like it got noisier after I put it back together without these two parts. Can you help me locate the proper place for these 2 plastic parts?


Hello, \015\012\015\012Welcome to FixYa.\015\012\015\012I believe the parts you are referring to are likely the blocks in each corner of the outer door panel. These have been a sticking point for many I tech over ... Bosch Dishwashers

My GE dishwasher's door is stuck shut ~ I'm assuming a broken latch. I was told to fix the latch, the dishwasher has to be taken out from under the counter top (in order to get the door open). My problem is: with the dishwasher door stuck shut, it's impossible to unscrew the dishwasher from the countertop... Any helpful hints? Pleeeeeeeease (all of my silverware is stuck INSIDE the locked dishwasher - LOL!)


Well I'll try to help you get this opened. I don't know how much space you have at the top side edge of the dishwasher. You need a long stiff rod like a metal clothes hanger straightened so it can reach from the side to a little past the dishwasher m ... GE Profile PDW9880NSS Stainless Steel Dishwasher

Door lach/handle plastic pins have broken off and two pronge ears attached to door that hold handle in place have also broken off. This is a Maytag Model MDB5600AWW dishwasher.


Handle was redesigned with a metal rod through the attachment points to prevent breaking. the handle and latch comes as a complete assembly (you don't have to put it together). ... Maytag Dishwashers

I purchased a new dishwasher on 2/22/07 at the Home Depot in Parksburg,Pa. I first had to have it repaired on 4/28/08 for wires stuck to inner door. They repaired two broken wires and added insulation so wires do not stick to the door. The second repair was a little more than two months later. On 7/18/08 they had to install a new motor because the motor locked up. Both times I waited several weeks due to not having money and appliance center being busy. I used J.B Zimmerman in Blue Ball,P


Hel1Dav2,\015\012\015\012I understand your frustration with having to deal with major repairs to a new applaince. However, I don't belive this is the correct forum that you need to use. I have found a helpful link that you may try in th ... Dishwashers

The Simpson Silencio 850 door does not shut properly and the dishwasher stops operating,but once you push hard on the door,the dishwasher starts again. There are no leaks ,but the door must have a sensor registering the correct pre-load force against the door seal , which in turn,allows the machine to operate. My machine does not work until you push hard against the closed door. What is the problem please?


... Dishwashers

I have a 13-year-old Maytag DWU9906BAE. It has worked well but the door now opens too far - about 20 degrees lower than horizontal. I've taken the door apart and the reason is that the upright part of the two L-shaped hinge plates no longer catch on the back of the door jamb; for some reason they are now angled too far out and miss the catch plate on the back of the jamb completely. I'm no expert but they don't look warped, nor does the frame that they attach to. They're made of stamped


... Maytag Dishwashers

How do I replace the spring in the soap door? Spring appears to be broken because it is sticking out from the door. Door will not stay shut.


It depends on the breakage. Contact service center and get the part replaced. ... Bosch 24 in. SHU43 Built-in Dishwasher

Our model is a 920 Serial no UUM492989. The door will not clik shut. If I hold it closed it will work. It appears that the latch in the door has a wee bit broken off it which prevents the door from shuting . Can this be fixed?


Yes u can buy a latch. check for door seal for obstruction also ... Dishwashers

The detergent dispenser [Main Wash] door doesn't stay closed. It seems like there is something wrong with the latch, but we can't what. We've cleaned it, but don't know what else to try. There don't seem to be pieces missing or broken. But no matter what, when we put in the detergent [we use the cubes] the door always just pops open and the detergent ends up falling to the bottom on the dishwasher. The dishes are still getting relatively clean, but we want to solve the problem with the door


... Frigidaire FDB1200RG 24 in. Built-in Dishwasher

Kenwood dishwasher kdw8st2a replaced door lock mechanism, door closing properly and program selection available but none of the program's will start. When I shut the door I just have an intermittent beeb and no error message. Any solutions?? Been trying to see if I need to reset anything but can't find a solution. Thanks jo


... Dishwashers

Mtsui mf145 faulty door catch. the door is not shutting and i think catch is broken


... Dishwashers

I have a GE dishwasher model number GLD55OOLOOWW. It was starting a start cycle and i opened the door to put more dishes in and my finger must have hit a button on the door and now two lights flash off and on and it wont reset itself. It has been on for several hours and still blinking and beeping every so often and unplugging it does not help. Any suggestions how to solve this problem. Thank you.


Try pressing the cancel button ... Dishwashers

Water coming out front of dw at start of wash cycle. I leveled the unit. no luck. if you open the door during fill cycle the water does not shut off. also, may be a problem with float shut off working properly. what should I try next? Kenmore Elite 16579


Hi \015\012Check float to insure that it is free to move, it sounds like the dishwasher is over filling. That is assumed that you have not changed the type or amount of detergent being used.Also there is a probability tha ... Kenmore Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103

My Frigidaire fghd2433kf1 starting flashing PF occasionally. I would open and close the door and it would go away. It became more frequent until two days ago when the dishwasher stopped mid cycle and flashed PF. When I opened and closed the door, everything went dead and the dishwasher no longer works. It acts like it has no power coming into it. I checked the breakers and the wires connecting the power into the dishwasher. No luck. I replaced the control panel, but not the control board. It did


... Frigidaire FGHD2433KF Builtin Dishwasher

The door hinge on my hotpoint dishwasher BF1620 has come unhooked and has jammed so i cant fully shut the door now. How would I find out which part is broken and is it fairly easy to fix a hinge yourself. Thanks


... Dishwashers

Should the detergent dispenser door be open once the cycle is done? I always saw it as open so I knew the detergent had been emptied, but now when I open the dishwasher after completion of all cycles the det. door is shut so I assume something isn't working properly


Hello, Yes the door should be open at end of wash,either the dispenser is faulty or the p.c.b. If you dont want to go to the exspense of new dispenser etc.Try putting tablet ( I presume you are using tablets ) in the cutlery basket.If you are using p ... Bosch 24 in. SHU43 Built-in Dishwasher

Moffat dishwasher The door has come repositioned on the left side and it will not shut properly and when the door is all the wway open, the bottom rack will not pull out smoothly without lifting it up slightly. Haven't tried it since the problem arose as I was afraid that it would leek. also I didn't want to force it back into position for fear that I ould break it. I bought it Aug., 2006. It is a Moffat Model #MHDD210LOOWW.


... Dishwashers

Fisher Paykel Nautilus DW920- the latch on the inside door at the top is broken & I need to tape the door shut to ensure the machine does its cleaning cycles. Is there a spare part for this & if so what is it called.


521782 \015\012HANDLE BRANDED 920 BK \015\012SATIN ... Fisher Dishwashers

Maytag 300 Quiet series had a broken door latch. I replaced the latch, but now it won't automatically shut off when I open the door. Whaz up? thanks!


... Maytag 24 in. MDB5651A Built-in Dishwasher

I have a two year old Neff Dishwahster(S5453X1GB).The door is stiff to open after it is opened approx 30 degress and it appears to have dropped slightly.It appears to be the hinges which have either moved or broken although the former appears to be the case as the door fully extends after a bit of a struggle. Any advice greatly appreciated


... Neff Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0778 seconds