Having problems with your Dishwashers ?
The door on my indesit DI450 will not close. I can't see what is wrong with it.
Repair Help & Product Troubleshooting for Dishwashers
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
The door on my indesit DI450 will not close. I can't see what is wrong with it.
Indesit di450 dishwasher, when i put the cycle on and close door the wash starts then there is a noise coming from the machine a rattling, vibrating sound, i have checked the dishes are loaded correctly, sounds like the machine is humming a loud noise
Soap door on my Whirlpool dishwasher model # DU810SWKU0 does not open.I had inner door off to check rinse agent problem.Is there something i did putting inner door back on? If I close soap door and turn timer knob on outside of door the soap door will open after I make two full turns of the knob.If this cant be fixed can I just put soap in the bottom tray that has no door or put soap in both trays and do not close the soap door? Thank You RH.
... Whirlpool 24 in. DU1100XTP Built-in Dishwasher
The latch won't engage, so the door won't close. Obviously, this means the machine won't operate. We have removed the racks, checked the hinges to see if anything is lodged there and looked to see if anything is in the unit preventing the door from closing. Could the latch be broken? If so, what is involved in the repair?
... Bosch 24 in. SHV57C03UC Built-in Dishwasher
When I first contacted you, I couldn't get the soap door to close in my dishwasher. As suggested I got the part. I now have the door apart. When I work the soap latch I can't see what closes the door. The part I was going to replace seems to be working correctly. over
Well IF the piece, the latch, seems to be working OK, then the only other thing it can be, is the Electronic "Drive" from the controller board, or a disconnection between the Controller and the Latch, Sometimes it can be a "Sensor" not allowing the ... Dishwashers
My fisher paykel top draw does not close fully and therefore when it operates its floodsa nd the f1 code comes on. I know how to clean and reset it but not sure why the door will not close fully, I can still see the touch buttons when the door is closed,thats not right.
Check the draw on the sides at the front as the draw sits on runners and there are tabs on the runners at the front which hold the draw on.\015\012hold the plastic tabs both sides and slide the draw past the slots on the bottom sides of the draw. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
My soap cap remains in the closed position at all times. The clasp mechanism works fine, if I cycle through with the door open I can see and hear the catch release when it should. But the door remains closed at all times. I leave it open to run, and sometimes it's closed when the wash cycle finishes! Is there an easy way to take the cap off and clean it? Or do I need to WD-40 around it?
There is a little spring in there that flips the door open, just take the screws off of the side of the door, you'll see the broken spring by the door, make sure power is off to dishwasher ... GE Nautilus 24" Built-in Dishwasher
Prima lpr601 problem- filled dishwasher up sa normal set the wash pressed button on far right (dont know what it is but needs to be done), closed door and loud raattling so i opened door to make sure all spray arms were clear which they were, closed the door , again the rattling . now the green light has gone out on far right and cant get it back on so program wont start at all. Any advice?? please help
I cant get me dishwasher to start i have tested the overflow switch and its fine i have also tested the water inlet valve and its is fine. but it will not fill the dishwasher with water i have even removed the hose to see if there was any blockage in the line come out from the what inlet valve. the button light up on dishwasher and the cycles work a long with the start button, i have left the door open to see if the door senor could possibly bee an issue and it tested good and function correctly
Hi.If there is no voltage to valve, then parts that can be responsible are only and all the following:Overfill switch or overfill device.Door switch.Electronic control Wiring.If the overfill switc ... Dishwashers
The door won't close. The trays seem to be going all the way to the rear but they aren't far enough back for the door to close. Something is wrong
First make sure the trays glide smoothly and one side or the other has not fallen off one of the tracks. Next, make sure the the rear sprayer supply port is hiiting directly into the hole. If you look at the very back you will notice this port hole ... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher
Our normally quiet Bosch SHX36L Dishwasher has started being noisy while running. I found if I lean on the door it closes a bit, and the sound returns to the level it used to run at. It appears that the door isn't closing tightly anymore, but we can't see an obvious fix for this. Thanks for your time!
Your lock plate inside the machine can be worn but it can also be the gasket of the door. Door gasket is the easiest fix ... Dishwashers
Kitchenaid model kudso3ctblo, Type 577-0 Ser. FU3202943 When the dishwasher is finished, the soap tablet is still inside the dispenser & the door is still closed. We can open the door by hand & see that the soap has not dissolved. We found a tiny spring on the floor last week. Is there a metal spring in the dispenser? Could this have broken off & now keeps the door from opening?
Hi, we are trying to install our new Bosch dishwasher model: SMU68M05AU. I am surprised to see packing foam and flimsy edging across the top edge that meets up to the stainless steel door edge when its closed. I can not find detailed installation instructions. Is there not a strip that goes across the top to meet the door as the top looks very ugly? The dishwasher door protrudes from the under bench cupboard space so the top part is in view and exposed.
Thanks for your question!I'm sorry that you haven't received an answer yet.The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:1. the question is unclear, incomplete, or poorly ... Bosch Dishwashers
The detergent dispenser [Main Wash] door doesn't stay closed. It seems like there is something wrong with the latch, but we can't what. We've cleaned it, but don't know what else to try. There don't seem to be pieces missing or broken. But no matter what, when we put in the detergent [we use the cubes] the door always just pops open and the detergent ends up falling to the bottom on the dishwasher. The dishes are still getting relatively clean, but we want to solve the problem with the door
... Frigidaire FDB1200RG 24 in. Built-in Dishwasher
My whirlpool dishwasher type 280-2 detergent door will not open during wash cycle. Yes the compartment, springs and door are thoroughly clean. Will not open if I just close the door and remains empty. I'm wondering if perhaps I knocked off some random part that makes it open. So please tell me how darn thing opens and perhaps a pic of the parts so I could see if ones missing. Thank you for any help offered for this, its driving me nuts.
Whirlpool quiet partner 2 Water leaks from the bottom of the door, alot of water, we can watch it pour out. The door is closed all the way. I dont see a gasket along the bottom of the door where it would hit the frame of the washer,
\012Hello, Thank You for using FixYa. I will be helping you today.There is no seal for the bottom it is an air gap. If there is a damaged lower spray arm or crack in it water will come over that edge. Check the spray arm for damage. Open the do ... Whirlpool GU2400XTP Built-in Dishwasher
My dishwasher door doesn't close properly. It has a panel on the outside and this seems to weigh down the door so it drops. I want to know if the door can be replaced. The model number is ACG9544 (at least I think so, some of the numbers are difficult to see! It could be ADG954 A, or ADG) Can you help?
Take the lower pannel off the bottom and look to see if you have a broken spring.you can order a new one on the sears website. ... Whirlpool Dishwashers
Door problem Hi, I'm not sure of the model number but our Miele dishwasher has a very tight springback action on the door. This must be adjustable but I cant work out how! It is very tricky trying to load and unload when the door wants to spring closed all the time! Thank you, Sue
On my machine there is a torx screw at the top left hand side. You need to open the door to see the screw which sits behind the off-white flange (look for a hole in the flange). ... Miele Premier-Plus Built-in Dishwasher
Kenwood dishwasher kdw8st2a replaced door lock mechanism, door closing properly and program selection available but none of the program's will start. When I shut the door I just have an intermittent beeb and no error message. Any solutions?? Been trying to see if I need to reset anything but can't find a solution. Thanks jo
Door of Indesit IDL40 slimline dishwasher doesn't close
... Indesit 18 in. D41 Slim-Line Free-standing Dishwasher
Bosch she33mo5uc - cant close door
... Bosch Evolution 300 SHE33M05UC Stainless Steel Built-in Dishwasher
I am not happy with the racks in my new Bosch dishwasher! The bottom rack is not right! The silverware basket is in the back right corner and the silverware catches on the seal on door and it is hard to get to. The tongs are two close together and point the wrong way? The upper rack's tongs are also to close together also. I don't seem to be able to get larger dishes in with these tongs in the way. Having never used the mdl 9000359119 Rev B I had no idea. Buying a Bosch ment quality to me
... Bosch Dishwashers
I have an Indesit DV62WHUK dishwasher and the last night the door made a banging sound when it was opened and now it won't close and will fall back under it's own weight. I suspect either a spring, spring cable or a hinge has broken. How do I check this? Is the spring mechanism in the door or main unit?
There is a plastic unit behind the door handle which houses a spring under tension. This latches the door closed and makes the electrical connection to allow the machine to work properly. You need to buy a new unit (\302\24315) which is a bit fiddly ... Indesit 23 in. DV62 IX Built-in Dishwasher
I fell on to the dishwasher door when it was open and now the door will not close properly,therefore can't use it. hinge seems to be bent need to see what the hinge looks like before attempting repair
You'll have to pull the dishwasher out from under the cabinet to get to them. ... Dishwashers
I have a Bosch dishwasher Model SHE58C05. This model has two displays, one on the front where you can see and one with the hidden controls that you can't see when the dishwasher is closed. The display in the front all of a sudden stopped working today. Top still works but I can't tell how many minutes are left while its during the cylcle. I did have to cancel a cycle this morning because I picked the wrong one. Is it possible I hit a strange sequence and somehow cancelled this display (wishf
If you check your user manual there is a section that will guide you through turning off/on the display screen. I have tried to include the link for Bosch manual downloader but their site is down at the moment. If you do not have your manual and ther ... Dishwashers