Having problems with your Dishwashers ?

My matsui MTT4W is showing E4 after wasing, i have cleaned the filter, but cannot remove the watwer sprayer out to see if it needs cleaning also. What can i do next?


Answers :

Hi.

E4 means that the anti-flood device has been activated.

Try first disconnecting the appliance, if there is water in the tub, remove it using a sponge and try powering back on.

If that does not fix the problem you will need to remove the panel under the door, to gain access to the anti flood device located at the base of the unit.
In there you should find a reservoir clipped on both side, it must be emptied and cleaned.
All the operations must be done with power off.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My matsui MTT4W is showing E4 after wasing, i have cleaned the filter, but cannot remove the watwer sprayer out to see if it needs cleaning also. What can i do next?


Hi. E4 means that the anti-flood device has been activated.Try first disconnecting the appliance, if there is water in the tub, remove it using a sponge and try powering back on.If that does not fix the problem you ... Dishwashers

I need to clear out broken glass from the gray pan underneath where the water drains to, but I need to take the twirling water sprayer off first to get to the next piece that looks like it is bolted down, and I cannot see how to remove the twirling sprayer part. The piece in the center of it does not appear to be a screw off part, so I am at a standstill.


Hold the twirling sprayer part and unscrew the big round nut part just above it, then you will see a 3/8 nut,remove it and sprayer arm will come off ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

I have a whirlpool GU2700XTSQ1 dishwasher. I have the typical top rack not cleaning problem. I have removed the rear washer tube that leads to the top sprayer, no clogs. Upper arm is clear, lower arm is clear. I also removed the lower cover, checked the chopper screen and inlet, no clogs. There is a screen inside that I cannot get to. It appears to have some sort of paper or cloth sticking through the screen with a 50% block. Perhaps a sticker or label from a dish. I see this screen when looking


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

We recieved a dishwasher that had tons of lime and scale. well i remove that mostly by hand by taking the bottom part and disassemblying it and soaking it in CLR and slowly removing the calcium lime and whatever else there was. but i am kind of a thorough person and the bar =on the back of the dish wash needs to be removed and the back of it cleaned and probably soaked also if not replaced but i will just clean it for right now if i can. HOW do you remove it? I need a step by step on how to remo


Instead of going through all that effort, and still not being able to get to everything, just use a product called "Dishwasher Magic". It is a dishwasher cleaner and disinfectant, and cleans limescale and rust out of the dishwasher by just running i ... Maytag 24 in. MDB4600A Built-in Dishwasher

Kenmore ultra wash #15765 will not drain. purchased 1996, web says no such model exist, but i have the manual, and it does, i need help . I have taken out the lower sprayer arm and the spinner that chops up the food left, even removed about 10 screws that hold down what looks like a filler but it did not allow me to remove it. How do i access the drain to see if it is stopped up. Do i need to pull it out from the counter and go from the drain hose,or somehow go in from the bottom??


... Kenmore Dishwashers

Just looking for some advice on removing the drawer from my servis washing machine, sorry I dont know what model it is. I need to clean the powder drawer but cant find any way to remove it from the machine. There is no internal part marked push that i can see and im wondering if i need to unscrew the four screws around the drawer. Help please! Cheers


Send an email to this address asking for the user guide for your model \015\012\015\[email protected] ... Servis Dishwashers

I have a MODEL 577-0 kudk01ILb55 KITCHENAIDE dishwasher. I am trying to remove the inner pplastic bar that goes vertically through the system from top top bottomj so that I can clean out the filter. But I do not see how to remove that bar. I have looked online for a repair manual of some type but have been unsuccessful. Can someone tell me how to remkove the bar so I can get to the filter on the bottom? I have already removed the star shaped rinse sprayer.


... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher

My Kitchen Aid KUDS01DJSS0 seems to have water going to the upper spray arm (I see water coming out of the unit just beneath the upper rack), but the pressure doesn't seem to be high enough to clean the upper rack. No evidence that water is coming out of the spray arm on the very top. Lower rack dishes seem to clean OK. I have already removed the whole upper spray arm assembly and inspected the flapper valves that the middle sprayer goes into. I suspect that it's not making good enough contac


... KitchenAid Dishwashers

I have model DU810SWPU3 Whirlpool dishwasher that is 1 yr old. Plastic dishes appear to have a film on them when cycle is complete. The water also seems to drain slowly. I assume that what appears to be the filter needs to cleaned but I'm not sure how to remove it to clean it. Is the plastic area with all of the square holes on the bottom of the appliance the filter? That part is what seems to be clogged. Thanks!


The problem is hard water. There is a new product out called the dishwasher filtration system. It filters the water before it enters your dishwasher. It works amazing and has a money back guarantee. You will love the ... Tappan 18 in. MDR251RE Built-in Dishwasher

My KichenAid KUDS011 has functioned well until this morning. When I push any of the buttons on the keypad, nothing happens. I noticed there is still water in the bottom of the dishwasher from the last dish washing. Also, I've heard there is a screen or similar part in the bottom of the dishwasher that needs to be cleaned occasionally. I haven't figured out how to remove the bottom center of the dishwasher to access this for cleaning.


If the drain or screen are clogged, the machine may no operate.Unscrew the the 2 long screws on bottom, remove the basket, there may be a flapper under the basket, For pics, see here: http://www.contractorssolutions.com/dishwashers. ... Dishwashers

Previous wash cycle worked perfectly. Next morning , dished not washed. Water pressure is insufficient to spray. Checked sprayers and clean. Removed bottom sprayer arm and tested. Water flows barely. Water fills but pressure insufficient to spray. Actually 'bursts' slightly on shutoff. All other functions work perfectly.


... Kenmore 16872 Built-in Dishwasher

My dishwasher spray arms were clogged with calcium buildup so I cleaned one and replaced the other. I also removed the fixed disc-shaped device underneath the lower spray arm and found the particle filter was clogged- so I cleaned it out. The dishwasher ran fine for a few times but then the filter clogged again, and again, and again. Now I need to make a routine of disassembling the parts to get at the filter every week because the filter no longer clears itself during the wash and/or emptying c


You may want to check your hot water tank. It may need drained and cleaned, Or you may have the rod in the tank disintegrating. Also check you water faucet areators to see if they have calcium pieces too. ... Maytag Dishwashers

No water The serial number is not my dishwahser, however mine is about 6+ years old and has worked fine, I keep it in fairly good order, cleaning rotar arms weekly and filters as often as needed. Yesterday 4th August the timer which is a dial type, was getting as far as the next section and stopping, also it would seem that no water is being drawn through the arms. Are we near the end of life or is it fixable?????


Check first the filters on the inlet water line.\015\012Then, if problem still exist - check that the inlet water valve works(it is an electromagnet valve, located at the pipe's entrance to the machine)).\015\012If it doesn't work, test that it get ... Neff 24 in. S5409X0 Built-in Dishwasher

Hello, we have a Frigidaire dishwasher Model# FDB1250REC2. There was all kinds of junk down in the lower filter area and when I tried to remove the parts they all came out together and then fell apart. I need to see how the parts go back together, because I thought I had them in there correctly, but when I opened up the dishwasher after running it the water sprayer was laying on the heating element. Could you please help me get it back together right? Thank you


I am having the same problem...were you able to fix it? ... Frigidaire Dishwashers

I have a Maytag portable dishwasher. Lately it has been sounding like the top sprayer is working only sporadically. The cycle begins & it sounds like it doesnt begin spraying until halfway thru the cycle. I open it & check it & see it's not turning. I've cleaned out the holes the best I can. It does this with the rinse cycle also. THANKS FOR YOUR HELP.


I will need the full model number of the dishwasher before I can start diagnosing the likely problem. Is it possible to find this please? ... Maytag Dishwashers

I have a SGS53E72AU and it isn't draining away. I have cleaned the filters, checked to see that the pump isn't blocked by removing the cover and also checked for kinked hose. It is 2 and a half years old. Any suggestions would be greatly appreciated thanks Sally


First of all you must set the machine to a soft/quick wash and let the cycle run. During the process of the program check the voltage on the pump during the drain cycle. It is important that the controller unit supplies voltage to the pump. If power ... Bosch SHU4006 Dishwasher

Dishwasher Normally, after the dishwasher cleans the load, it displays green light next to clean. Once the door is opened, the light goes off an dishwasher is ready for next load. But from few days, after opening the dishwasher door, the clean light does not go off, it remains lit. Dishwasher doe snot reset for next cycle. So, I have to go in the basement and trip the main power to dishwasher. That resets the dishwasher. This needs to be done before each cycle. Not sure how to resolve the issue.


Make sure that you do not open the door during the wash cycle. Wait until all the cycles \015\012are complete before opening the door. Especially don't open the door \015\012during the drying cycle. ... Dishwashers

Moderl MDB5000AWW how to remove the water sprayer to clean. jam


... Maytag Dishwashers

- the dishes and glassware on the top rack are not coming out clean - I checked the course strainer to see if it is being blocked but don't see any thing there - I also took out the spray arm that sprays up into the top rack and ran water through it with a hose - it also appears to be free of clogs. - I don't see the spray arm spinning when I open the door during the wash cycle - - lastly, it may be unrelated, but the dishes are not coming out of the washer as hot as they used to be any i


... KitchenAid 24 in. KUDI01DL - Multiple Color Built-in Dishwasher

WONT WASH CLEAN ALWAYS RESIDUE LIKE SAND ON GLASSES ETC. THAT IS ALMOST IMPOSSIBLE TO EVEN REMOVE BY HAND WASH ENOUGH SALT AND RINCE AID ALSO CLEAN FILTER EACH TIME NO OBSTRUCTION IN PUMP FILTER THOUGH HAS AN ORANGE COLOUR SALTLIKE SUBSTANCE INSIDE BRAND NEW MACHINE STARTED WITH BAD WASHING RESULTS AFTER COFFEE PLUNGER WAS NOT CLEANED PROPERLY AND GROUND COFFEE LANDED IN MACHINE ALSO POSSIBLY OUR HOUSECLEANER MIGHT HAVE USED ORDINARY TABLE SALT INSTEAD OF DISHWASHER SAL


Use CLR to remove any build up and then use LEMI-SHINE (walmart in dishsoap aisle) for the cleaning of your dishes. Works great for me as i have the worst well water on the planet. ... Dishwashers

I have a KitchenAid Sculptura dishwasher and it have been leaving food particles on the dishes. I started to take it apart, removing the bottom spray arm. I can see a lot of old food underneath. I'm having a hard time removing the next piece. There is a 1" rubber nut with a screw in the middle. Is this the next step for removal?


Hi\015\012\015\012Thanks for using FixYa. Please post back with the model no of your Kitchen Aid Sculptura Dishwasher so that I can further assist you.\015\012\015\012\015\012Thanks\015\012Ryle ... Dishwashers

Miele dishwasher G2870 scm. There is an F14 fault. I have cleaned the arms removed the waste basket from the bottom of the dishwasher and removed the two parts one with the large metal ball to expose the plastic wheel clog. There does not appear to be a blockage. I also removed the top arm and cleaned that out. I don't know what other inlets to check as the guide does not tell me exactly what an F14 fault is but explains F11,12,13. Can you help?


F14 on your model of dishwasher is indicating a blockage, poor water\015\012pressure or could be a fault with the pump pressure level switch or\015\012circulation pump.Filter and non return valve is cleaned of any blockages and if the fau ... Dishwashers

My Maytag dishwasher model #MDB4650AWW bought in 2005 has developed several ongoing problems. The first is that the dishes get clean but there is always sandy dirty dried bits left on the glasses. The utensils are clean and the dishes in the bottom rack are clean but the glasses also have this "residue" left on them. I have tried different detergents and rinse agents. I have also added a rinse cycle as well. Nothing works. Now, I am seeing this sandy dirty debris dried bits in the bottom o


... Maytag Dishwashers

Upper spray arm is not turning and I don't think water is coming out. Dishes on top are not coming clean. Dishes on bottom are clean (as clean as they get with this dishwasher). How do I remove upper spray arm. Also I'm not sure how to remove lower dish rack to access upper spray arm. Any help appreicated. Kitchenaid model KUDP01FLSS5 Chris


Hi Chris,It sounds to me like a restriction in the pump. I put together some information here on cleaning it out. If you try these please give me some feedback as to if they help or not.Thanks! ... KitchenAid 34 in. KUDP01FLSS Stainless Steel Built-in Dishwasher

I have a triton xl model @ gsd6200g00bb serial #va790400b. The dishes on the top rack are not getting clean. I have removed the top, and middle, and bottom arms cleaned calcium out of them. Removed the screen below the lower arm cleaned. The top and middle arms are still not spinning during wash cycles. Where do I go next?


Apart from the spray arms themselves there could be other reasons why the water is not getting up to the middle and top arms.\015\012\015\012The distribution circuit from the wash pump that feeds the arms could be blocked or the wash pump ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0980 seconds