Having problems with your Dishwashers ?

I have buy a GE GSH 5530 dishwashers used. Now i have install it but i can start the machine. nothing happens


Answers :

Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have buy a GE GSH 5530 dishwashers used. Now i have install it but i can start the machine. nothing happens


... Dishwashers

I'm having trouble starting my ge profile dishwasher; the machine locks but then when I push the start button one of three things happen: 1) I get error C3 and I do not have a user manual) 2) nothing happens 3 I get the screen indicating that the machineis a sensing soil level, washing' but in fact nothing happens - I do not hear the motor starting and no water runs, thank you!


... GE 24 in. Profile PDW7800 Built-in Dishwasher

I have a maytag dishwasher mdb5601awb. when I hit the start button nothing happens. I have found the instructions to do a manual test which is hitting the heated dry button 5 times and then the start button. Thinking it will run some test which I have no idea what to look for, it actually runs the machine's wash cycles and clean, dries and tells me it clean with the green light goes on. How do I reset/reboot the machine so it starts by just hitting the start button again?


... Maytag Dishwashers

After dishwasher was started, and water stared to enter the machine, it was unlatched and left with the lever in the open position for some time. The control dial had automatically moved 5/6 degrees clockwise and left there. Now the machine does not want to start no matter what I do. Power is to the machine, latch is moved to the right, but nothing happens. What's next. Thanks for any help you can give.


Hi,\015\012 \015\012After the water stops coming in do you hear a humming noise? If so the motor may be stuck. Unlock the door to disconnect power from motor then turn the motor by hand a few times (should ... Dishwashers

Stops part way through programme water still in machine. Now no power to machine. Problem happened yesterday - cleaned filter and pump - power came back. Programme started but then stopped. No power - nothing happens.


Either there is a bad capacitor in the control panel, or the power supply has a faulty capacitor. You will have to get a multi-tester and test each component for resistance and current ... Dishwashers

Bosch Shu43C02UC dishwasher fills with water but the washing won't start. As the filling nears complete, a double clicking noise occurs to start the washing motor but nothing happens. The time continues to countdown but the machine is silent. When I open and close the door, the click click noise is heard but the machine is silent. I can cancel the cycle and drain the water but none of the washing or rinse cycles will activate but the timer works. The soap door even opens if the timer is left to


Have you checked the inlet water temperature is at the correct level for the dishwasher.\015\012\015\012Please provide the full model no. of your dishwasher -- Shu43C02UC /??\015\012\015\012I think the problem is linked to th ... Bosch 24 in. SHU43 Built-in Dishwasher

Zanussi zdt6053 in built dishwasher not starting. When pressing the control panel on/off button the 65 deg normal wash light comes on. When pressing the program selection button nothing happens. When closing the door the machine does not start up. Is there a fault in the control panel circuit board? Would water pressure prevent the machine from operating?


... Zanussi 23 in. ZDi6053SX Built-in Dishwasher

Machine starts fills Ok but when it clicks on to start the wash pump, nothing happens, I can hear a faint hum. When cancelling wash and starting new wash it pumps out ok too. After rinse cycle it indicates a completed wash, but no water has been pumped through washer arms.


Sounds like your main circulation pump is not working, if it is humming when it is supposed to start, sounds like it is getiing power, so probably not the control circuits, can you measure voltage to pump?if you are getting 120 there, probably pu ... Asko D1876 Dishwasher

I just went to push start on my ASKO D3232 dishwasher and nothing happened. I can turn the machine off and on but it's frozen when on. I can't change the programming and the start button just flashes and won't start.


... Asko TouchProof D3232XL Stainless Steel Built-in Dishwasher

I did the setting of my Frigidaire Gallery Dishwasher as every morning: set "both rack/ Hi temp wash/ Sanitize / Power dry off, and the related lights are all on, then I pressed the "Start" button, but nothing happened. The machine didn't start working. Model: PLDB998AC0


... Frigidaire 24 in. PLDB999S Stainless Steel Built-in Dishwasher

Ge dishwasher model gld5560l00ss --when you hit start nothing happens - if you hit start again , light on any selected switch begins to blink. have tried rebooting control that was suggested in owners manual by tripping breaker and then resetting after 30 seconds, ( this did not change anything). machine makes no noise but lights do come on.


... GE Dishwashers

My beko DWD8650 dishwasher has stopped working - when I switch on the power, the machine sounds as though it is trying to work, even though the start button has not been pressed. Once the start button is pressed, the timer does not count down and nothing else happens.


... Dishwashers

Hotpoint dishwasher lft 114 - machine will not start the wash cycle - power light on, can step through each program usign the Program button, but when the door is closed nothing happens. No residual water in machine as far as I can see. Any ideas?


... Dishwashers

When I switch on my dishwasher setting it at normal wash cycle it appears to start as normal then after few seconds goes onto to Eco 45 c wash - the light flashes but nothing happens i.e. no water comes into machine - any suggestions.


You may want to check and clear the pump\015\012you have something slowing your drain\015\012 but for giggles make sure your float valve is free to go up and down like it should\015\012 all dishwashers attempt to drain first\ ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

The power button will not work. All other buttons are lit, but when pushing the button to start the machine, nothing happens.


... Maytag MDBH985AWW 24 in. Built-in Dishwasher

Hi, I have an Electrolux ESL4115 dishwasher. There is power to the machine. There are no fault lights showing and the programme selection won't move from the 65 degree programme. When I close the door to start it nothing happens. Any ideas what the problem is please? Many thanks


... Dishwashers

The dishwasher lights turn on but when I press "normal" nothing happens, the "dry" sign is on but not "wash" and rinse' I bought the machine second hand so I haven't got the manual or the id np. I was told it was a $600 model. Can you help, I don't want to have to buy another one. Elizabeth .


May I get the name of the buttons on the dishwasher to help you more. It sounds like the child lock is on and needs to be turned off. Please reply with the button names.\015\012\015\012thank you ... LG Dishwashers

Hi, I have had a few issues with my ST663 machine. The current problem: the rinse cycle light keeps flashing and it doesn't start when you shut the door. I have tried holding down the right button but it beeps twice and nothing happens? Also tried holding both buttons down for a while and still no success. I got a new electrical board installed not that long ago so not very happy hoping it not a big issue. Do you have any other things that I could maybe do?


HiIf you have already tried to reset the unit by pressing the High Temp wash-heated dry button for 3-4 times in sequence then the problem is either with the door switch or the keypad itself that has gone bad and should be replaced. Hope t ... Dishwashers

The electronic panel on the top of the door doesnt light up anymore and is unresponsive, when the power is turned on, the machine makes a sound like its running or draining or something, but nothing is happening. This all started after a potential electrical disruption following a power outage. Perhaps there is a fuse or some relatively easy way to fix this? or am I screwed and should just call a repair man. Thanks for your suggestions, Brodie


... Bosch 24 in. SHX56B05 Stainless Steel Built-in Dishwasher

My control panel panel has the normal wash and heat dry buttons are lit and nothing else happens. it will not allow me to turn the machine on. the start reset button does not operate the dw


Sounds like it is either a door switch problem or an electronic control problem. Best off to call a reliable service company such as Sears. ... GE Dishwashers

When I select a programme the first indicator lamp (wash cycle) does not light up, only the second lamp (drying) and if I press start nothing happens. I have checked the water supply and that is fine, I have turned off the machine and plugged it back in-but it is the same.


You allow it for 2 hrs. May be in the mid of the cycle power failure would have occurred! It will complete the full operations and will be back to normal.Check the manual for resetting procedure if you are not getting the machine to norma ... Dishwashers

I started the wash cycle and a few minutes later I noticed nothing was happenning. It appears there is no power to the machine but the dedicated breaker is not thrown. Any reset or such?


A fuse behind panel. if good check electrical junction box under in toe panel. where cord connects to unit ... Dishwashers

My fridgidaire dishwasher model FBD1050REC4 will not run. When I depress the start button the washing light comes but nothing happens. The delay wash is not set. Last I turned the machine and this morning the clean light was on but the washer never ran.


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. If the clean light flashes, pauses, and then repeats. When\015\012the dishwasher doesn't sense a water t ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

Balay slimline dishwasher. When switched on and programme selected, appears to start with water entering the base on the machine but then nothing else happens. Able to empty water out by resetting and chosing rinse programme.


... Dishwashers

Stopped Working Hi, My Zanussi Aquapulse Dishwasher (DE6744S)has just stopped working. The red on/off switch still lights up when I try to start off a wash but nothing else happens. I know this is probably just a case of "call out a repair guy" but, even though I've had the machine a few years, I'm I bit miffed on the thought of coughing-up to have the thing repaired because I very rarely use it. Any suggestions? Many thanks


The problem is with the PCB, this is the board behind the buttons, you can buy this for £120 or you can get it fixed by QEA for about £45 link below. I am not an engineer but I replaced mine in 10 minutes.\015\012 ... Zanussi 24 in. DE6744S Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1176 seconds