Having problems with your Dishwashers ?

Our Kenmore Ultra Wash Quiet Gaurd is not quiet. Could there be something wrong with it? Also, how long are the normal, pots & pans, and smart washes supposed to last? The model # is 16512200, Serial #FM3107487, stock #16512, and Type # is 575.0. Thank you for your assistances.


Answers :

Hi,
Everything you are asking is or can be relative. The noise issues is a matter of personal preference and what is quiet to someone else may not be to you...
Make sure that ALL parts were installed and installed correctly. If the blanket that often covers the dishwasher to absorb noise gets pushed off or bunched up the dishwasher can be very noisy. If the kickplate insulation is missing the appliance will be noisy. To check these parts the dishwasher may have to be pulled out, checked, and reinstalled.

The times also can be dependent on the loading, the amount of food on the dishes that you are washing and the water pressure of the water coming in to the dishwasher. without knowing all of these things I cannot give you an answer that could be taken and used with any reliability.

Speaking VERY generally I would expect the normal to last somewhere around and hour, the pots and pans to be 1.5 hours and the smart wash to last somewhere from and hour to two hours....that one is really variable!

I really hope that this gives you the info you are looking for and that it has helped you out!

heatman101
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Our Kenmore Ultra Wash Quiet Gaurd is not quiet. Could there be something wrong with it? Also, how long are the normal, pots & pans, and smart washes supposed to last? The model # is 16512200, Serial #FM3107487, stock #16512, and Type # is 575.0. Thank you for your assistances.


Hi,Everything you are asking is or can be relative. The noise issues is a matter of personal preference and what is quiet to someone else may not be to you...Make sure that ALL parts were installed and installed correctly. If the blanket ... Dishwashers

I have a Bosch dishwasher model SHE4AP02UC/06, serial number FD901102579 that has been used twice since installation. When I select the Regular Wash cycle, the Regular Wash LED and the Active LED come on. The machine washes the dishes and then when it stops making noise. At that point the Active LED goes off and the Clean LED comes on with the Regular Wash LED. These LED's do not go off. There is no signal saying that the dishwasher is finished. Is this the way it is supposed to be operating or


Ya id say until u open the door after it has washed ... Bosch Dishwashers

I have a Kenmore elite ultrawash HE dishwasher Model 665.13129K700 , serial # FU3801153 , Stock # 13129K , Type 586-0. My normal wash red light flashed constantly and will not allow me to reset the control panel. I disconnect power for 1 hour then it allowed me to run 1 cycle. Upon completion the normal wash red light started flashing again. I tried to toggle between high temp wash and heated dry but no other button will work since normal wash is flashing. I again disconnected power but this tim


Hi,Push push thishi temp wash / heated dry hi temp wash / heated dry hi temp wash / heated dryIf this does not reset the control then you will need to replace the control board.Let me know,if needed fur ... Dishwashers

Detergent dispenser My dishwasher is a Maytag jetclean series 01, model # VU304, serial # 218223 . The dish degertent dispenser won't flip open. I am not sure when it is supposed to do so during the wash, so I go ahead and flip it open manually during the final wash (when I remember to do so). Hope this is an easy [email protected] Thanks loads


... Maytag MDB9600A Jetclean II Built-in Dishwasher

How old is our dishwasher. Kenmore Ultra Wash Quiet Guard. Model # 665.1552200 serial # PF0860551 Stock # 15522 Type # 280-1


... Dishwashers

SERIAL # NEX725476 CRAIG N DOUGLAS 63 14TH AVENUE TAURANGA I bought my new model double dish drawer DD60 model thru Noel Leeming on the 29.07.2009 (inv 104174599 Cust # 5321218) I have already written a strong complaint about this useless dishdrawer some months ago. I was asked to provide the serial number, which I have done as above. I am still totaly unhappy with this dishwasher. Where does it say in the manual that you have to buy expensive dish tabs, with power balls, & wash every wash


... Fisher and Paykel Dishwashers

Here again is my model and serial it stops in the middle of the cleaning cycle Kenmore 665.16773402 serial # ft0302854 Here is how I have been resetting the dishwasher. I hit the following sequence of buttons: Normal Wash Heated Dry Normal Wash Heated Dry Normal Wash After that ? all the lights are lit up as follows: Smart Wash, Pots Pans, Normal Wash, China Gentle, Turbo Zone, Hi Temp Wash, Sani Rinse, Heated Dry, Sanitized (Green light ? not a button), Lock on (Red Light ? no


Door latch.Open and close the door to make sure the door latch is securely fastened\015\012 \015\012Hi-Temp Wash, Hi-Temp Rinse, or Sanitize options.Some models have options that may requi ... Dishwashers

I have a Bosch dish washer model SHX 43 M 0 ZUC / 48 FD 8709 00169 The dish washer is about 1 1/4 years old and was installed by a plumber as part of a Home Depot kitchen remodel. The problem is draining. The quick wash does not drain at the end of the wash. The regular wash sometimes drain and sometimes does not. The auto wash does drain. The lack of draining does not cause problems with the regular wash cycle. I checked the drain hose re the instruction manual and it is correctly installed.


Usually a brush with a flexible shaft will do the trick...\015\012\015\012Like this venturi tube cleaner (available where gas grills are sold)\015\012\015\012 ... Bosch Dishwashers

I have a Kenmore Elite Ultra Wash HE. Model #66513122K701. Serial #FY0310281. Purchased New 1/31/09. It only works for a full wash cycle on on 1 hour wash. Super Wash and Normal wash both stop mid cycle and leave dishes sopping, dipping wet and with green light blinking. Been doing this almost its entire life...has ahd control panel replaced once under warranty...but if it is a factory defect...they probably just repaced it with another defective part...what to do? What should I do.


... Kenmore Dishwashers

We have a Kenmore Ultra wash dishwasher Model # 665.13733K601 and serial # FW18136133. came home from work yesterday and the pots and pan button and the normal wash buttons were flashing alternately. When I pushed the cancel button it started to flash, then I pressed the smart wash button and now its flashing. I turned of the breaker for awhile and then back on and the lights weren't on right away but later started flashing again, and I can't get the dishwasher to do anything. Any help on my pro


Hi,\015\012That unit took a power surge and the control is now bad....those controls can all of a sudden go wacky and the usual cause is power problems...\015\012The only way to fix it will be to replace the control...\015\012 ... Dishwashers

Zanussi Aquasave ZT.685 MODEL TOYPE 911N83-7F SERIAL NO. 04450004 PROBLEM: UNIT IS SWITCHED ON. UNABLE TO PRESS SWITCH TO SELECT WASH PROGRAMME. SWITCH DOES NOT APPEAR TO ENGAGE EVERYTIME. INTERMITTENTLY THIS DOES WORK AND WASHES ON ONLY THE "QUICK WASH" PROGRAMME. WOULD BE GRATEFUL FOR YOUR SOLUTION.


... Zanussi Dishwashers

When I press the start button, Bosch dishwasher (model SHY56A 05UC) just keep running the motor pumping the water out of dishwasher, irrespective of: 1) the wash cycle it is on, 2) whether the door is closed or open, 3) whether I cancel drain cycle, as told by Bosch Cust Svc in following steps: - "Cancel Drain" by pressing 'Quick Wash' and 'Regular Wash' buttons together for a minute until it shows 0* - Shut power off for a minute and wait for a minute - Restart on Quick Cycle. Paid


What is happenig i believe and has happened to me 2 times is that the water level float that is on the left side of dishwasher is stuck.\015\012\015\012Either remove side panel and flick lever or pull dishwasher out and tap lower portion ... Bosch SHY56A02 / SHY56A06 Built-in Dishwasher

I have a maytag jetclean dishwasher quiet pack. Model no. MDB4100AWW. Serial no. 15080242YY. The unit will not power on to wash. The push button indicators are on but the turn knob is turned to the wash setting and nothing is happening.


... Maytag Dishwashers

Kenmore model 665.17033403, stock 17033, when wash starts it reads sensing, makes some noise, reads washing but nothing happens


Hi \015\012\015\012Thanks for using FixYa. To resolve this you will have to reset the console. Do this by closing\015\012the door and press these buttons in sequence...\015\012\015\012\015 ... Dishwashers

KENMORE MODEL # 363.16222100 Hello - my dishwasher (model# above) is currently filled with H20 and will not drain/work. When the knob to select the dishwasher cycle to begin is turned, it just 'clicks' and does not engage the washing cycle. When I tried to just let it run the cycle as is to 'restart', it had an electrical odor to it., Currently the knob is at the 'Rinse & Hold-(Heated Dry Off)' part of the cycle and all dishes have been removed. I would appreciate any assistance available. Thank


Either the motor is locked up or the control failed. You will need a service visit. If it is over 10 years old, I would buy new. ... Dishwashers

Serial #88445-B Rym 717881 model # fpdd 603 We are getting a fill fault code when we start the dishwasher. When the alarm goes off we have to pause the wash cycle open the door and then close the door if we do this about 2 or 3 times it will wash. It seems it fill with water but it seems to be low on water Dave Heller


... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

MODEL#MWX233RES5 - Serial # XC: grinding noise in wash mode; has stopped working in wash mode- just a click when activating, but will work in spin mode while still grinding


HI. Ok, here the deal here; Your transmission will lock up soon. If it is not moving at all in agitation mode, it is already semi-locked, in a way. Frigidaire dose not sell the gear kits for this unit. with that said; i would inspect the hub to be su ... Frigidaire Dishwashers

Machine washing I need to know like is sistem trasmission drive of motor whit machine in the washing machine MODEL :LLR6144AQO SERIAL .CC1819282


What did you nee to know???? check that model doesnt seem valid, whose the manufactue, ... Dishwashers

Dishwasher motor sounds like its struggeling to run. oR LIKE it's bogging down during washing cycles any and all cycles. there is water going into the washer but when washing it sounds like there is no water moving around creating the motor to work harder ........sounding like its gonna stop at any second. frigidaire d/w model#= FDB510LCS3 SERIAL==TH74378818


Try pouring water from the front. The pump has got air traps inside. This will ease your problem.Also check whether the spray arm turns freely without any obstacles. ... Frigidaire 24 in. FDB510LC Free-standing Dishwasher

Soap dipenser My whirlpool built-in dishwasher model DU930PWPB0 serial # FR4104078. The door to the soap dispenser will not open. I have been washing the dishes with the door open all the time. When I close it(door) it won't pop open when it should. to dispense the soap in the wash cycle.


Try this... Wipe out the soap dish with white vinegar and a soft cloth.. make sure you get everything off the edges of the door and look for any nicks, blemishes or deformation of the dispenser door to make sure it is not mechanically binding up when ... Whirlpool 24 in. DU930PWP Built-in Dishwasher

Whirlpool Gold Quiet Partner IV Dishwasher, Model GU1500XTKT0, Serial number FL4104935, Type 575-0, during a Rinse Only cycle suddenly the cycle light began constantly blinking, which could not canceled or stopped nor placed into diagnostic cycle or other wash cycle. The repairman checked everything and decided problem was Electronic Control Module, which he replaced; blinking Rinse Only went off, but Normal Wash is now constantly blinking and repairman seemed confused and is wanting to repla


... Whirlpool Dishwashers

GE Profile dishwasher model #PDW7880N15SS Serial #RM863214B is not releasing water into dishwasher during complete wash cycle.


... GE Dishwashers

I have a disher model pd23081 serial no. me50837. When I put soap to wash the dishes the little door wont open. when we moved we bought the dishes from the women, and we don't have a book of institution, please can you send me one. my address is Mrs Helene Dion 267 Desmarchais, Verdun, montreal p.q. h4h 1S5


... Dishwashers

Leaking I have a Kenmore dishwasher,ultra flow,build in,What I can read the model is 665. serial # FH4608282 Stock 15791 I don't have the manual and I wonder if I could obtain one. Looking at the dishwasher I have a small leak at the botton left side. What can I do to fix it? Hope to hear from you thank you Maurizio Boni


Thats your in let vavle ,,mostly came lose,,open toe pansl,,and thighten connect,,always turn off breaker,,most dishwasher are not grounded in places... ... Dishwashers

I have a kitchenaid model KUDS01JBT dishwasher. The Chopper Assembly keeps pluging up causing the dishwasher not to wash properly. Can I remove the chopper Assembly and run the dishwasher without causing any further problems to the dishwasher or will it cause other problems with the pump etcetera? Thank you for your assistance. Sincerely, Pat


\015\012\015\012Check the water temperature. Should be 125 to 140 F. \015\012\015\012Check pump re-circulation., Listen, see if it sounds like it is spraying the water around with enough pressure. ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1478 seconds