Having problems with your Dishwashers ?
I have a Fagor 1VF-453IT dishwasher and one day I switched it on - it did nothing else but all the red LEDs (5, I think) started to flash. And that's it, it doesn't run.
No idea why, but I'd appreciate a hint before calling a mechanic or starting spending huge amounts for parts and repairs.
Any chance for a reset or something?
Thanks a lot!
Repair Help & Product Troubleshooting for Dishwashers
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Hi, I have a Fagor 1VF-453IT dishwasher and one day I switched it on - it did nothing else but all the red LEDs (5, I think) started to flash. And that's it, it doesn't run. No idea why, but I'd appreciate a hint before calling a mechanic or starting spending huge amounts for parts and repairs. Any chance for a reset or something? Thanks a lot!
My Husky HU 80709 gas pressure washer starts (most of the time) but if I shut it off to answer a phone call, etc.,I cannot get it started again. It's like it has a vapor lock or something. Any ideas what is wrong, suggestions to fix it, will be very appreciated. Thanks! [email protected]
I have the same power washer. \015\012\015\012When you go to restart it you need to hold the sprayer nozzle so the their is no pressure in the hose. It is even better if you take the tip off the spray nozzle and then while holding the spray no ... Honda Pressure Washer PSI 3000
Dishwasher "Ariston LS2450"UK .Problem is the Cycle switch mechanism started to smell on melted plastic and does not turn anymore.By the look of it is a bit melted.Think will need the selecting cycles mechanism (or so called part behind the knob for selecting the cycles)Appreciate your time.Regards Nik
Have Kenmore ultra wash model 665.1604, purchased in 2004. no problems until yesterday. Push start button after selected wash cycle/drying options. Cycle does not start, and start button just keeps flashing. Tried different wash/dry options all with same result. I am guessing the touchpad is shot, or problem/short in control module. any ideas would be appreciated. thank you.
Unplug the unit for 1 min then plug back in then test unit pcb controller should reboot its self. if this fails you'll need to send the complete model # on the inside of tub area ... Kenmore Dishwashers
I have a whirlpool dishwasher thats a quiet partner 2. the cancel drain light keeps blinking and nothing else is happening. i try to unlock it and then the normal light starts blinking also and still nothing happens. i called a local repair shop and they said i need to change the control board so i did and its still does the same thing. can you give me an idea of where i need to start to fix my problem?
Can you here the pump running or check to make sure there is no water in the base... ... Dishwashers
I have a hotpoint LFT04 dishwasher. Recently it tripped the power supply, and now when we start a cycle after a few minutes it stops and the lights on the power button and cycles 2 and 4 flash constantly. If the power button is turned off and the door closed, after a period of time it starts up again automatically. Any ideas appreciated.
Hi, I have a Fisher and Paykel DD603 dishwasher. The bottom drawer works fine but the top drawer doesnt work at all. It appears normal until the start button is pushed and then I get 3 very quick beeps followed but a 4th slightly longer beep. Then nothing happens, any ideas or help would be much appreciated. Thanks Neville.
... Fisher and Paykel 24 in. DD603MFC Built-In Dishwasher
Hi! Our Kenmore Ultra dishwasher is about 11 yrs old. Recently started overflowing onto the floor. Seems to be worse with soap, less when just water. Is this a problem I need to get a repairman or just use less soap? Checked the drain cycle - pump seems to work fine. Any ideas would be appreciated! Thanks AM from Portland
Try a gel and use less soap at first as an experiment they clean better and leave no film I/E electra sol gel ... Asko 24 in. D3250 Built-in Dishwasher
When I start my GE Quite Power 1 dishwasher it makes a rumbling sound eminating from the base probably the water spin mechanism that sits on the motor is my guess? As the cycle advances the noise continues, any idea what is causing the rumbling noise to occur during the wash cycle?
Your issue could be one of the following:\015\012\015\012* motor\015\012* water pump\015\012* vibration from some source \015\012\015\012Contact an appliance service company. ... GE Dishwashers
LCD is flashing on and off every 2-3 seconds and makes the draw opening sound as it does this. There are no fault codes, rather all signs illuminate on/off with LCD. Try to turn of with power on/off but just starts above within 3 sec of release of button. Any idea what is the fault? All help appreciated. Thanks
The controller is faulty. You will have to replace it.\015\012Make sure the power is turned off when you work on the dishwasher as it brings mains power inside the door area. ... Fisher and Paykel 24 in. DS-603 Built-in Dishwasher
NEFF S4443 top spray bar not rotating, no water. Bottom spray bar rotates and sprays water. Checked and replaced fine/course mesh filters. Will pump to empty and refill on pre-wash (rinse). Seems the pump may have two outlets one feeding the bottom spay bar (nearest from of machine) and one just behind which feeds the upper spray bar. Running without spar bars attached (including mechanism feeding to bar, water is only being forced out of the from outlet. Any ideas before I start taking it apart
... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher
I have a GE Evolution Quiet Power Plus dishwasher its in very good condition but after a wash cycle it leaves about 2 inches of water in the bottom of the unit,this just started about a week ago,ideas on a fix appreciated.
A serviceman just solved the problem in 10 minutes. It is the valve inside the dishwater at the back. It got worn after five years. Cost me 8$ plus the call. ... Dishwashers
My Amica zwm 616 Dishwasher won't start. It appears to be an error code as the wash light is flickering on and off quickly. Any ideas what this is and how to fix it greatly appreciated!
Hi, I have a Kenmore Dishwasher with a soil separator. I have food particles on my dishes after every load. No idea what I need to do. I suspect I have to clean the soil separator somehow.... but don't know where to start. I've taken screws out of everything and can't seem to figure out how to access where the food blockage would be. Any help would be appreciated.
... Kenmore 15121 Built-in Dishwasher
I have a new FDB520RHS2A Frigidaire dishwasher which remains in the wash cycle after I've started it. It sounds as if it is changing cycles but the wash light stays lit and never switches to rinse. The machine continues to run for hours if I don't stop it. We've checked the drain to the garbage disposal and it is clear. the water temp seems to be hot enough but how do I check that? Any ideas on what we should check before we bring it back to the store? Your help is much appreciated. Thanks!
Hello i have a Baumatic slim line intergrated diswasher . it has 18 lit up on screen but it will not let me set any programme when i press p. It is not starting a wash at all any ideas it did trip once last year and the help line gave me a code to put in after i had unplugged it for 24hrs this seemed to work but i can't remember code any advice appreciated thanks
... Baumatic 18 in. BHD45 Slim-Line Built-in Dishwasher
Hello all, We have an Ikea Whirlpool DWF 416 that is a couple of years old and has never caused any problems. From today the door has stopped shutting properly. The electronics and internal mechanisms seem to be working fine, since when you turn it on the cycle starts - but only if you hold the door shut. Has maybe a catch gone? Any ideas for fixing a door-shutting problem like this? Thanks in advance! Dave
The catch is no longer working. Contact IKEA for the replacement part. I'm sure it's available through EBAY or something, but probably not guaranteed or as reliable. ... Dishwashers
My Amica ZWM 616 Dishwasher won't start. It appears to be an error code, as the wash light is flickering on and off quickly. Any ideas what this is and how to fix it greatly appreciated!
Have you tried a reset by turning the power off at the power outlet ... Dishwashers
Bubbles coming out of door on start My wife started the dishwasher and my daughter started screaming in about a minute. Bubbles were pouring out of the bottom of the dishwasher. We felt like we were in a Lucy Ball TV show. The soap had not even dispensed yet so I have no idea where it came from? Any ideas?
It came from some dishsoap (not dishwasher detergent) Simple solution is add 1 cap of fabric softener to the bottom of the dishwasher and restart ... Whirlpool GU1100XTLB / GU1100XTLQ / GU1100XTLT Built-in Dishwasher
Maytag dishwasher MDB7609AWW2 all the lights come on properly hit the start key and will start for about 30 seconds and then shut off then will not start again. Thought it was in store demo mode so reset that still not working when pressing the start key. Any ideas already tried reseting with the circuit breaker.
... Maytag Dishwashers
I have a bauknecht gsx 4756 that beeps continually when I start it and the start light flashes, I reset it by holding the start button down and reselect the programme but it starts bleeping and returning to the rinse only programme. Can you assist me so I do not have to call out an engineer? Thanks
... Bauknecht 24 in. GSX7551 Built-in Dishwasher
I have a maytag dishwasher mdb5601awb. when I hit the start button nothing happens. I have found the instructions to do a manual test which is hitting the heated dry button 5 times and then the start button. Thinking it will run some test which I have no idea what to look for, it actually runs the machine's wash cycles and clean, dries and tells me it clean with the green light goes on. How do I reset/reboot the machine so it starts by just hitting the start button again?
... Maytag Dishwashers
I have a Siemens dishwasher serie IQ which has had water damage. There has been water pressure on the drain tube. Probably the mashine has been partly filled with drain water. Now it can start and pump out the water, but it never starts any washing program. Well it starts and the time left (e.g. 15 min on the shortest program) is displayed. But then it does not start to wash or count down. Any idea what is wrong or broken? Anyway I can repair or reset the dishwasher?
... Siemens 24 in. SL84A305UC Built-in Dishwasher
I have whirlpool Dish washer model GU 120 ES (bought in 2001). When we start the dish washer cycle the unit starts for a minute, then the "start indicator" light flashes. As indicated in the instructions, we press the "start button" for five (5) seconds, at this time the washer clears the water out and stops. If you can assist this would be greatly appreciated. Thanks Jeff
I called the service tech.... ... Whirlpool Dishwashers
Hello, My Frigidaire dishwasher model number FDB1250REC2 is not starting the wash cycle, instead, the washing light starts blinking continuously when I press start. I turned off the breaker to the dishwasher and tried to start a load again, same problem! I would really appreciate any help that you can give. Thanks so much!
... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher