Having problems with your Dishwashers ?

What is the coldest setting that it can be set to?


Answers :

Usually about 30-35 degrees celsius. I can't be exact as you didn't specify the brand or model of your dishwasher. If you post back with the information, I can give you the exact temperature for your model.
Repair Help & Product Troubleshooting for Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Maytag Plus RSW 2400 side by side refridgerator. It is gradualy getting warmer, both fridge and freeze, the temp control is set to coldest setting. What part do I need to replace?


You will need to replace your defrost system on this unit. It is simple to repair yourself and you will save a lot of money by doing it your self.\015\012\015\012Just give us a call with your model number and we will get the correct parts ... Dishwashers

What is the coldest setting that it can be set to?


Usually about 30-35 degrees celsius. I can't be exact as you didn't specify the brand or model of your dishwasher. If you post back with the information, I can give you the exact temperature for your model. ... Dishwashers

Don't know how to read symbol to make frig less COLD since it is now freezing food in it. Is small part or large part of arrow like symbol the coldest setting.


... GE WB00X6609 OVEN IGNITER REPAIR PART FOR AMANA HOTPOINT MAYTAG ELECTROLUX FRIGIDAIRE WHIRLPOOL AND KENMORE

Purchased in 2003. Dishes were exquisitly clean till 2008. Our water heater temp was set at 140 temp. This heater was replaced with a heater now set at 125 temp. In the past two years dishes are nowhere as clean on the the normal start setting. Should I go to the Pots and Pans start setting to get hotter water or should I turn up my water heater? All this is assuming that water is not hot enough. Does the washer heating element ever burn out?


Try turning on your water at the sink for a while on hot let it run then start the wash cycle that should help. what that will do is let the cold water run out of the pipes and therefore you will have a hot water start. ... Kenmore Dishwashers

I have a Kenmore Elite Ultra Wash Dishwasher 665.1319 and it uses all of the rinse aid added in 1 day. The setting inside is set at the factory set of 2. Any suggestions on how to fix that?


... Dishwashers

The top rack in my dishwashers gets stuck at the second set of caster wheels. The bracket that holds the rack clears the first set very well but for some reason doesnt fit through the second set unless you force them.


... Frigidaire Dishwashers

Carlton Cs1w. Hi I have a Carlton slimline dishwasher. No problem with filling, heating and emptying. But if I set it to full programme it sticks. Starting with pan setting and letting run right through programme it just keeps sticking. On last programme timer moves ok for first 10 or so minutes then gets no further. Tried different settings, checked everything I can think of and cleaned added salt etc. Got given. Last owner only used a few times, moved house and no room for it. But was sitting


... Dishwashers

I have a Honda GCV160 5.5 HP engine, CV-2400-1MHC, 2400psi, 2 GPM Chore Master MI-T-M gas pressure washer, about 5 years old (the manual is dated 2005). I am the second owner and the first owner told me he did not use it very much. I just bought it in July 2010. When I adjust the nozzle the only setting that will clean my timber deck is the high pressure with the narrowest flow. At this setting it will take forever to clean the deck. The setting with a broader coverage and high pres


... Honda Pressure Washers

I have a bosch dishwasher model number SGS0902GB/05. I use tablets instead of detergent. I put the tablet in the Dispenser and close the lid, noproblem. I then set the programme and shut the door, I usually set the programme to delay start so that it washes dishes in the small hours when all are in bed, however, when I have set the programme and close the door within a minute the dispenser assembly opens and the tablet falls into the dishwasher, I then try and put the tablet back in the dispe


Hello Andrew,\015\012\015\012I'm more than happy to give step-by-step instructions for replacing the detergent dispenser, however it's not cheap (about \302\24350) and it probably doesn't need to be replaced. Some of the smaller component ... Bosch Dishwashers

I have the dishwasher model number FGHD2433KF, I have noticed in the last few that I have used my dishwasher no matter what setting I push after a few minutes it jumps to 99+.... Example a push quickwash and start it, the time that shows on the screen is 50, it counts down to 49 then it jumps to 99+. Every setting I originally set starts out at the right time that is listed in my book but then after a few minutes it jumps to 99+. Do I need to call service. I purchased the dishwasher in May of


... Frigidaire FGHD2433K 24 in Builtin Dishwasher

I have recently purchased a kitchenaide dish washer. I'm having trouble with one setting staying on way too long.This setting is the NORMAL WASH SETTING. Why does this function have problems shutt


... Dishwashers

The dishwasher seems to be making excessive noise prior to commencing wash cycle.the eco setting is not functioning but the 65 degree wash setting is. sometimes the wash cycle just doesn't start and all of the wash program setting lights flash repeatedly.


... Smeg 24 in. DWD612SS Built-in Dishwasher

I have an SDMO generating set with a Mitsubishi S3 L2SD engine it is supposed to run at 1500 rpm but goes up and down depending on load, if I set the rpm at no load to 1500 as soon as a load is applied the revs drop and so do the cycles from 50 to perhaps 48, if I set the revs on load, then off load the revs go up and the cycles hit 53 plus which means for example my washing machine does not want to know, I suspect the govenor on the pump but do not want to change the pump if this is within para


Set the no load revs such that you get 51 Hz out of the generator, at 80% load this ought to give you something like 48.5 Hz with less than a 3% drop in output voltage. If not, you might have governor problems but I'd try servicing and adjusting it b ... Karcher 2500 PSI Pressure Washer

I accidently hit the start button twice and, I guess, set the machine for a delayed start. How do I reset it so that I can start it now? And it's (just now) set to the pots and pans (which is fine) and hot dry (which I don't like) and won't let me change the settings


\001 To cancel the delay and start the cycle, press START/RESUME. ... Whirlpool 24 in. GU2500XTPS Stainless Steel Built-in Dishwasher

Bauknecht GSX 4756w when I switch it on and set the dial to the wash setting, I close the door and it sounds as though it is about to start but after 30 secs just starts beeping. When I open it the cycle setting is always reset to rinse. Can't get it to switch on at all.


My dishwasher will not start: Most common d/w power is 120 volts, check for 120 volts with a ... Bauknecht Dishwashers

Dishwasher runs for appx 14 min & stops washing half way thru wash cycle. Timer contunies to run. No drain pump out (nothing). Let dishwasher set idle for appx 1 hour and it will re-set. Set timer forward to end of wash cycle and it will complete rinse and final rinse. Then go to dry. Timer works ok.


This sounds like something is stuck in the drain pump. You can remove the inner cover to look for obstructions. You have a dual purpose motor it does the both circulating and draining. The blockage is causing it to overheat and trip the thermal prote ... Whirlpool DU840CWD Dishwasher

Settings i dont get the setting purpose and dont understand it what does the settings do cuz my washer takes 2 hours for a small amount of disher


Settings should show you how the machine is to function. Do uou have a manual? ... Beko DFN1000X Dishwasher

PROBLEM! Hello, When we turn on the dishwasher and set it to any setting it beeps once, appears to work, then beeps again, and the first light flashes. Then the inside noises stop and the light continues to flash until it is turned off. We have cleaned the filter, and added salt, but this has not affected it at all. Please help! Thank you.


... Indesit 18 in. D41 Slim-Line Free-standing Dishwasher

Setting the water hardness system on Beko DWD 4310W. The handbook instructions seem to be wrong. There's no display panel on the machine as it states, and it tells you to press and hold Start/Stop button and switch the On/Off button, release the On/Off button, press and hold Start/Stop button for 10 seconds,( which you are still pressing anyway!) Then it says the last setting will be displayed on the panel for five seconds. But no panel.Totally confusing.


... Dishwashers

Currently the only setting that is working is Sani Wash. If I use any of the other settings the Intake Drain light comes on and everythig stops. How can the Sani Wash cycle work fine and no Intake Drain light when all other cycles trigger the Intake Drain light and won't continue to wash? Thanks,Karen


I decided I'd wait for the repairman; I don't want to have to pay additional money. ... Dishwashers

Drain pump i bought a new frigidaire dishwasher and setting it up... i removed the drain hose from the drain pump and noticed the pump outlet has a thin rubber diaphram...should i remove it....set up instructions say nothing about it...ty....tim


My husband did remove ours,and we too have a frigidaire 18" built in dishwasher. But ours won't drain, he says it might\015\012be the pump, but he is hoping not.. everything works except when its draining. water just sits there in the bottom.. ... Frigidaire 24 in. FDB510LC Free-standing Dishwasher

Fisher & Pykal Dual Drawer Dishwasher. Suspect after young child played with control buttoms on top drawer the power won't come on. Bottom Drawer works perfectly. Have tried turning unit off at power socket but this has not fixed the problem. Is there a sequence of buttons I have to press to re-set or is there in fact a re-set button?


Press and hold the key or lock button for 5 sec or till you here a beep to unlock. Or till the light goes out above the lock button. You can get your manual here just find your dishwasher.\015\012\015\012 ... Fisher Dishwashers

My Bosch dishwasher is 8 years old and always worked well.. About a year or two ago the dishes started coming out dirtier than when they were put in, frequently encrusted with dirt and shredded dirt which looked like finelly shredded vegetable discards from the garbage disposal. The first set of repairmen sold me a new pump. The next people told me there was nothing wrong with it. The third repairman told me that I have to set the water heater on very High (for $98.00)


I do know this on most dishwashers water temp must be @ least 120 and not exced 150 degree`s before they will go into a complete wash cycle ... Dishwashers

I have a delay button on my dishwasher that has 2, 4 and 8hr delays. I pretty much only use the 2hr setting, but the last time I set it for 2hrs it went to 4 by itself and now it won't go to anything but 4hr. Is there a reset button or something I can do? Thanks, Linda Heydt


... Kenmore Dishwashers

As below dishwasher dwf b10,set to wash on any heated settings and then after app 3 mins it begins to bleep and returns to rinse mode


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0230 seconds